Planar Pr3020 Projector Specifcations Manual
Have a look at the manual Planar Pr3020 Projector Specifcations Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 34 Planar manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
User’s Manual – 24 – Setup Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Setup menu. Press the cursor button to move up and down in the Setup menu. Press to change values for settings, and then press Enter or to confirm the new setting. ITEM DESCRIPTION DEFAULT Horizontal Position Press the cursor button to move the image left or right. (Range: 0 – 100) 50 Vertical Position Press the cursor button to move the image up or down. (Range: 0 – 100) 50 Keystone Press the cursor button to correct distortion of the projected image. (Range: -50 – +50) 0 Aspect Ratio Press the cursor button to toggle between the 4:3 standard format and the 16:9 High Definition TV (HDTV) format. 4:3 Advance Feature See “Advance Feature” on page 25. — Reset Resets Keystone and Aspect Ratio to default values — Setup Menu Functions Available for Connected Source Function RGB DVI Component VideoComposite Video S-video H Position x V Position x Keystone correction x x x x x Aspect Ratio x x x x x Advance Feature x x x x x
DLP® Projector – User’s Manual – 25 – Function RGB DVI Component VideoComposite Video S-video Reset x x x x x x = available to video source Advance Feature Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move up and down in the Advance Feature menu. Press to change values for settings, and then press Enter or to confirm the new setting. ITEM DESCRIPTION DEFAULT User Color This feature adjusts the color balance in each color of RGB (red, green, blue), and their neutral colors (cyan, magenta, yellow, white) by using color correction adjustment. Increasing a color’s setting heightens the intensity of that color on the screen, while a lower setting makes the color less intense. Press to select a color. Press to adjust the selected color. (Range: 0 – 100) 80 White Peaking White Peaking increases the output in the brightest whites without changing the blacks and dark grays. It crushes the whites slightly, but it does not appear to clip them or seriously obscure white detail. If you prefer a stronger image, adjust toward the maximum setting. For a smoother, more natural image, adjust toward the minimum setting. Press to adjust the value of white peaking. (Range: 0 – 10) Data source: 10 Video source: 2 Logo Display Press to enable or disable if the logo displays when the projector starts, and when no source is detected. (Range: On – Off) On Fan Speed Press the cursor button to toggle between normal and high fan speed Set Fan Speed to High in altitudes over 1500 meters (5000 feet). Normal
User’s Manual
– 26 –
ITEM DESCRIPTION DEFAULT
Security Lock Press the cursor button to enable or disable Security Lock. When
you enable Security Lock a Register Password dialog box appears:
You can only use the following four cursor buttons,
in the
password fields. Press the cursor buttons five times in any order and
confirm to set the password. When the password is enabled, it must be
entered every time after you power on the projector. See “Setting an
Access Password (Security Lock)” on page 15 for steps on setting the
password. —
Audio Input Press the cursor button to toggle between PC and Video input
channels. Data Source:
PC
Video source:
Video
Reset Press Enter or to reset advance feature settings to default values —
Note:
If Security Lock is enabled, you must enter the password every time the projector is turned on.
However, if the projector is already turned on, Security Lock can be disabled without knowing the
current password.
DLP® Projector – User’s Manual – 27 – User Color Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move to the User Color menu and then press Enter or . Press to move up and down to select a color. Press to change values for settings, and then press Enter or to confirm the new setting. ITEM DESCRIPTION DEFAULT Red Press the cursor button to adjust the red color level. (Range: 0-100) 80 Green Press the cursor button to adjust the green color level. (Range: 0-100) 80 Blue Press the cursor button to adjust the blue color level. (Range: 0-100) 80 Cyan Press the cursor button to adjust the cyan color level. (Range: 0-100) 80 Magenta Press the cursor button to adjust the magenta color level. (Range:0-100) 80 Yellow Press the cursor button to adjust the yellow color level. (Range: 0-100) 80 White Press the cursor button to adjust the white color level. (Range: 0-100) 80 Reset Resets all User Color settings to default values —
User’s Manual – 28 – Config Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Config menu. Press the cursor button to move up and down in the Config menu. Press to change values for settings, and then press Enter or to confirm the new setting. ITEM DESCRIPTION DEFAULT Blank Screen Press the cursor button to select a background color for the blank screen. (Range: Black – Red – Green – Blue – White) Blue Auto Source Press the cursor button to enable or disable automatic source detection. (Range: On – Off) On Auto Power Off Press the cursor button to enable or disable automatic shut-down of lamp after 10 minutes of inactivity. (Range: On – Off) Off Volume Press the cursor button to adjust the audio volume level. (Range: 0 - 8) 4 Menu Position Press the cursor button to position the OSD on screen. (Range: Left – Right – Center – Down – Up) Center Menu Display Press the cursor button to determine the timeout delay of the OSD. (Range: 10 – 20 sec.) 15 Translucent Menu Press the cursor button to set menu screen translucency. (Range: 0% – 100%) 0% Reset Resets all Config items to default values Note: The Config menu functions are available to all video sources.
DLP® Projector – User’s Manual – 29 – Utility Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Utility menu. Press the cursor button to move up and down in the Utility menu. Press to change values for settings, and then press Enter or to confirm the new setting. ITEM DESCRIPTION DEFAULT Video Type Press the cursor button to select the video standard (Range: Auto – NTSC – PAL – SECAM) Auto Video AGC Press the cursor button to enable or disable automatic gain control for the video source. (Range: On – Off) On Press the cursor button to choose from four projection methods: Desktop mount, front of screen Desktop mount, rear of screen Ceiling mount, front of screen Projection Ceiling mount, rear of screen Desktop front Frequency Press the cursor button to adjust the A/D sampling clock. (Range: 0° - 180°) Auto detected Tracking Press the cursor button to adjust the A/D sampling number. (Range: 1 - 100) Auto detected
User’s Manual – 30 – ITEM DESCRIPTION DEFAULT Digital Zoom Digital operation for zoom and pan adjustment. Press Enter or . The Zoom menu appears. Press to zoom in; press to zoom out. Press Enter or to open the Pan menu. (You must zoom in before you can open the Pan menu.) Use the cursor buttons to pan the zoomed image. Press the Menu button to exit. — Reset Resets Video Type, Video AGC, Projection, and Digital Zoom to default values — Utility Menu Functions Available for Connected Source Function RGB DVI Component VideoComposite Video S-video Video Type x x Video AGC x x Projection X x x x x Frequency x x Tracking x Digital Zoom x x x x Reset x x x x x x = available to video source
DLP® Projector – User’s Manual – 31 – Tool Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Tool menu. Press the cursor button to move up and down in the Tool menu. Press Enter or to confirm the new setting. ITEM DESCRIPTION DEFAULT Language Press the cursor to select the desired language English Remote control test Follow on-screen prompts to carry out the remote control test. You are returned to the Tool menu at the end or by pressing the Menu button. USB test Follow on-screen prompts to carry out the USB test. You are returned to the Tool menu at the end or by pressing the Menu button. Button test Follow on-screen prompts to carry out the button test. You are returned to the Tool menu at the end or by pressing the Menu button. Color test Follow on-screen prompts to carry out the color test. You are returned to the Tool menu at the end or by pressing the Menu button. Sound test Follow on-screen prompts to carry out the sound test. You are returned to the Tool menu at the end or by pressing the Menu button.
User’s Manual – 32 – Status Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Status menu. Press the cursor button to move up and down in the Status menu. ITEM DESCRIPTION DEFAULT Video Information Displays the resolution and refresh rate for RGB/DVI mode. Displays the color standard for video mode. Active Source Displays the active source. Software Version Displays information about the software version. Lamp Hours Shows the number of hours lamp has been in use for Eco , Normal and Boost modes. These items are display only. Lamp Mode Press the cursor button to choose the lamp mode. Range: Eco , Normal and Boost. Eco mode uses less power and extends lamp life, but decreases lamp brightness. Boost mode uses more power and reduces lamp life, but increases lamp brightness. Normal Lamp Hour Reset After replacing the lamp, this item should be reset. Refer to “Replacing the Projection Lamp” on page 36. —
– 33 – MAINTENANCE AND SECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer. Important: 1. The lamp contains a certain amount of mercury and should be disposed of according to local ordinance regulations. 2. Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life. Warning: Be sure to turn off and unplug the projector at least an hour before replacing the lamp. Failure to do so could result in a severe burn. Note: Safety glasses should be worn when replacing the lamp while the projector is ceiling mounted. 1. Loosen the two captive screws on the lamp compartment cover (A).