Plus Projector V 339 User Manual

E-30
General Operation
Protecting the Projector with the Security Lock
A password can be registered and the security lock set in order to protect the projector from unauthorized use.
Registering the password
The password is registered using the menus. For instructions on operating the menus, see “Menu Operation Method” on E-33.
(1) Select “Security Lock” in the “Option” menu and set it to “Enable”.
The menu closes and the password registration display appears.
RGB
STANDBY
VIDEO
ASPECT
TIMER VOL KSTN...

E-31
General Operation
If the password input display appears when the power is turned on
When a password has been registered, the “Password” input window appears on the projected image when the power is turned
on. The projector continues projecting this image until the correct password is input. At this time, only the STANDBY button (power
off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see
E-30.
Input the password using the...

E-32
General Operation
Using the Quick Menu
Dual Color Mode Select the preset color mode. See page E-42.
Brightness Adjusts the brightness of the image. See page E-40.
Contrast Adjusts the contrast of the image. See page E-40.
Volume This function adjusts the volume of the built-in speaker. See page E-27.
Content of Adjustments and Settings
Example: Brightness adjustment display
Display Item
Adjustment/Setting This function permits frequently used adjustments to be performed
quickly.
Note that the Quick...

E-33
Menu Operation Method
•This section describes only the menu operation method. Please see this item should you need information while
performing menu operations.
•For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip-
tions.
•Adjustments and settings are made by projecting an image and adjusting to an optimum condition.
•The remote control should be pointed toward the remote control sensor of the projector and operated.
•To return the...

E-34
Menu Operation Method
Menu Screen Names and Functions
Menu Name
This is the title of the menu.
There is a change to the title screen
when the menu is selected.
The cursor moves to the selected
menu name.Cursor (Deep Blue)
This permits setting/adjustment of the
item located at the cursor position.
Item Name
This is the name of the
adjustment or setting.
 Icon: Pressing the ENTER
button displays the sub menu
or setting contents.
Settings Contents Item Name Sub menu
Adjustment Bar
Adjustment Bar and...

E-35
Menu Operation Method
Performing Menu Operations
•Only “Setup”, “Options” and “Info.” can be selected when no signal is being input.
•The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.
•The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected
from the power outlet.
(Note that some items are not stored.)
Preparation Switch on the power of the connected equipment, start the play...

E-36
3Press the SELECT  button to display the item name selection cursor.
Displaying the Cursor
This condition al-
lows selection of the
item name.
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
Menu Operation Method
4Press the SELECT (
) button to align the cursor with the item name
Selection of the Item Name
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKMENU
ENTERQ
1234
Items for which the  Icon Is Displayed
Press the ENTER...

E-37
Menu Operation Method
6Press the MENU button and close the menu display
Closing the Menu
RGB
STANDBY
VIDEO
FREEZE
MUTEECO AUTO
ASPECT
TIMER VOL KSTN ZOOMCANCEL QUICKENTERQ
1234
MENU
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CANCEL but-
ton and close the sub menu.
Press the CANCEL button again to turn off the item name
cursor.
Press the SELECT () button and select the menu
name.
(Menu names cannot be selected when the item name
cursor is...

E-38
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
“Tint” can be adjusted only at the time of NTSC composite/S signal input.
Menu Operation Method
[Example of Menu Display Items at the Time of Input Signal RGB Selection]
RGBComponent
VIDEO
S-VIDEOMenu name
Image
Color
View
BrightnessE-40  Item NameSub Menu
Item Name
ContrastE-40 

Picture Adj.
Fine PictureE-40
H Position
E-41
V Position
E-41...

E-39
RGBComponent
VIDEO
S-VIDEOMenu name
Setup
Info.
Auto SourceE-47  Item Name
Reference
PageSub Menu
Item Name
Auto Power OffE-47 


Menu Position
Lamp ModeE-48
Input Format
E-48
RGB






Video
E-49
S-Video
E-49
Volume
E-49
E-49  
Presentation TimerE-49 
Language
On Screen
Background
Startup ScreenOptionE-50 
E-50 
E-50 
E-51 
Security LockE-51 
StatusE-52 
Factory DefaultE-52 
Lamp Timer ResetE-52 


ResolutionE-53 ...