Planar Pd7130 Projector User Manual

S
O
U
R
C
E
M
E
N
U E
N
T
E
R
PD7130 
PD7150
DLP Projector
R
Users Manual
www.PlanarHomeTheater.com 

Planar Systems, Inc.
Corporate Headquarters
1195 NW Compton Drive
Beaverton, OR 97006-1992
Planar Customer Support
Telephone:
US: 1-866-PLANAR1 (866) 752-6271
Outside US: (503) 748-5799
E-mail: [email protected]
Online Technical Library: http://www.planar.com/support
Hours: M-F, 8am-8pm ET, 12pm-12am GMT 

Preface
i
ABOUT THIS MANUAL
This manual is designed for use with the PD7130/PD7150 DLP Front Projector. Information in this 
document has been carefully checked for accuracy; however, no guarantee is given to the correctness 
of the contents. The information in this document is subject to change without notice.
COPYRIGHT
© Copyright 2006
This document contains proprietary information protected by copyright. All rights are reserved. No part 
of this manual may be reproduced by any mechanical, electronic...

ii
Preface
Notices
WARNING!  To meet FCC requirements, a shielded power cord is required in order to prevent 
interference. It is essential that only the supplied power cord is to be used. Use only shielded 
cables to connect I/O devices to this equipment. You are cautioned that changes or 
modifications not approved by the party responsible for compliance could void your authority 
to operate the equipment.
WARNING!  The projector cooling fan continues to run for approximately 90 seconds after the...

Preface
iii
PRODUCT DISPOSAL
This projector utilizes a tin-lead solder, UHP Lamp containing a small amount of mercury. Disposal of 
these materials may be regulated due to environmental considerations.
IMPORTANT RECYCLING INSTRUCTIONS
SYMBOL EXPLANATIONS
REGISTER YOUR PLANAR PRODUCT TODAY
Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and 
services, register your Planar product today. Visit our website:
http://www.planar.com/support/product_registration.html...

iv
Preface 

Contents
I
Contents
Preface ................................................................................... i
Notices .................................................................................. ii
Introduction
Package Contents ................................................................. 2
Features ................................................................................ 2
Components .......................................................................... 3
     Projector (Front...

II
Contents
     Factory Reset........................................................................... 31
Appendix
Maintenance ........................................................................ 34
About the Lamp ................................................................... 35
     Caution Concerning the Lamp ................................................. 35
     Replacing the Lamp ................................................................. 35
     Temperature LED (Temperature...

Introduction
1
Introduction 

2
Introduction
Package Contents
Open the package and ensure that you have the following items:
Features
•  Newly developed LVDS (Low voltage differential signal) chip eliminates Color Breaking phe-
nomena common with previous generation DLPTM projectors
•  Use of high-output lamp realizes both high color purity and high brightness. Natural images 
made possible by high color reproducibility can be created with high-brightness, powerful 
expression capabilities
•  Realizes vivid images using the latest...