Plus He 3200 Projector User Manual

E – 31
Menu List
This is a list of menu item names. See the reference page for information about the adjustment and setting
method.
The display contents of the item name will differ depending on the input selection.
Indications such as those below appear along side the input selections (i.e., input signals) that permit adjustment or setting.
Adjustment or setting is permitted for any input that is selected. (The item name will appear in the menu.)
Adjustment or setting is permitted only when the VIDEO,...

E – 32
Picture1
Language En    De    Fr    It    Es
- Menu Position -
Duration 10 sec.Picture2 Setup Info.VIDEO
Option
Option
On-Screen Display Language Settings → Page E-41
Moving the Menu Display Position → Page E-41
On-Screen Display Duration Adjustment → Page E-41
[Common Inputs]
Info.
[VIDEO, S-VIDEO and YCbCr Input Selection]
Saving and Loading of Video Adjustments → Page E-42
Returning to Standard Settings → Page E-43
Resetting the Lamp Timer → Page E-43
Picture1
- Default -
- Lamp Timer Reset -...

E – 33
Video Adjustments [Picture 1]
These are picture-related adjustments.
For information about performing menu operations, see → Page E-28
Using the On-Screen Menus.
Picture1
Brightness 0
Contrast 0Clock frequency 0Phase 0
Color Temp. LowNormalHigh Custom Picture2 Setup Info.RGB
Option
Picture1
Brightness 0
Contrast 0Color 0Tint 0Sharpness 2
Color Temp. LowNormalHigh Custom Picture2 Setup Info.VIDEO
Option
Picture1
Brightness 0
Contrast 0Color 0Sharpness 2
Color Temp. LowNormalHigh Custom Picture2...

E – 34
Color Temperature
Adjusting the White Balance
This is the input picture white color selection
or white and black level correction, and serves
to adjust the color reproducibility.
Press the cursor button () and align the cur-
sor with the desired item, then adjust with the
cursor (
) button.
Low: Warm white (White with heightened yellow)
Normal: The white of sunlight
High: Cool white (White with heightened blue)
Custom adjustments
Press the (
) cursor button and align the
cursor with [Custom],...

E – 35
Clock frequency
Adjusting the Clock Frequency of
the Input Signal
This is adjusted when light and dark vertical
bands appear on the projection screen of the
RGB and YPbPr input signal.
This is usually adjusted automatically at the
time of signal selection; however, this adjust-
ment is made when the automatic adjustment
cannot effectively make the adjustment.
Press the cursor () buttons and align the cur-
sor with [Clock frequency], then use the cursor
buttons (
) to remove the vertical bands...

E – 36
Input Video Adjustments [Picture 2]
These functions adjust the input video signal.
See → Page E-28 Using the On-Screen Menu for information about performing
menu operations.
Picture1
Video Filter 2
3 Zoom Filter
VideoAuto ProScan Mode
Gamma CustomGraphics Film Video
Color SystemAuto Picture2Setup Info.VIDEO
Option
Picture1
Zoom Filter 3
White Peak - Pan -
OffOn Gamma CustomGraphics Film Video Picture2Setup Info.RGB
Option
Auto
ITU-
R.BT601
Picture1
Zoom Filter 3
- Pan -
Format
Color...

E – 37
Input Video Adjustments [Picture 2]
Pan
Movement of Screen Display Position
This is used to move the screen position at the time of
RGB, DVI and YPbPr input selection.
Press the cursor button () and align the cursor with
[Pan], then press the SET button. The menu display will
close and the cursor display will appear.
Adjust the screen position horizontally with the cursor
(
) button and vertically with the cursor () button.
Gamma
Gamma Settings
These are settings of the tone of the image....

E – 38
Color System
Video Signal Color System Settings
These settings are of the color system of the com-
posite video signal.
This function is normally set to Auto. If the color sys-
tem cannot be identified on Auto, set it manually.
Press the () cursor button and align the cursor with
[Color System], then press the SET button.
The color system selection display will appear.
Press the cursor () button to match the composite
video signal system of the input equipment, then press
the SET button to...

E – 39
Setup
These settings are used when setting up the projector.
See → Page E-28 Using the On-Screen Menu for information about performing
menu operations.
Picture1
Keystone ModeNormalFull
BlueBlack
+0 Keystone
OffOn OffOn - Installation -
Background
Auto Power Off
LEDPicture2SetupInfo.VIDEO
Option
Preparation
* Project an image.
* Press the MENU button to display the menu, then select [Setup].
Keystone Mode / Keystone
Adjustment of Keystone Distortion
This adjusts keystone distortion in the vertical...

E – 40
Background
Background Color Settings
This sets the background color when a signal is not
being input to the connector of the projector.
Press the cursor () button and align the cursor with
[Background], then make the selection with the cursor
(
) button.
Blue: Displays a blue screen.
Black: Displays a black screen.
Note: When the menu display is
closed after making the setting, the
color will change to the back-
ground color that has been set.
Setup
Picture1
Keystone ModeNormalFull
Blue Black...