Philips Mx5800sa User Manual

41
English
Tuner Operations
1Press TUNER on the remote (or adjust
SOURCE control on front panel) to select
“FM TUNER” or “MW TUNER”.
2Press 1 2 or use the numeric keypad (0-9)
to select a preset number to begin.
If you use S / T on the front panel for
preset tuning, make sure the system is in
preset tuning mode.  If not, press TUNING.
➜PRESET MODE appears.
3Press and hold PROGRAM (or PROG on
the front panel) until AUTO PROGRAM
appears.
➜If a radio station is stored in one of the
presets, the same radio...

42
EnglishSetting the timer
The system can switch on to DISC or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!–Before setting the timer, ensure that
the clock is set correctly.
–The volume of the timer will increase
gradually to the last tuned volume level.
If the last tuned volume level is too low,
the set will then increase to a
predetermined minimum audible level.
     
SEARCH
SOURCE
CLOCKTIMER
CLOCKTIMER
CLOCKTIMER
2
3
5
4
6
SELECT CLOCK OR TIMER
TIMER...

43
English
Setting the Sleep timer
The sleep timer enables the system to switch
to Eco Power standby mode automatically at a
preset time.
Press SLEEP on the remote repeatedly until it
reaches the desired preset turn-off time.
➜The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™
 OFF ™ 15 …
➜
SLEEP will show on the display panel, except
if OFF is selected.
➜Before the system switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
SLEEP 10 ™ SLEEP 9.... ™...

44
EnglishSound Control
IMPORTANT!For proper surround sound, make sure
the speakers and subwoofer are
connected (see page 10).
Selecting surround sound
Press SURROUND (SURR.) to select :
MULTI-channel, 3D SOUND or STEREO.
➜The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on the
disc.
➜The centre and surround speakers operate
only when the DVD home cinema system is
set to Multi-channel mode.
➜The available output modes for Multi-
channel...

45
English
Switching on/off
Switching to active mode
Adjust the SOURCE control to select :
DISC 1....DISC 5 ™ FM TUNER ™
MW TUNER ™ TV/AV ™ AUX ™ DI ™
DISC 1....
OR
Press DISC/MEDIA, TUNER, TV/AV or
AUX/DI on the remote.
Switching to Eco Power standby mode
Press STANDBY ON (B).
➜ECO POWER button lights up.
➜The display screen will go blank.
Switching to standby mode (view
clock)
Press and hold STANDBY ON (B).
➜The clock appears.
➜While in standby mode, pressing
CLOCK•TIMER button will switch the...

46
EnglishWARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty.  Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
No power.
No picture.
Distorted or poor picture.
Completely distorted picture or black/
white picture.
The aspect ratio of...

47
EnglishThe DVD player does not start playback.
Cannot activate some features, such as
Angles, Subtitles, or multi-language
Audio.
There is no sound from the centre and
surround speakers.
Radio reception is poor.
The remote control does not function
properly.
The timer is not working.
The display panel is dark.
Low hum or buzz sound.–Insert a readable disc with the playback side
facing down.
–Check the disc type, colour system and region
code.
–Check for any scratches or smudges on the
disc.
–Press...

48
EnglishMAIN UNITPower Supply Rating 230 – 240 V; 50 Hz
110 – 127 / 220 – 240 V;
50/60 Hz Switchable
Power Consumption 150 W
Dimensions (w x h x d) 435 x 100 x 360 (mm)
Weight 7.15 kg
SPEAKERSFront speakers / Rear (surround) speaker
System triple driver
Impedance 4 Ω
Speaker drivers 2 x 3” woofer,
1 x 2” ribbon tweeter
Frequency response 120 Hz – 50 kHz
Dimensions (w x h x d) 94 x 280 x 70 (mm)
Weight 1.23 kg/each
CENTRE SPEAKERSystem 5 multi-directional driver
Impedance 4 Ω
Speaker drivers 4 x 2”...

49
English
Analogue:  Sound that has not been turned into
numbers.  Analogue sound varies, while digital sound
has specific numerical values.  These jacks send audio
through two channels, the left and right.
Aspect ratio:  The ratio of vertical and horizontal
sizes of a displayed image. The horizontal vs. vertical
ratio of conventional TVs. is 4:3, and that of wide-
screens is 16:9.
AUDIO OUT Jacks:  Jacks on the back of the
DVD System that send audio to another system (TV,
Stereo, etc.).
Bit Rate:   The...