Planet Technology Router WRT-415 User Manual

 
Green Link is established 3 
Blinking Green Packets are transmitting or receiving  
Green Link is established 4 
Blinking Green Packets are transmitting or receiving  
- 5 -  

 
Chapter 3 Configure through Web Browser 
Web configuration provides a user-friendly graphical user interface (web pages) to manage your 
WRT-415.  
1. Open your web browser. 
2. Enter the IP address of your WRT-415 in the address field (default IP address is http://192.168.1.1). 
3. A User Name and Password dialog box will appear. Please enter your User Name and Password here. 
Default User Name and Password are both “admin”. Click “OK”. 
 
4. When the first time you enter WRT-415, Setup Wizard will...

 
mask, and domain name. LAN and DHCP profiles are listed in the DHCP table at the bottom of the 
screen. 
Host Name: Type the host name in the text box. The host name is required by some ISPs. The default 
host name is AP-Router. 
IP Address: This is the IP address of the router. The default IP address is 192.168.1.1. 
Subnet Mask: Type the subnet mask for the router in the text box. The default subnet mask is 
255.255.255.0. 
DHCP Server: Enables the DHCP server to allow the router to automatically...

 
MAC Address: If required by your ISP, type the MAC address for the WRT-415 WAN interface in this 
field.  You can also copy the MAC address of your PC’s network card to the WRT-415 WAN interface by 
clicking “Clone MAC address”. 
 
When using PPPoE, enter the following information in the fields (some information are provided by your 
ISP): 
WAN IP: Select whether you want the ISP to provide the IP address automatically, or whether you want 
to assign a static IP address to the WRT-415 WAN interface....

 
 
When using PPTP, enter the following information in the fields (some information are provided by your 
ISP): 
Dynamic IP / Static IP: Select the IP assignment method. 
IP Address: Type the IP address which your ISP provides. 
Subnet Mask: Type the Subnet Mask which your ISP provides. 
Gateway: Type the IP address of Gateway which your ISP provides. 
DNS: Type the IP address of DNS server which your ISP provides. 
Server IP/Name: Type the IP address or name of server which offers Internet service....

 
 
When using L2TP, enter the following information in the fields (some information are provided by your 
ISP): 
Dynamic IP / Static IP: Select the IP assignment method. 
IP Address: Type the IP address which your ISP provides. 
Subnet Mask: Type the Subnet Mask which your ISP provides. 
Gateway: Type the IP address of Gateway which your ISP provides. 
DNS: Type the IP address of DNS server which your ISP provides. 
Server IP/Name: Type the IP address or name of server which offers Internet service....

 
 
Administrator: Type the password the Administrator will use to login to the system. The password must 
be typed again for confirmation. 
User: Users can type a password to be used for logging in to the system. The password must be typed 
again for confirmation. 
3.1.4 Time 
This screen enables you to set the time and date for the routers real time clock, select your time zone, 
specify an NTP server, and enable or disable daylight saving. 
 
Local Time: Displays the local time and date. 
Time Zone:...

 
Set the Time: Select the date and time from the pull-down lists, and click “Set Time” to set the 
WRT-415s internal clock to the correct date and time. 
Daylight Saving: Enables you to enable or disable daylight saving time. When enabled, select the start 
and end date for daylight saving time. 
3.1.5 Dynamic DNS 
You can configure WRT-415 to use DDNS service if you already have a registered DDNS account. 
 
DDNS: You can enable or disable DDNS function here. 
Server Address: WRT-415 supports 3 DDNS...

 
 
Wireless Radio: Enable or disable wireless LAN via the WRT-415. 
SSID: Type an SSID in the field. The SSID of any wireless device must match the SSID typed here in 
order for the wireless device to access the LAN and WAN via the WRT-415. 
Channel: Select a work channel for wireless communications. The channel of any wireless device must 
match the channel selected here in order for the wireless device to access the LAN and WAN via the 
WRT-415. 
3.2.2 Security 
This screen allows you to set...

 
WEP Key: Select the level of encryption you want from the drop-down list. WRT-415 supports 64, and 
128-bit encryption. 
Key 1 ~ Key 4: There are 4 keys available, please ensure you have enter correct number for the key 
values with different Key Length and coding (Hex or ASCII) as 64bit (10 Hex digit / 5 ASCII), 128bit (26 
Hex digit / 13 ASCII) or 256bit (58 Hex digit / 29 ASCII), please select one of them and enter the key you 
want to use. Click “Clear” to erase key values. 
 
Note: 128bit WEP...