Plus Projector V3 131 User Manual

RGBSTANDBYVIDEO
FREEZE
MUTEECOAUTO
ASPECT
TIMER VOLKSTNZOOM CANCELQUICK MENU
ENTER
Q1234
PUSH
STANDBY
AUTO
SOURCESTANDBYSTATUS
IMPORTANT* DLP™ (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instru-
ments Incorporated (U.S.A.).
* DMD is an ultra-precise part developed by Texas Instruments (U.S.A.) which takes the place of liquid crystal (in the
projector).
* VGA and XGA are trademarks or registered trademarks of International Business Machines...

E-2
IMPORTANT SAFETY INFORMATION
Precautions
Please read this manual carefully before using your PLUS Data Projector and keep the manual handy for future
reference.
These operating instructions apply to both models V3-131 and V3-111.
The two models are identical in appearance but have different display resolutions and projection distances.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL.
This symbol warns the user...

E-3
Important Safeguards
These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them
carefully and heed all warnings.
Installation
• For best results, use the unit in a darkened room.
• Place the unit on a flat, level surface in a dry area away from dust and moisture.
• Do not place the unit in direct sunlight, near heaters or heat radiating appliances.
• Exposure to direct sunlight, smoke or steam can harm internal components.
• Handle the unit...

E-4
Major Features

World’s thinnest projector – just 35 mm thick
Plus is seeing just how thin the projector can be made. With our retractable lens and other unique ideas and technologies, we
have developed a projector just 35 mm thick, something previously considered impossible.

Designed for portability
The flat design allows the projector to fit in a regular business bag along with documents and a laptop. Thanks to the sliding
type lens shutter, the lens is protected without any parts jutting out....

E-5
Table of Contents
IMPORTANT SAFETY INFORMATION ................................................................................... E-2
Major Features ....................................................................................................................... E-4
Table of Contents ................................................................................................................... E-5
Checking the Supplied Accessories...

E-6
Table of Contents
View ....................................................................................................................................... E-48
Aspect ....................................................................................................................... E-48
Filter .......................................................................................................................... E-48
Vertical Flip...

E-7
RGBSTANDBYVIDEO
FREEZE
MUTEECO
AUTO
ASPECT
TIMER VOL
KSTN
ZOOM CANCEL
QUICK MENU
ENTERQ1234
Checking the Supplied Accessories
Remove the main unit and the accessories from the box and check that the following items are included.
Storage case [1], Cable case [1]
These cases are designed to hold the projector itself and its
accessories.
Use them when storing the projector.
STANDBY
AUTO
SOURCESTANDBYSTATUS
PUSH
HOW TO PUT THE PROJECTOR INTO THE STORAGE CASELower the projector’s lens unit and close the...

E-8
Checking the Supplied Accessories
Expendables and Options
V3 Series lamps
Model V3-120 (ordering code: 28-051)
“WARNING”
Handling the cables supplied with this product, will
expose you to lead, a chemical known to the State of
California to cause birth defects or other reproduc-
tive harm.
Wash hands after handling. 

E-9
Names of the Main Unit Parts
STANDBY
AUTO
SOURCESTANDBYSTATUS PU
SH
Adjuster button [E-26]
(Also on opposite side)Focus ring [E-25] Exhaust vents
Front adjusters [E-26]
Lamp cover [E-62]Ventilation slots Remote control
sensor [E-12]LensVentilation slots
Rear adjusters [E-26] Ventilation holes
Lens shutterLift button
Lens unit
When using the projector

Slide the lens shutter to the left until it stops.
Press the lift button (marked “PUSH”).
The lens unit rises and projecting is now possible.When...

E-10
Names of the Main Unit Parts
S
T
A
N
D
B
Y
A
U
T
O
S
O
U
R
C
E S
T
A
N
D
B
Y P
U
S
H
S
T
A
T
U
S
AUDIOS-VIDEOVIDEO RGB
AUDIO S-VIDEO VIDEO RGB
STANDBY
AUTO
SOURCESTANDBY STATUS
STANDBY indicator [E-22, 57]
STATUS indicator [E-29, 57]
AUTO button [E-27] STANDBY button [E-22]
SOURCE button [E-27]
Built-in Security Slot
This security slot supports the MicroSaver Security System manufactured by
Kensington Microware Inc.
Ventilation slots
Built-in security slot
(See description below.) AC IN connector...