Philips Mx5700d User Manual

31
English
DVD Menu Options
Setting the digital output
Set Digital Output according to your optional
audio equipment connections.
Follow the steps of “Using the Setup Menu”
and select :
> Digital Output
Off
All
PCM only
Set  Digital  Output
Digital Output
Analog Output Night mode
Speakers
Speaker Layout
PCM Output
Off
Select this to deactivate the digital output.
All
Select this if you have connected the digital
output to an optional piece of audio
equipment that has a multichannel decoder.
PCM only...

32
English
DVD Menu Options
Night mode - turning on/off
Follow the steps of “Using the Setup Menu”
and select :
> Night Mode
Off
On
Set  Night  mode Digital Output
Analog Output
Night mode
Speakers
Speaker Layout
PCM Output
Off
Select this when you want to enjoy the
surround sound with its full dynamic range.
On
Select this to level out the volume.  High
volume outputs will be softened and low
volume outputs are brought upward to an
audible level.  This feature is only available for
movies with Dolby...

33
English
DVD Menu Options
Restricting playback by Parental
Control
(only available in region 1 players)
Some DVDs may have a parental level assigned
to the complete disc or to certain scenes on
the disc.  This feature lets you set a playback
limitation level.  The rating levels are from 1 to
8 and are country dependent.  You can prohibit
the playing of certain discs that are not suitable
for your children or have certain discs played
with alternative scenes.
1In disc mode, press SYSTEM MENU.
2Select...

34
EnglishChanging the password
You can change the four-digit password used
for Parental Control.  The default password is
‘1234’.
1In disc mode, press SYSTEM MENU.
2Select  icon and press 4.
3Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
Move to 
 and press 2.
Move to ‘Password’ and press 2.
__ __ __ __Enter code
Please enter old password Parental Control
PasswordMenu Language
Defaults
4Use the numeric keypad (0-9) to enter
your original four-digit password at “Enter
code”.
➜If you...

35
English
IMPORTANT!
–Make sure the FM and MW antennas
are connected.
–The TUNING button on the front
panel is used to toggle between
frequency tuning and preset tuning.
When in preset tuning mode, pressing
S / T buttons on the front panel
will change the preset number.
Otherwise, pressing  S / T will
change the radio frequency.
Tuning to radio stations
1
Press TUNER on the remote (or adjust
SOURCE control on front panel) to select
“FM TUNER” or “MW TUNER”.
2Press and hold S / T on the remote
until the...

36
EnglishAutomatic presetting
You can start the automatic presetting from a
selected preset number.
1
2
TV/AVDISC/
MEDIATUNERAUX/DI
REPEAT REPEAT DISC SKIPDISC MENU
PROGRAM SYSTEM MENU
DIM SLEEP SUBW TV VOLVOICE MUTE SEATING ZOOM
PREV NEXT
STOP PLAY/PAUSEA-B
VOL
OK
SOUNDSURR.
456 123
789
0
3
FM TUNER
P01
FM 98:00
  AUTO 
PROGRAM
1Press TUNER on the remote (or adjust
SOURCE control on front panel) to select
“FM TUNER” or “MW TUNER”.
2Press 1 2 or use the numeric keypad (0-9)
to select a preset number to...

37
English
Setting the timer
The system can switch on to DISC or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!–Before setting the timer, ensure that
the clock is set correctly.
–The volume of the timer will increase
gradually to the last tuned volume level.
If the last tuned volume level is too low,
the set will then increase to a
predetermined minimum audible level.
     
SEARCH
SOURCE
CLOCKTIMER
CLOCKTIMER
CLOCKTIMER
2
3
5
4
6
SELECT CLOCK OR TIMER
TIMER...

38
EnglishSetting the Sleep timer
The sleep timer enables the system to switch
to Eco Power standby mode automatically at a
preset time.
Press SLEEP on the remote repeatedly until it
reaches the desired preset turn-off time.
➜The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™
 OFF ™ 15 …
➜
SLEEP will show on the display panel, except
if OFF is selected.
➜Before the system switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
SLEEP 10 ™ SLEEP 9.... ™...

39
English
Sound Control
IMPORTANT!For proper surround sound, make sure
the speakers and subwoofer are
connected (see page 10).
Selecting surround sound
Press SURROUND (SURR.) to select :
MULTI-channel, 3D SOUND or STEREO.
➜The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on the
disc.
➜The centre and surround speakers operate
only when the DVD home cinema system is
set to Multi-channel mode.
➜The available output modes for Multi-
channel...

40
EnglishSwitching on/off
Switching to active mode
Adjust the SOURCE control to select :
DISC 1....DISC 5 ™ FM TUNER ™
MW TUNER ™ TV/AV ™ AUX ™ DI ™
MEDIA SLOT ™ DISC 1....
OR
Press DISC/MEDIA, TUNER, TV/AV or
AUX/DI on the remote.
Switching to Eco Power standby mode
Press STANDBY ON (B).
➜ECO POWER button lights up.
➜The display screen will go blank.
Switching to standby mode (view
clock)
Press and hold STANDBY ON (B).
➜The clock appears.
➜While in standby mode, pressing
CLOCK•TIMER button will...