Philips Proscreen Pxg30 Inpact Projector User Manual

11
Remote Control Unit4. Functional Overview
qon
For turning on the projector. (P20)
wD1
For selecting Data 1 input. (P23)
eD2
For selecting Data 2 input. (P23)
rvideo
For selecting Video input. (P31)
tYPbPr
For selecting Y,Pb/Cb,Pr/Cr  input. (P31)
yfeature
For jumping to the Feature Menu.
uMode
For jumping to the Mode Menu. (P17)
iMenu
For activating or de-activating the On-Screen Menu of the
projector. (P18)
oAV Mute 
For muting the sound and picture of the projector. (P22)
!0Device
For jumping to the...

12
Connecting AC Power Cord5. Set Up
Note:
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
To the power cord
Connector on your pro-
jector.
Projector sideAC Outlet side
Ground
To the AC Outlet.(120 V AC)
For Continental EuropeFor the U.S.A. and Canada
This projector uses nominal input voltages of 100-120 V...

13
5. Set UpPositioning the Projector
Positioning the Projector
– This projector is designed to project on a flat projection
surface.
– The projector can be focused from 4.1’ (1.2m) ~ 32.8’
(10.0m).
– Refer to the figure below to adjust the screen size.
Screen
Size
Distance39”
30”
4.1’ (1.2m)
39”
4.1’(1.2m)10.8’(3.3m)16.4’(5.0m)22.0’(6.7m)
Max. Zoom
Min. Zoom 32.8’(10.0m)
10 0 ”150”200”300”
231”
154”
11 5 ”
77”
30”
Min. Zoom Max. Zoom
100”
77”
10.8’ (3.3m)
150”
115”
16.4’ (5.0m)
200”
154”
22.0’ (6.7m)...

14
Adjustable Feet
Moving the projector
5. Set Up
– Do not drop or bump the projector, otherwise damages or
malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by using a courier or transport
service in an unsuitable transport case.  This may cause damage
to the projector.  To transport the projector through a courier or
transport service, consult a Philips Authorised LCD Projector
Dealer.
CAUTION
Dust Cover (supplied) is intended to...

15
6. InstallationConnecting to a Computer
Connecting to a Computer
IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA)
BNC Cable✽
Monitor Output
Desktop type Laptop type
Audio Speaker
(stereo) Audio Amplifier
Audio Cable
(stereo) ✽
Audio Output
Audio Input
Audio 3 in/out Data 3 in
Cables used for connection
Audio 
Cable ✽(stereo)
Note:When connecting the cable, the power
cords of both the projector and the
external equipment should be
disconnected from AC outlet.  Turn the
projector...

16
Connecting to Video Equipment6. Installation
Connecting to Video Equipment
Video Source (example)
Video Cassette Recorder Video Disc Player
Video Cable
(RCA x 1) S-Video
Cable 
Audio AmplifierAudio Speaker 
(stereo)
Audio Cable 
(Stereo)  Use any of Video socket, S-Video
socket, or Y,Pb/Cb,Pr/Cr sockets.
•When both Video socket and S-Video
socket are connected, S-Video socket
has priority over Video socket.
•When both Y-Pb/Cb-Pr/Cr sockets and
S-Video socket are connected,
Y,Pb/Cb,Pr/Cr sockets has...

17
7.OperationRemote Control Operation
Remote Control Operation
Basic operation and preparation of the remote control are provided in the ProntoNEO RU 930 User Guide. Read the manual
thoroughly for proper operation. Make sure to install the batteries into the remote control before use.
Operation
1. Press the DeviceButton to show the Device Overviewscreen.
2. Tap Proj. PXG 30to go into the Projector Menu.
3. Main Menu(1st page) will be displayed. Select a menu page by using Page up / downbuttons or...

18
Operating the On-Screen Menu7.Operation
How to operate the On-Screen Menu
Press Menubutton to display the On-Screen Menu. 
Press Cursor Left/Rightbutton to select a Menu icon to
adjust. Press Cursor Up/Downbutton to select an item to adjust.
(The selected icon is highlighted in orange.)
Press OKbutton to show the Item Data. Press Cursor Left/Right
to adjust the Data. 
Refer to the following pages regarding respective adjustment. Select an item to adjust the value
Adjust the value of the selected item...

19
7.OperationOperating the On-Screen Menu
Menu Bar
PC System Menu
For selecting
computer system
(Refer to P24)
Image  Adjust Menu
For adjusting the
computer image. 
[Contrast/Brightness
/Color Temp.
/White Balance (R/G/B)
/Gamma]
(Refer to P29)
Setting Menu
For changing the
settings of the
projector or reset
Lamp Replace Counter 
(Refer to P36, 37,42)
Sound Menu
For adjusting
volume or
muting sound.
(Refer to P22)
Image Select Menu
For selecting
image level among
Standard, Real and
Image 1 ~ 4.
(Refer...

20
Turning On / Off the Projector7.Operation
Turning On the Projector
Connect the projectors AC power cord into an AC outlet.  The
Power Indicatorlights red(dim), and the Standby Indicator
lights green.2
3
Turning Off the Projector
Press Standby/Onbutton on the top control or offbutton on
the remote control. The message Power off?appears on the
screen.  
Press Standby/Onbutton on the top control or offbutton on
the remote control again to turn off the projector. The Power
Indicatorturns bright red and...