Pioneer Rvd Xg10 Projector Specifications
Have a look at the manual Pioneer Rvd Xg10 Projector Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Pioneer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![](/img/blank.gif)
Input status display when a COMP. input is selected Example 3: Status display when video input is selected IN2: 1024*768 15KHz 60Hz/SZT0/DZON0 (Section corresponding to 1024*768 in Example 3) 1024*768, etc.: Resolution 1024*768i, etc.: i is added to indicate an interlaced signal. HDTV: Hi-Vision HDTV input OUT RANGE: The signal is out of the processable range. NO SIGNAL: No signal is input. (Section corresponding to 15KHz in Example 3) Horizontal frequency display. (Section corresponding to 60Hz in Example 3) Vertical frequency display. (Section corresponding to SZT in Example 3) SZT: True mode SZE: Enlarged/reduced mode (Section corresponding to 0 after SZT in Example 3) 0: Compression mode The following is valid with a 1024*768 or higher-resolution signal in true mode. 1: Top left display 2: Bottom left display 3: Bottom right display 4: Top right display 5: Center display (Section corresponding to DZON in Example 3) DZON: Digital zooming is ON. DZOF: Digital zooming is OFF. (Section corresponding to 0 after DZON in Example 3) 0: Standard size 1: 1.5X 2: 2X 3: 3X 4: 4X
![](/img/blank.gif)
3. Muting status (Section corresponding to AOF in Example 2) AON: Audio muting deactivated AOF: Audio muting activated (Section corresponding to VON in Example 2) VON: Video muting deactivated VOF: Video muting activated 4. Menu status MENU: Menu is open. AJY: AJY mode AJYi: AJY mode (when the set has been started in the integrator mode) NORM: AJN mode with the menu closed 5. Volume 6. Status messages INC: Input signal is out of range. NOS: No signal input. PRL: Please replace lamp. Change the lamp now. DMG: Damaged lamp. The power will turn off automatically in about 8 minutes after this message is displayed. NML: Normal status.
![](/img/blank.gif)
---------------------------------------------------------------------------------------------------------------- GPP command: Input GPP[CR] to check the picture and picture quality adjustment values. Example 4: When the video input is selected PICTURE PARAMETERS CNT:- 12 ... Contrast value BRT:- 20 ... Brightness value COL:+ 0 ... Color depth value TNT:+ 2 ... Tint value SHP:- 10 ... Sharpness value VSS:AUT ... Video system setting value Video system setting values AUT: Auto NTS: Fixed at NTSC PAL: Fixed at PAL MPL: Fixed at M PAL NPL: Fixed at N PAL SEC: Fixed at SECAM 443: Fixed at 4.43 NTSC Example 5: When a COMP. input is selected PICTURE PARAMETER CNT:- 12 ... Contrast value BRT:- 22 ... Brightness value FRQ: 800 ... Sampling clock count value PHS: + 8 ... Sampling clock phase value CLM: STD ... Color mode value Color mode values STD: Standard VVD: Vivid colors
![](/img/blank.gif)
---------------------------------------------------------------------------------------------------------------- GAD command: Input GAD[CR] to check the mode setup. Example 6: ADDITIONAL SET UP OUT:LNK ... Computer output setup AIN:LNK ... Audio input setup BGC:BLK ... Background color setup DSP:OFF ... Display setup REV:HOR ... Reversion setup LNG:JPN ... Language setup Computer output setup LNK: Linked IN1: Fixed at COMP. 1 IN2: Fixed at COMP. 2 CRS: Cross Audio input setup LNK: Linked INV: Fixed at video input IN1: Fixed at COMP. 1 input IN2: Fixed at COMP. 2 input Background color setup BLK: Black BLU: Blue Display setup ON: On OFF: Off Reversion setup NOR: Normal VER: Vertical, up/down reversion HOR: Horizontal, left/right reversion FUL: Full (vertical/horizontal) reversion Language setup ENG: English GER: German FRA: French ITA: Italian SPA: Spanish JPN: Japanese --------------------------------------------------------------------------------------------------------------- Note: The GPP and GAD commands are available only in the AJY status with the menu OFF. It is required to initiate the MSY status.
![](/img/blank.gif)
2.1.5 AJY/AJN Commands ---------------------------------------------------------------------------------------------------------------- Function: Switches the adjustment mode through RS-232C ON/OFF. ---------------------------------------------------------------------------------------------------------------- Syntax: AJY[CR], AJN[CR] ---------------------------------------------------------------------------------------------------------------- Equivalent function:: None --------------------------------------------------------------------------------------------------------------- These commands enables the adjustment operations. AJY: Activates the AJY status. Before using a command which is noted to be available in the AJY status, AJY should be issued to activate the AJY status. AJN: Deactivates the AJY status. Before using the Z, DZ, AON/AOF, VON/VOF, ATS, SZT/SZE, FUP/FDW or VOL command, the AJY status should be deactivated. The current AJY status can be checked with the GST command. ---------------------------------------------------------------------------------------------------------------- Note: The AJY status is deactivated when the menu of the set is opened from the remote control unit or main unit. The menu is canceled when the AJY status is activated while the menu is open.
![](/img/blank.gif)
2.2 Setup Commands Command NameFunction 2.2.1 VON/VOF Video muting ON/OFF 2.2.2 AON/AOF Audio muting ON/OFF 2.2.3 CLMS/CLMVColor more (white balance table) setting 2.2.4 VS Video system setting 2.2.5 DSP On-screen display ON/OFF 2.2.6 LG Language setting 2.2.7 RP Display mode in rear projection (ceiling hanging) installation 2.2.8 BG0/BG1 Background color setting 2.2.9 OT Computer output setting 2.2.10 AI Audio input setting 2.2.11 SZT/SZE Computer screen resizing 2.2.12 DZ Digital zooming setting
![](/img/blank.gif)
2.2.1 VON/VOF Commands ---------------------------------------------------------------------------------------------------------------- Function: Video muting setting. ---------------------------------------------------------------------------------------------------------------- Syntax: VON[CR], VOF[CR] ---------------------------------------------------------------------------------------------------------------- Equivalent function:: Remote: [PICTURE MUTE] * Cyclic selection Main unit: None ---------------------------------------------------------------------------------------------------------------- These commands control the video muting. The current video muting status can be checked with the GST command. VON: Deactivates video muting. VOF: Activates video muting ---------------------------------------------------------------------------------------------------------------- Note: These commands are a available only in the AJY status with the menu OFF.
![](/img/blank.gif)
2.2.2 AON/AOF Commands ---------------------------------------------------------------------------------------------------------------- Function: Audio muting setting. ---------------------------------------------------------------------------------------------------------------- Syntax: AON[CR], AOF[CR] ---------------------------------------------------------------------------------------------------------------- Equivalent function:: Remote: [AUDIO MUTE] * Cyclic selection Main unit: None ---------------------------------------------------------------------------------------------------------------- These commands control the audio muting. The current audio muting status can be checked with the GST command. AON: Deactivates audio muting. AOF: Activates audio muting ---------------------------------------------------------------------------------------------------------------- Note: These commands are a available only in the AJY status with the menu OFF.
![](/img/blank.gif)
2.2.3 CLM Command ---------------------------------------------------------------------------------------------------------------- Function: Color mode setting (When the vivid colors is selected, the picture quality can be switched in the integrator mode.) ---------------------------------------------------------------------------------------------------------------- Syntax: CLMS[CR], CLMV[CR] ---------------------------------------------------------------------------------------------------------------- Equivalent function:: COLOR MODE setting in the PICTURE PARAMETER menu (only when a COMP. input is selected) ---------------------------------------------------------------------------------------------------------------- This command sets the color mode. The current color mode can be checked with the GPP command. CLMS: Standard color setting CLMV: Vivid color setting ---------------------------------------------------------------------------------------------------------------- Note: This command is available only in the AJY status when a COMP. input is selected and the menu is OFF.
![](/img/blank.gif)
2.2.4 VS Command ---------------------------------------------------------------------------------------------------------------- Function: Video system setting. ---------------------------------------------------------------------------------------------------------------- Syntax: VSA[CR], VSP[CR], VS3[CR], VSS[CR], VS4[CR], VSM[CR], VSN[CR] ---------------------------------------------------------------------------------------------------------------- Equivalent function:: VIDEO SYSTEM setting in the PICTURE PARAMETER menu (only when the video input is selected) ---------------------------------------------------------------------------------------------------------------- This command is used when the video format is unknown or when the picture quality is poor due to the receiving condition. The current video system setup can be checked with the GPP command. VSA: Standard, automatic setting VSP: Fixed at PAL VS3: Fixed at NTSC VSS: Fixed at SECAM VS4: Fixed at 4.43 NTSC VSM: Fixed at M PAL VSN: Fixed at N PAL ---------------------------------------------------------------------------------------------------------------- Note: This command is available only in the AJY status when the video input is selected and the menu is OFF.