Pocket Radio Sangean DT200v Operating Instruction

  1. On/Off Button
  2. Volume Control
  3.  Earphone Jack
  4.  Lcd Ddisplay
  5.  Tuning Control
  6.  Tuning Control
  7. Band Selection Button
  8. Mono/Stereo Button
  9. Memory Button
10. Select Button
11. Speaker On/Off Switch
12. Battery Compartment
13. Lock Switch
14. Belt ClipLOCATION OF CONTROLSCongratulations and welcome to 
The SANGEAN WORLD OF LISTENING!
To insure proper operation please famililarize
Yourself with these instructions before using your 
New receiver2 

32 3 1 5 6 7 8 134 11 9 10  

41412 

The battery cover is located on the back of the unit.
Slide the cover in the direction of the arrow to gain 
access to the battery compartment(12). Insert  2
AA batteries  into the compartment(12). Make sure 
that  the  batteries are positioned in accordance with 
the diagram located below batteries in battery com-
partment. Replace cover.BATTERY INSTALLATIONNOTE:
                 (1) A flashing E appearing on the LCD 
                       Display indicates a weak battery and...

Adjust the Volume Control(2) by rotating clockwise
to increase Volume.ANTENNA/EARPHONE USEThe cord connecting the headphones to the re-
ceiver acts as an antenna during FM/TV reception
and should be extended as much as possible to
increase FM/TV sensitivity . Insert the Earphones
into the Earphone Jack(3).Abuilt-in Ferrite Ante-
nna is provided for AM reception and it is only
necessary to rotate the radio for maximum signal
strength during AM listeningSPEAKER ON/OFF SELECTORspeaker Output may be turned...

    AM    520-1710KHZ   Internal/Rotate radio for
                                            best reception
    FM     87.5-108MHZ   External/Make sure Head-
                                            phones   are   inserted into 
                                            Headphone Jack
     TV     ch.2-13(VHF)   External/Make sure Head-
                                            phones are inserted into
                                            Headphone JackTUNING THE RADIOBAND  FREQUENCY...

B MANUAL TUNING
      Turn on the Radio by pressing On/Off Button
      (1). Select AM,FM or TV Band by pressing
     Band Selection Button (7).Desired station
      May be selected by either pressing the Tuning
      Control(5)or(6) intermittently until the desired
      Station is reached or pressing and holding the
      Tuning Control until the desired station is
      Reached. Release and push the Tuning
      Control once again to retain the desired 
      Station.C MEMORY TUNING(STAION PRESET)...

     In the LCD Display. You may store a total of
     19 stations in any mix from any band.Original
     stations are eliminated when new stations are
     selected to take their places.D MEMORY TUNING (STATION RECALL)
      Turn on the Radio by pressing On/Off Button
      (1). Select AM, FM or TV Band by pressing
      Band Selection Button (7). Pressing and
      Holding the Select Button (10) for more than
      1/2 second will begin displaying the stored sta-
      tion and their associated numbers...

To prevent accidental changing of any o the radio
settings move the Lock Switch (13)to its up , locked
position(       ). To release simply  move the switch
to its down position. IT IS IMPORTANT TO MAKE
SURE LOCK SWITCH IS IN ITS DOWN POSITION
WHEN RADIO IS TO BE USED AS RADIO IS
COMPLETELY INOPERATIVE UNTIL LOCK
SWITCH IS RELEASED . If the Radio is not to be 
Used for any extended period of time battery power
Savings may be realized by setting-Lock Switch
In its locked (       ) position during...