Plus Projector U6 132 User Manual
Here you can view all the pages of manual Plus Projector U6 132 User Manual. The Plus manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
28English 29 English 28English 29 English User Controls Language Language Choose the multilingual OSD menu. Use the or key to select your preferred language. Press “Enter” to finalize the selection.
Page 32
28English 29 English 28English 29 English User Controls Menu Position Choose the menu position on the display screen. Projection Front-Desktop The factory default setting. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection. Rear-Ceiling When you select this function, the projector...
Page 33
![Page 33
30English 31 English
30English 31 English
User Controls
Source Lock
When this function is turned off, the projector will search for other signals if the current input signal is lost. When this function is turned on, it will search specified connection port.
Cooling Mode
Choose “On” to turn on cooling mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the
projector.
Reset
Choose “Yes” to return the display parameters on all menus to the \
factory default...](http://img.usermanuals.tech/thumb/3829/94978/w300_plus-u6-132-manual_d-32.png "Page 33
30English 31 English
30English 31 English
User Controls
Source Lock
When this function is turned off, the projector will search for other signals if the current input signal is lost. When this function is turned on, it will search specified connection port.
Cooling Mode
Choose “On” to turn on cooling mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the
projector.
Reset
Choose “Yes” to return the display parameters on all menus to the \
factory default...")
30English 31 English 30English 31 English User Controls Source Lock When this function is turned off, the projector will search for other signals if the current input signal is lost. When this function is turned on, it will search specified connection port. Cooling Mode Choose “On” to turn on cooling mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Reset Choose “Yes” to return the display parameters on all menus to the \ factory default...
Page 34
30English 31 English 30English 31 English User Controls Lamp Timer Display the cumulative lamp operating time. Lamp Timer Reset Reset the lamp timer after replacing a new lamp. Exchange Message Choose this function to show or to hide the warning message when the exchange message is displayed. The message will show up 30 hours before end of lamp life. ECO Mode Choose “On” to dim the projector lamp which will lower power consumption and extend the lamp life by up to 130%. Choose “Off” to return to...
Page 35
32English 33 English 32English 33 English Appendices Problem: No image appears on screen Ensure all the cables and power cables are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section. Make sure you have removed the lens cap and the projector is switched on. Ensure that the “Picture Mute” feature is not...
Page 36
![Page 36
32English 33 English
32English 33 English
Appendices
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. Example: [Fn]+[F4]
Compaq [Fn]+[F4]
Dell [Fn]+[F8]
Gateway [Fn]+[F4]
IBM [Fn]+[F7]...](http://img.usermanuals.tech/thumb/3829/94978/w300_plus-u6-132-manual_d-35.png "Page 36
32English 33 English
32English 33 English
Appendices
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. Example: [Fn]+[F4]
Compaq [Fn]+[F4]
Dell [Fn]+[F8]
Gateway [Fn]+[F4]
IBM [Fn]+[F7]...")
32English 33 English 32English 33 English Appendices 5. Select the “Change” button under the “Monitor” tab. 6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings. Example: [Fn]+[F4] Compaq [Fn]+[F4] Dell [Fn]+[F8] Gateway [Fn]+[F4] IBM [Fn]+[F7]...
Page 37
![Page 37
34English 35 English
34English 35 English
Appendices
Make sure the projection screen is between distance 4.92 to 38.75
feet (1.5 to 11.8 meters) from the projector. (See page 16)
Problem: The image is stretched when displaying 16:9 DVDThe projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect\
ratio by referring to the following:
Please select 4:3 aspect...](http://img.usermanuals.tech/thumb/3829/94978/w300_plus-u6-132-manual_d-36.png "Page 37
34English 35 English
34English 35 English
Appendices
Make sure the projection screen is between distance 4.92 to 38.75
feet (1.5 to 11.8 meters) from the projector. (See page 16)
Problem: The image is stretched when displaying 16:9 DVDThe projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect\
ratio by referring to the following:
Please select 4:3 aspect...")
34English 35 English 34English 35 English Appendices Make sure the projection screen is between distance 4.92 to 38.75 feet (1.5 to 11.8 meters) from the projector. (See page 16) Problem: The image is stretched when displaying 16:9 DVDThe projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still stretched, you will also need to adjust the aspect\ ratio by referring to the following: Please select 4:3 aspect...
Page 38
34English 35 English 34English 35 English Appendices Problem: Message Reminders Fan failed: Overheated: Replacing the lamp:
Page 39
36English 37 English 36English 37 English Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: Lamp compartment is hot! Allow it to cool down before changing lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb....
Page 40
36English 37 English 36English 37 English Appendices Remark : “*”compressed computer image. Compatibility Modes (U6-112) ModeResolution (ANALOG) V.Frequency (Hz) H.Frequency (kHz) VESA VGA640 x 3507031.5 VESA VGA640 x 3508537.9 VESA VGA640 x 4008537.9 VESA VGA640 x 4806031.5 VESA VGA640 x 4807237.9 VESA VGA640 x 4807537.5 VESA VGA640 x 4808543.3 VESA VGA720 x 4007031.5 VESA VGA720 x 4008537.9 VESA SVGA800 x 6005635.2 VESA SVGA800 x 6006037.9 VESA SVGA800 x 6007248.1 VESA SVGA800 x 6007546.9 VESA...