Philips Mcd149 User Manual

English
11
General Information/Maintenance
Environmental information
Any unnecessar y packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please obser ve the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old...

12
English
DB15 CONNECTOR
TO MAIN UNIT
SPEAKERS 4
AC MAINS  ~
 1.000
 
Connections
IMPORTANT!
–The type plate is located at the rear of
the system.
–Before connecting the AC power cord
to the wall outlet, ensure that all other
connections have been made.
–Never make or change any
connections with the power switched on.
–High voltage! Do not open.You run the
risk of getting an electric shock.
–The machine does not contain any user-
serviceable parts.
–Modification of the product could result
in hazardous...

English
13
Step 3: Antenna connection
Connect the supplied FM antenna to the
respective terminal. Adjust the position of the
antenna for optimal reception.
     FM Antenna
●For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
Step 4: Connecting TV
IMPORTANT!
–You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
–Connect the DVD system directly to
the TV.
Using Video In jack (CVBS)
1Use the...

14
EnglishUsing an accessory RF modulator
IMPORTANT!
–If your TV set only has a single
Antenna In jack (or labelled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
1Use the composite cable (yellow) to connect the
systems VIDEO jack to the video input jack on
the RF modulator.
2Use an RF coaxial cable (not supplied) to
connect the RF modulator to your TVs RF...

English
15
Connections
Step 5: Connecting the power
cord
IMPORTANT!
–Never make or change any connection
with the power switched on.
      After ever ything is connected properly, connect
the AC power cord to the system and then to
the power outlet.
Optional: Connecting additional
equipment
IMPORTANT!
–Some discs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
–When making connections, make sure
the colour of cables matches the colour
of jacks.
–Always refer to...

16
English
Step 6: Connecting digital
audio equipment
Recording (digital)
Connect the system’s DIGITAL OUT jack to the
DIGITAL IN jack on a digital recording device
(DTS-Digital Theater System compatible, with a
Dolby Digital decoder, for example).
Before operation, set DIGITAL OUTPUT
according to the audio connection.
Connections
 1.000
 
Digital audio  recorde r
pg001-pg039_MCD149-12-Eng 2007.9.13, 15:3516
 

English
17
Controls
Controls on the system
1
DBB
–enables or disables bass enhancement.
2DSC
–selects different types of preset sound equalizer
settings.
3TUNING à / á
Tuner .................... searches for a radio station
Disc ....................... fast searches backward/forward
in a disc at different speeds.
4ECO POWER/STANDBY-ON B
–switches the system on or to Eco-power standby
/normal standby mode.
5ÉÅ
Disc ....................... star ts or interrupts disc playback
Tuner .......................

18
English
Controls
0í/ë
–Disc: skips to the previous/next chapter/title/
track.
–Tuner : selects a preset radio station.
!9
–In DISC mode, to stop playback or clear a
program.
@2;
–In DISC mode, to star t or interrupt playback.
#VOL +/-
–adjusts the volume upward/downward.
–adjusts the hour s and minutes in clock/timer
setting mode.
$MODE
–to select various repeat modes or the shuffle
play mode for a disc.
%SUBTITLE
–selects a subtitle language.
^ SLEEP/TIMER
      Standby mode
*–sets a time for...

English
19
IMPORTANT!
–Make sure to complete the
preparation procedures before operating
the system.
Before using the remote control
1
Pull out the plastic protective sheet.
2Select the source you wish to control by pressing
one of the source select keys on the remote
control (for example DISC, TUNER).
3Then select the desired function (for example
ÉÅ ,   à , á).
Replacing battery (lithium
CR2025) into the remote control
1
Press the slot on the batter y compar tment.
2Pull out the batter y compar tment....

20
English
Preparations
1In stop mode or during playback, press
SYSTEM MENU.
2Press 22/33/5/4 on the remote control to
toggle through the functions and select your
preferential option.
➜Move to SYSTEM SETUP and press 4.
➜Move to one of the following and press 33.
–Setting TV  SYSTEM
Allows you to select the colour system matching
the connected TV set.
NTSC
–If the connected TV is NTSC system, select
this mode. It will change the video signal of a PAL
disc and output in NTSC format.
PA L
–If the connected...