Plus He 3200 Projector User Manual

E – 21
Turning ON or OFF Main Power
POWER
ON OFF
STATUSPOWER/
POWER
ON OFF
POWER/STATUS
Main power ON
Main power OFF
 4  Turning ON or OFF Main Power
Before turning the main power, check that the power is switched off the equipment that is to
be connected and the connection is finished.
To turn on the main power:
Press the POWER switch down until it is in the depressed po-
sition.
On condition
Off conditionLight in orange
Indicator OFF
To turn off the main power:
Press the POWER switch until it is in the...

E – 22
POWER/STATUSON/STANDBYASPECT
Adjustment of the Projection Screen
Operations include the adjustment of the image position that is projected to the screen and the adjustment of the focus as well as
the input selection and the selection of the aspect ratio.
Perform these operations with the power of the connected equipment switched on and the video signal input to the projector.
 6  Projection Screen Position Adjustment
1
Adjust the projection image to the screen
(1) If the image is shifted to the...

E – 23
 8  Input Selection
3
Press the SOURCE button and select
the desired connector.
SOURCE
A press of the SOURCE button will display the
selected input.
Each press of the button moves the selection
one step in the sequence:
S-VIDEO → (VIDEO/YCbCr/YPbPr) → RGB
→ DV I
The selection will not change while Now Search-
ing is displayed.
The input display will remain for a while before
disappearing. To change the duration of the dis-
play, see → Page E-41 On-Screen Display Du-
ration Setting.
S-VIDEO...

E – 24
Input Screen and Aspect Ratio Selection Screen
XXXXX••••••
Select Full
The image is projected to fill the entire
screen.
Aspect 16:9 screens will be longer than wide.
Video signalProjection image with
Through selectionProjection image when
selected
Select Auto (only with RGB or DVI selection)
While maintaining the aspect ratio of the per-
sonal computer, the image is enlarged or
reduced so that no parts protrude beyond
the screen and the image is projected to fill
the screen. Aspect 16:9 screens...

E – 25
Operation with the Remote Control
Point the remote control toward the remote control sensor of the main unit and operate.
ESC
MENU
ASPECT
VIDEO
     /YPbPrON/STANDBY
S
-VIDEORGBDVI
SV CV RGB DV I
SET
ASPECT buttonThis button selects the vertical and horizontal
ratio of the screen of the input video.
These buttons are used for the
selection of the input signal.
For further information about input selection.S-VIDEO buttonThis switches the input to the S-VIDEO signal.VIDEO/YPbPr buttonThe source...

E – 26
Input Selection
Press the desired input selection button.
VIDEO
     /YPbPr S-VIDEORGBDVI
SV CV RGB DVI
S-VIDEO
S-VIDEO
YCbCr
YPbPr VIDEO
RGB
DVI
Input selection display
S-VIDEO button
A press of the button will switch the input to the S-VIDEO
input signal.
VIDEO/YPbPr button
The source selection display will appear. (If the source
selection display is not displayed, press the button again.)
* [AUTO] is selected at the initial setting.
A press of the SET button causes the source selection
display...

E – 27
Selection of Aspect Ratio (i.e., Ratio of Screen Width to Screen Height)
ASPECT
Press the ASPECT button and select the
desired aspect ratio.
Full AspectS-VIDEO16:9(LB)
16:9
Real
Thru
Full Aspect
16:9(LB)
16:9
Real
Thru
S-VIDEO
Full
Auto Aspect
16:9
Thru
DVI
[VIDEO, S-VIDEO and YCbCr Input Selection][RGB, DVI Input Selection]
Aspect Selection Display
A press of the button will display the aspect selection
display.
The aspect ratio is the ratio of the width and height of the
screen.
Press the ASPECT...

E – 28
Using the On-Screen Menu
Only menu operation methods will be described here.
Refer to this page should you need to clarify matters during menu operations.
See the various pages for information about menu functions and performing adjustments and settings.
To perform adjustments and settings, the video is projected and adjustments are made to the optimum condition.
The remote control should be pointed toward the remote control sensor of the projector and operated.
To return the various items that...

E – 29
1
Press the MENU button and display
the menu.
Display of the Menu
Picture1
Brightness 0Contrast 0Color 0Tint 0Sharpness 0
Color Temp. LowNormalHigh Custom Picture2 Setup Info.VIDEO
OptionMENU
2
Press the button again and select the
menu name.
The selected menu name will appear in navy
blue.
Selection of the Menu Name
Picture1
Keystone ModeNormalFull
BlueBlack
+0 Keystone
OffOn OffOn - Installation -
Background
Auto Power Off
LEDPicture2SetupInfo.VIDEO
Option
MENU
Each press of the MENU button...

E – 30
5
Press the ESC button and close the
menu display.
The selected menu name will appear in navy
blue.
Exit
Sub menu items
Items that display only an item name have a
sub menu.
Picture1
Keystone Mode
Keystone
- Installation -
Background
Auto Power Off
LEDPicture2SetupInfo.VIDEO
OptionFloor-Front
Floor-Rear
Ceiling-Front
Ceiling-Rear
Picture1
Keystone ModeNormalFull
BlueBlack
+0 Keystone
OffOn OffOn - Installation -
Background
Auto Power Off
LEDPicture2SetupInfo.VIDEO
Option
SET
1) Press the SET...