Philips Mx5700d User Manual

11
English
Step 4:Placing the speakers
and subwoofers
For best possible surround sound, all the
speakers should be placed at the same distance
from the listening position.
1Place the left and right front speakers with
subwoofer stands at equal distances from the
TV and at an angle of approximately 45
degrees from the listening position.
2Place the centre speaker above the TV or the
DVD system so that the centre channel’s
sound is localised.
3Place the surround speakers at normal
listening ear level...

12
EnglishStep 6:Connecting TV
IMPORTANT!
–You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
–Connect the DVD system directly
to the TV.
–Scart Video connection provides
higher picture quality and S-Video
connection provides better picture
quality.  These options must be
available on your TV.
– If both Scart Video and S-Video
connections are used to connect to
your TV, the video signal will
automatically switch to S-Video
when you...

13
English
Connections
After everything is connected
properly, plug in the AC power cord to
the power outlet.
Never make or change any connections with
the power switched on.
On the DVD system,
AUTO INSTALL - PRESS PLAY may
appear on the display panel.  Press ÉÅ  on the
front panel to store all available radio stations
or press Ç to exit (see page 35 “Tuner
Operations”).
               DVD VIDEO DIGITAL SURROUND SYSTEMSTO P PLAYPAUSE SEATINGTREBLE
BASSSOURCEVOLUME
PROG TUNING CLOCKTIMER SURROUND...

14
English
Connections (optional)
Connecting a VCR or
Cable/Satellite Box
AUDIO 
OUTS-VIDEO
IN
VIDEO INSCART IN
SCART OUTDIGITAL 
OUT
DIGITAL 
INAUX
INTV
INLINE
OUT AUDIOVIDEO 
OUT
CVBS
S-VIDEOFM ANTENNA MW
L
R
~ AC MAINS
Pb
AUDIO 
OUTS-VIDEO
IN
VIDEO IN
24
3
SPEAKER SYSTEMS (8Ω)
SURROUND CENTER FRONT
L
R
SL
SRCSUB-WOOFER
P-SCANON       OFF
ANT IN
TO TV
~ AC MAINS
SCART IN
1
VCR or
Cable/Satellite Box
Viewing and listening to the playback
1Connect the VCR or Cable/Satellite Box to the
TV as shown....

15
English
Connections (optional)
DIGITAL 
OUT
DIGITAL 
INAUX
INTV
INLINE
OUT AUDIO
VIDEO 
OUT
CVBS
S-VIDEO
FM ANTENNA MW
L
R
~ AC MAINS
DIGITAL INDIGITAL OUT
2
1
SPEAKER SYSTEMS (8Ω)
SURROUND CENTER FRONT
L
R
SL
SRC
SUB-WOOFER
Connecting digital audio
equipment
(for example)
CD Recorder
Listening to the playback
1Connect the DVD system’s DIGITAL IN jack
to the DIGITAL OUT jack on a digital audio
device.
Before starting operation, press AUX/DI on
the remote to select “DI” in order to activate
the input...

16
English
Functional Overview (illustration on page 3)
* = Press and hold the button for more than two seconds.
@SEATING (only available in Multi-channel
mode)
– Turns on/off the seating control diagram on
the TV.  Use the VOLUME control on the main
unit or joystick on the remote to select the
desired seating position.
#SURROUND (SURR.)– Selects multichannel surround, 3D sound or
stereo mode.
$SOURCE– Selects the relevant active mode : TV/AV, DISC,
MEDIA SLOT,  TUNER, AUX or DI.
– DISC: toggles between...

17
English
Functional Overview
Control buttons available on the
remote only
(SYSTEM MENU (DVD mode only)– Enters or exits system setup menu.
)Joystick 1 2 3 4– Selects movement direction in the menu.
– Use 1 2 to select a preset radio station.
¡OK– Confirms a selection.
™DISC SKIP– Selects next disc tray for playback.
£REPEAT– Selects various repeat modes.
≤VOICE (only available in Multi-channel
mode)
– Turns on/off clear voice sound effect.
∞MUTE– Mutes or restores the volume.
§DIM– Turns on/off the dim...

18
EnglishStep 1:Inserting batteries into
the remote control
1
3
2
1Open the battery compartment.
2Insert two batteries type R06 or AA, following
the indications (+-) inside the
compartment.
3Close the cover.
Using the remote control to operate
the system
1Aim the remote control
directly at the remote sensor
(iR) on the front panel.
2Select the source you wish to
control by pressing one of the
source select buttons on the
remote control (for example
TV/AV, TUNER).
3Then select the desired
function (for...

19
English
Step 3:Setting the TV
IMPORTANT!Make sure you have completed all the
necessary connections. (See page 12
“Connecting TV”).
1Adjust SOURCE control until “DISC X”
appears on the display panel (or press
DISC/MEDIA on the remote).
2Turn on the TV and set to the correct video-in
channel.  You should see the blue Philips DVD
background screen on the TV.
➜Usually this channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, or VIDEO. See your TV manual
for more details....

20
English
Getting Started
Step 4:Selecting speaker
layout
1
In disc mode, press SYSTEM MENU.
2Select  icon and press 4.
3Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
Move to 
 and press 2.
Move to ‘Speaker Layout’ and press 2.
      
Personal
4Select the layout that most closely resembles
your speakers’ arrangement, then press OK.
➜The speaker output will adjust
automatically to suit the selected speaker
layout settings based on the seating position in
the middle.  To change the...