Philips Projector HDP1550 User Manual

  Initial Operation 11
3Push the battery compartment back into the remote 
control until the locking mechanism engages.
Using the Remote Control
The remote control can be used within an angle of 22.5 
degrees and up to 10 meters (32.8 feet) from the 
device. When using the remote control, no obstacle 
should be placed between the remote control and 
remote sensor.
Notice
Normally the batteries will last for around 
one year. If the remote control stops working, 
please replace the batteries. If the...

12Philips · HDP15x0
Initial Installation
1Push the POWER B button for 5 seconds till the 
power indicator turns to red to turn the device on.
2Turn the device towards a suitable projection sur-f a ce  o r  w a l l .  N o t e  t h a t  t h e  d i s t a n c e  t o  t h e  p r o j e c t i o n  
surface must be a minimum of 0.1 meter (0.33 feet) 
and a maximum of 0.5 meter (1.64 feet)
 (see Setting up the Device, page 4). Make sure the projector is in a secure position.
3Use the focus wheel on the font of...

  Connect to the Playback Device  13
4 Connect to the Playback Device
Supplied cables
HDMI cable s
Connecting to Devices with 
HDMI Output
Use the HDMI cable to connect the projector to a com-puter, laptop or others devices.
1Switch the device on using the on/off key.
2Connect the cable to the projector's HDMI socket. 
3Connect the cable to the HDMI socket of the play-back device.
4From the main menu, select HDMI 1,2 or 3 depend-ing on the external device is connected.
Connecting to a Computer...

14Philips · HDP15x0
Connecting Using an Audio/
Video (CVBS) Adapter 
Cable 
Use the projector's audio/video adapter cable (A/V 
cable) (not included) to connect camcorders, DVD 
players or digital cameras. The jacks for these devices 
are yellow (video), red (audio right) and white (audio 
left).
1Connect the A/V adapter to the  socket of the 
projector.
2Connect the video device's audio/video sockets to 
the A/V cable using a conventional composite video 
(RCA) cable.
3From the main menu,...

  Connect to the Playback Device  15
Connecting the headphones
1Before connecting the headphones, turn down the 
volume on the device.
2Connect the headphones to the projector's head-phone slot. The device speakers deactivate automat-ically when the headphones are connected.
3After connecting the headphones, increase the vol-ume to a comfortable level.
WiFiDisplay (Miracast)
1Switch the device on using the on/off key.
2After the initial screen the main menu appears.
3Use the navigation keys to select...

16Philips · HDP15x0
8On the Screeneo projector, to check that it is turned 
off (OFF).
9Remove the digital media on your computer and 
insert it into the port of Screeneo for your digital 
media.
10
11Long press the ON/OFF button on the projector to 
turn it on.
12After the initial screen, the main menu appears. Use 
the navigation keys to select Settings. 
13Confirm with OK.
14Use / to select Maintenance.
15Confirm with OK.
16Use / to select Firmware Update.
17Confirm with OK.
18Use / to select...

  Connect to the Playback Device  17
Start ScreeneoWLink on your PC
1Open the Start menu. Locate and open the Scree-neoWLink tab. Click on ScreeneoWLink or double 
click on ScreeneoWLink icon of your desktop. 
2The ScreeneoWLink V1.2 software opens on the 
screen. 
3Stand on the projector image with the magnifying 
glass and click it.
4Click Search.
5Select and click on the Screeneo where you want to 
connect.
6If necessary, enter password of acces point selected.
You can enjoy the Screeneo as screen for...

18Philips · HDP15x0
5Memory
Inserting a Memory Card
1Insert a memory card with the contacts facing down-wards into the 
/ slot at the back of the 
device. Your device supports the following memory 
cards: SD/SDHC/SDXC/MMC.
2Insert the memory card into the slot until it snaps 
into position.
3Press lightly on the memory card to remove it.
4The memory card is ejected. 
Connecting USB Storage 
Medium
1Connect the USB storage medium to one USB port 
of the device.DANGER!
Inserting a Memory Card!
Never...

  Network 19
6Network
The projector can be connected to the network by a 
network hard-wired cable or through a wireless (Wi-Fi) 
connection.
Use the procedure below appropriate to the type of 
connection you want.
LAN Network
Connecting to the LAN network
1Connect one end of a LAN cable (not supplied) to 
the ETHERNET port of your projector.
2Connect the other end of the LAN cable to the net-work.
3Configure the LAN network settings in manual or 
automatic configuration. 
Automatic configuration
The...

20Philips · HDP15x0
Infrastructure Wireless Network
In an infrastructure network, multiple devices commu-nicate via a central access point (gateway, router). All 
data are sent to the access point (gateway, router) and 
distributed from there.
Switching Wireless 
Networking (WLAN) on/off
Wireless networking is deactivated by default. You have 
the option of turning this function on.
1Switch the device on using the on/off key.
2After the initial screen the main menu appears.
3Use the navigation keys to...