Planet Technology Router WRT-415 User Manual

 
 
3.2.3 Advanced 
This screen enables you to configure advanced wireless functions. 
 
Beacon Interval: Type the beacon interval in the field. You can specify a value from 1 to 1000. The 
default beacon interval is 100. 
RTS Threshold: Type the RTS (Request-To-Send) threshold in the field. This value stabilizes data flow. 
If data flow is irregular, choose values between 256 and 2432 until data flow is normalized. 
Fragmentation Threshold: Type the fragmentation threshold in the field. If packet...

 
SSID Broadcast: If disabled, no SSID is broadcast. If enabled, the SSID of WRT-415 will then be 
broadcast to all wireless stations. Stations which have no SSID (or a null value) can then adopt the 
correct SSID for connections to this router. 
3.3 Status 
3.3.1 Device Information 
This screen enables you to view the router LAN, wireless LAN, and WAN configuration. 
 
Firmware Version: Displays the latest build of the WRT-415 firmware. After upgrading the firmware in 
Tools -> Firmware, check this to...

 
3.3.2 Log 
This screen will show you a running log of system statistics, events and activities. The log displays up to 
200 entries. Older entries are overwritten by new entries. You can save logs via the Log Settings option 
-> “Send to”. The Log screen commands and information meaning are as follows 
 
First Page: View the first page of the log message list. 
Last Page: View the last page of the log message list. 
Previous Page: View the page just before the current page. 
Next Page: View the page...

 
 
SMTP Server: Type the SMTP server address for the email that the log will be sent to in the next field. 
Send to: Type an email address for the log to be sent to. Click “Email Log Now” to send the current log 
immediately. 
Syslog Server: Type the IP address of the Syslog Server if you want the WRT-415 to listen and receive 
incoming SysLog messages. 
Log Type: Select what items will be included in the log: 
System Activity: Displays information related to WRT-415 operation. 
Attacks: Displays...

 
3.3.5 Wireless 
This screen will show you which wireless devices that are connected to this WRT-415 via wireless 
interface. 
 
Connected Time: Displays how long the wireless device has been connected to the LAN via the 
WRT-415. 
MAC Address: Displays the devices wireless LAN interface MAC address. 
3.4 Routing 
3.4.1 Static 
You can set parameters by which the WRT-415 forwards data to its destination if your network has a 
static IP address. 
 
Network Address: Type the static IP address your...

 
Network Mask: Type the network (subnet) mask for your network. If you do not type a value here, the 
network mask defaults to 255.255.255.255. Your ISP or network administrator provides you with this 
information. 
Gateway Address: Type the gateway address of your network. Your ISP or network administrator 
provides you with this information. 
Interface: Select the interface WAN or LAN that you will use to connect to the Internet. 
Metric: Select which metric you want to apply to this configuration....

 
 
Network Address: Displays the network IP address of the connected node. 
Network Mask: Displays the network (subnet) mask of the connected node. 
Gateway Address: Displays the gateway address of the connected node. 
Interface: Displays whether the node is connected via a WAN or LAN. 
Metric: Displays the metric of the connected node. 
Type: Displays whether the node has a static or dynamic IP address. 
3.5 Access 
3.5.1 MAC Filter 
This screen enables you to allow and deny user access based upon the...

 
Only allow computers … : All users are denied Internet access except those users listed in MAC table.  
Only deny computers … : All users are allowed Internet access except those users listed in MAC table.  
MAC Table: Use this field to create a table to which Internet access is denied or allowed. The user 
profiles are listed in the table below. 
 
Note: When selecting items in the table at the bottom, click anywhere in the item. The line is 
selected, and the fields automatically load the items...

 
Edit Protocol Filter in List: Use this section to create a profile for the protocol you want to deny Internet 
access to. 
Enable: Click to enable or disable the protocol filter. 
Name: Type a descriptive name for the protocol filter. 
Protocol: Select the protocol (TCP, UDP or ICMP) you want to deny Internet access to from the 
pull-down list. 
Port Range: If you are creating a profile for ICMP, type a minimum and maximum port range in the two 
fields. 
Add: Click to add the protocol filter to the...

 
3.5.4 Virtual Server 
This screen enables you to create a virtual server via the WRT-415. If the WRT-415 is set as a virtual 
server, remote users requesting Web or FTP services through the WAN are directed to local servers in 
the LAN. The WRT-415 redirects the request via the protocol and port numbers to the correct LAN server. 
The Virtual Sever profiles are listed in the table at the bottom of the page. 
 
Enable: Click to enable or disable the virtual server. 
Name: Type a descriptive name for...