Plus Projector Up 800 User Manual

Remote Control Features
You can use y our remote contr ol wireless to oper ate y our
UP-800 Da ta Projector.  W ith the remote mouse r eceiver
connected to y our computer, you can also use the pr ojectors
remote control to operate your computers mouse wireless,
too. (See pa ge E-20 to connect the r emote mouse receiver to
y our computer .)
NOTE: If you are using a Macintosh computer, you can click either
the right or left button to activate the mouse.
1Left Click Button
Use this b utton to enter y our...

9Menu Button
Use this b utton to call up the On-Scr een Menu so you can
adjust and set the ima ge. After y ou press this b utton, it
will light up. During this time you can use the mouse
pointer and r ight / left click buttons to mak e menu selec-
tions. If no b uttons are pressed within 10 seconds w hile it
illumina tes,  the light goes out. To r etur n to the main men u
fr om a sub men u, press this b utton again.
0 Mouse Pointer Buttons
Wor ks as a mouse f or your pr ojected computer ima ge.
This b...

E Ð 13
2
350
300
250
200
150
100 5000.0 6.56 13.12 19.69 26.25 32.81 39.37 ft.
(2.0) (4.0) (6.0) (8.0) (10.0) (12.0) (m)
Projection Distance
Diagonal  Image Size (inch)
Projection Distance and Image Size
300Ó
235Ó
WIDE
TELE
27Ó
Width
Height Screen size
(diagonal)
Projection distance
Using A Tabletop Or Cart
1. Place y our Data projector on a f lat le vel surf ace at the
optimal distance fr om the screen or wall so you realize
the siz e image y ou w ant. (A void ha ving br ight room
lighting or sun light...

E Ð 14
When moving the projector, use the carrying case that came with it.
How to store the projector in the carrying case
1.Remove any accessories.2.From the folded state, open the carrying case.
3.Put the projector main unit in the square box section.4.W ith the pr ojector pac ked in the car rying case this w ay,
zip up the sides.
5.Put the notebook PC into the carrying case too.
(Completely close the zipper.)6.Put the remote controller and other accessories into
the carrying case.
* Carry the...

E Ð 15
     WARNING
¥ Only use y our Da ta projector on a solid, level surface. If
the projector f alls to the ground, you can be injur ed and
the pr ojector se verely damaged.
¥ Do not use the Da ta projector w here temper atures v ary
greatly. T he projector m ust be used a t temperatures be-
tween 0ûC (32ûF) and 40ûC (104ûF).
¥ Do not e xpose the Da ta projector to moistur e, dust,  or
smoke. T his will har m the screen image.
¥ Ensur e that you ha ve adequa te ventila tion ar ound y our
Da ta pr...

E Ð 16
Wiring Diagram
Remote Control Guideline
1. Plug the ser ial cable with the r emote mouse r eceiver into your computers mouse por t and restart your computer to g ain
remote mouse control.
2. W hen using the r emote controls built-in infr ared mouse on a la ptop computer, the la ptops mouse , trackball or tr ackpad
will be disa bled. Disconnect the infr ared r eceiv er and r estart your computer to r egain tr ackball or tr ackpad mouse
control.
3. If the scr een g oes blank w hile using your remote...

E Ð 17
Connecting Your PC Or Macintosh Computer
Connecting your PC or Macintosh computer to your UP-800 Data Projector will enable you to project your computers screen
image f or an impr essive presenta tion.  All of these following displa y standards are supported:
T o connect to a PC,  Macintosh or computer equipped with a SuperV GA/VGA adapter or compa tible graphics ada pter, simply:
1. Turn off the power to your Da ta pr ojector and computer.
2. If y our PC does not suppor t SuperVGA/VGA you will...

E Ð 18
Changing Video Resolutions
De pending on y our computers g raphic ca pability,  you ma y
be ab le to select one of se veral resolutions. Generally a com-
puter - either a PC or Macintosh- with 1 me g. of memor y will
run: 640 ´ 480 at 16.7 million colors (24 bit Truecolor)
800  ´ 600 at 65000 colors.
1024  ´ 768 at 256 colors.
As the resolution increases,  the number of colors you can run
decreases.  With 2 meg. of memory a computer will run: 640 ´ 480 at 16.7 million colors (24 bit Truecolor)....

E Ð 19
Connecting Your Document Camera
You can connect y our UP-800 Data Projector to a document camer a. To do so,  simply:
1. Turn off the power to your Da ta pr ojector and document camera.
2. Use a standar d video cable to connect y our document camer a to the Video input on y our Da ta
projector.
3. Tur n on the Da ta projector and the document camer a.
NOTE:   Refer to your document cameras owners manual for more information about your cameras video
output requirements .
Connecting Your VCR Or...

E Ð 20
Connecting Your Remote Mouse Receiv er
The r emote mouse r eceiver ena bles y ou to oper ate y our computers mouse functions fr om the
r emote contr ol. It is a great con venience f or clicking thr ough your computer -generated presenta-
tions.
T o connect the r emote mouse receiver:
1. Turn off y our computer .
2. F or PCs:  Remove y our cur rent mouse and connect the ser ial cable fr om the r emote mouse
receiver to y our PCs mouse por t. (Use the 6-pin ada pter for connecting to a PS/2 computer...