Pioneer Rvd Xg10 Projector Specifications
Here you can view all the pages of manual Pioneer Rvd Xg10 Projector Specifications. The Pioneer manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
2.3.12 SHP Command
----------------------------------------------------------------------------------------------------------------
Function: Picture sharpness adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: SHP{+|-}dd[CR], SHP-[CR], SHP+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -25 to +25 (Default: 0)...](http://img.usermanuals.tech/thumb/5865/95015/w300_pioneer-rvd-xg10-specs_d-40.png "Page 41
2.3.12 SHP Command
----------------------------------------------------------------------------------------------------------------
Function: Picture sharpness adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: SHP{+|-}dd[CR], SHP-[CR], SHP+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -25 to +25 (Default: 0)...")
2.3.12 SHP Command
----------------------------------------------------------------------------------------------------------------
Function: Picture sharpness adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: SHP{+|-}dd[CR], SHP-[CR], SHP+[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: -25 to +25 (Default: 0)...
Page 42
![Page 42
2.3.13 C Command
----------------------------------------------------------------------------------------------------------------
Function: Picture convergence adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: CRL[CR], CRR[CR], CRU[CR], CRD[CR], CBL[CR], CBR[CR], CBU[CR], CBD[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 1 or 2 steps...](http://img.usermanuals.tech/thumb/5865/95015/w300_pioneer-rvd-xg10-specs_d-41.png "Page 42
2.3.13 C Command
----------------------------------------------------------------------------------------------------------------
Function: Picture convergence adjustment.
----------------------------------------------------------------------------------------------------------------
Syntax: CRL[CR], CRR[CR], CRU[CR], CRD[CR], CBL[CR], CBR[CR], CBU[CR], CBD[CR]
----------------------------------------------------------------------------------------------------------------
Adjustment range: 1 or 2 steps...")
2.3.13 C Command ---------------------------------------------------------------------------------------------------------------- Function: Picture convergence adjustment. ---------------------------------------------------------------------------------------------------------------- Syntax: CRL[CR], CRR[CR], CRU[CR], CRD[CR], CBL[CR], CBR[CR], CBU[CR], CBD[CR] ---------------------------------------------------------------------------------------------------------------- Adjustment range: 1 or 2 steps...
Page 43
2.4 Reset Commands
Command Name Function
2.4.1 PPMRST, TITRST Adjustment value reset.
2.4.2 LMPRST Lamp life counter reset.
Page 44
![Page 44
2.4.1 PPMRST and TITRST Commands
----------------------------------------------------------------------------------------------------------------
Function: Adjustment or setup resetting.
----------------------------------------------------------------------------------------------------------------
Syntax: PPMRST[CR], TITRST[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
PPMRST: INITIALIZE in the PICTURE...](http://img.usermanuals.tech/thumb/5865/95015/w300_pioneer-rvd-xg10-specs_d-43.png "Page 44
2.4.1 PPMRST and TITRST Commands
----------------------------------------------------------------------------------------------------------------
Function: Adjustment or setup resetting.
----------------------------------------------------------------------------------------------------------------
Syntax: PPMRST[CR], TITRST[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function::
PPMRST: INITIALIZE in the PICTURE...")
2.4.1 PPMRST and TITRST Commands ---------------------------------------------------------------------------------------------------------------- Function: Adjustment or setup resetting. ---------------------------------------------------------------------------------------------------------------- Syntax: PPMRST[CR], TITRST[CR] ---------------------------------------------------------------------------------------------------------------- Equivalent function:: PPMRST: INITIALIZE in the PICTURE...
Page 45
![Page 45
The list of commands which is cleared by PPMRST or TITRST.
Table 6. PPMRST (When the COMP. 1 or COMP. 2 input is selected)
Command Value After ResetEquivalent Command
FRQdddd(Depends on input)||
PHSdd0PHS0[CR]
PSa(Depends on input)||
CNTdd0CNT0[CR]
BRTdd0BRT0[CR] Table 7. PPMRST (When the video input is selected)
CommandValue After ResetEquivalent Command
CNTdd0CNT0[CR]
BRTdd0BRT0[CR]
COLdd0COL0[CR]
TNTdd0TNT0[CR]
SHPdd0SHP0[CR] Table 8 TITRST
CommandValue After ResetEquivalent Command
CLMa (Note...](http://img.usermanuals.tech/thumb/5865/95015/w300_pioneer-rvd-xg10-specs_d-44.png "Page 45
The list of commands which is cleared by PPMRST or TITRST.
Table 6. PPMRST (When the COMP. 1 or COMP. 2 input is selected)
Command Value After ResetEquivalent Command
FRQdddd(Depends on input)||
PHSdd0PHS0[CR]
PSa(Depends on input)||
CNTdd0CNT0[CR]
BRTdd0BRT0[CR] Table 7. PPMRST (When the video input is selected)
CommandValue After ResetEquivalent Command
CNTdd0CNT0[CR]
BRTdd0BRT0[CR]
COLdd0COL0[CR]
TNTdd0TNT0[CR]
SHPdd0SHP0[CR] Table 8 TITRST
CommandValue After ResetEquivalent Command
CLMa (Note...")
The list of commands which is cleared by PPMRST or TITRST. Table 6. PPMRST (When the COMP. 1 or COMP. 2 input is selected) Command Value After ResetEquivalent Command FRQdddd(Depends on input)|| PHSdd0PHS0[CR] PSa(Depends on input)|| CNTdd0CNT0[CR] BRTdd0BRT0[CR] Table 7. PPMRST (When the video input is selected) CommandValue After ResetEquivalent Command CNTdd0CNT0[CR] BRTdd0BRT0[CR] COLdd0COL0[CR] TNTdd0TNT0[CR] SHPdd0SHP0[CR] Table 8 TITRST CommandValue After ResetEquivalent Command CLMa (Note...
Page 46
![Page 46
2.4.2. LMPRST Command
----------------------------------------------------------------------------------------------------------------
Function: Lamp life counter resetting (The operating hours can be checked in the integrator mode.)
----------------------------------------------------------------------------------------------------------------
Syntax: LMPRST[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function:: LAMP...](http://img.usermanuals.tech/thumb/5865/95015/w300_pioneer-rvd-xg10-specs_d-45.png "Page 46
2.4.2. LMPRST Command
----------------------------------------------------------------------------------------------------------------
Function: Lamp life counter resetting (The operating hours can be checked in the integrator mode.)
----------------------------------------------------------------------------------------------------------------
Syntax: LMPRST[CR]
----------------------------------------------------------------------------------------------------------------
Equivalent function:: LAMP...")
2.4.2. LMPRST Command ---------------------------------------------------------------------------------------------------------------- Function: Lamp life counter resetting (The operating hours can be checked in the integrator mode.) ---------------------------------------------------------------------------------------------------------------- Syntax: LMPRST[CR] ---------------------------------------------------------------------------------------------------------------- Equivalent function:: LAMP...
Page 47
2.5 Integrator Commands (Valid after the integrator mode has started)
2.5.0. How to Start the Integrator Mode
Command NameFunction
2.5.1. GIT Integrator mode setup check
2.5.2. IRC, IGC, IBC Sub-contrast adjustment
2.5.3. IRB, IGB, IBB Sub-brightness adjustment
----------------------------------------------------------------------------------------------------------------
2.5.0 How to Start the Integrator Mode
1. In the standby mode (with the main power ON but the standby LED lit in amber),...
Page 48
![Page 48
2.5.1 GIT Command
----------------------------------------------------------------------------------------------------------------
Function: 1. Picture quality setting when vivid color is selected for COLOR MODE.
2. Time display of ODD and LAMP LIFE.
----------------------------------------------------------------------------------------------------------------
Syntax: GIT[CR]
----------------------------------------------------------------------------------------------------------------...](http://img.usermanuals.tech/thumb/5865/95015/w300_pioneer-rvd-xg10-specs_d-47.png "Page 48
2.5.1 GIT Command
----------------------------------------------------------------------------------------------------------------
Function: 1. Picture quality setting when vivid color is selected for COLOR MODE.
2. Time display of ODD and LAMP LIFE.
----------------------------------------------------------------------------------------------------------------
Syntax: GIT[CR]
----------------------------------------------------------------------------------------------------------------...")
2.5.1 GIT Command
----------------------------------------------------------------------------------------------------------------
Function: 1. Picture quality setting when vivid color is selected for COLOR MODE.
2. Time display of ODD and LAMP LIFE.
----------------------------------------------------------------------------------------------------------------
Syntax: GIT[CR]
----------------------------------------------------------------------------------------------------------------...
Page 49
![Page 49
2.5.2 IRC, IGC and IBC Commands
----------------------------------------------------------------------------------------------------------------
Function: Sub-contrast adjustment
----------------------------------------------------------------------------------------------------------------
Syntax: IRC{+|-}dd[CR], IRC-[CR], IRC+[CR]
IGC{+|-}dd[CR], IGC-[CR], IGC+[CR]
IBC{+|-}dd[CR], IBC-[CR], IBC+[CR]...](http://img.usermanuals.tech/thumb/5865/95015/w300_pioneer-rvd-xg10-specs_d-48.png "Page 49
2.5.2 IRC, IGC and IBC Commands
----------------------------------------------------------------------------------------------------------------
Function: Sub-contrast adjustment
----------------------------------------------------------------------------------------------------------------
Syntax: IRC{+|-}dd[CR], IRC-[CR], IRC+[CR]
IGC{+|-}dd[CR], IGC-[CR], IGC+[CR]
IBC{+|-}dd[CR], IBC-[CR], IBC+[CR]...")
2.5.2 IRC, IGC and IBC Commands
----------------------------------------------------------------------------------------------------------------
Function: Sub-contrast adjustment
----------------------------------------------------------------------------------------------------------------
Syntax: IRC{+|-}dd[CR], IRC-[CR], IRC+[CR]
IGC{+|-}dd[CR], IGC-[CR], IGC+[CR]
IBC{+|-}dd[CR], IBC-[CR], IBC+[CR]...
Page 50
![Page 50
2.5.3 IRB, IGB and IBB Commands
----------------------------------------------------------------------------------------------------------------
Function: Sub-brightness adjustment
----------------------------------------------------------------------------------------------------------------
Syntax: IRB{+|-}dd[CR], IRB-[CR], IRB+[CR]
IGB{+|-}dd[CR], IGB-[CR], IGB+[CR]
IBB{+|-}dd[CR], IBB-[CR], IBB+[CR]...](http://img.usermanuals.tech/thumb/5865/95015/w300_pioneer-rvd-xg10-specs_d-49.png "Page 50
2.5.3 IRB, IGB and IBB Commands
----------------------------------------------------------------------------------------------------------------
Function: Sub-brightness adjustment
----------------------------------------------------------------------------------------------------------------
Syntax: IRB{+|-}dd[CR], IRB-[CR], IRB+[CR]
IGB{+|-}dd[CR], IGB-[CR], IGB+[CR]
IBB{+|-}dd[CR], IBB-[CR], IBB+[CR]...")
2.5.3 IRB, IGB and IBB Commands
----------------------------------------------------------------------------------------------------------------
Function: Sub-brightness adjustment
----------------------------------------------------------------------------------------------------------------
Syntax: IRB{+|-}dd[CR], IRB-[CR], IRB+[CR]
IGB{+|-}dd[CR], IGB-[CR], IGB+[CR]
IBB{+|-}dd[CR], IBB-[CR], IBB+[CR]...