Home > Philips > Home Theater System > Philips Mcd122 User Manual

Philips Mcd122 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Philips Mcd122 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							22
    Select automatic loudness control
    Automatic loudness control increases the treble 
    and bass effect at low volume levels (the higher 
    the volume, the lower the treble and bass 
    levels).
    1  To turn on automatic loudness control, 
    press LOUD/DBB during play until the 
    loudness icon is displayed.
     To turn off automatic loudness 
    control, press LOUD/DBB until the 
    loudness icon disappears.
    Mute sound
    1
      During play, press MUTE to mute/unmute 
    sound.
    Listen through headphone
    1
      Plug a headphone into the  socket on 
    the unit.
    8 Adjust volume 
    level and sound 
    effect
    Adjust volume level
    1
      During play, press VOL +/- to increase/
    decrease the volume level.
    Select a sound effect
    Note
      You cannot use different sound effects at the same 
    time.
    Select a preset sound effect
    1  During play, press DSC repeatedly to 
    select:
    [Classic]
    [Rock]
    [Jazz]
    [Pop]
    [FLAT]
    						
    							23
      »The unit turns on automatically at 
    the set time and switches to the last 
    selected source.
      »To deactivate the alarm timer, select 
    [OFF] (off) at step 6.
    Set the sleep timer
    1
      When the unit is turned on, press SLEEP/
    TIMER repeatedly to select a set period of 
    time (in minutes).
      »The unit turns off automatically after 
    the set period of time.
    Connect other devices
    Listen to an audio player
    You can listen to audio player through this unit.
      
    1  Connect the audio player.
     For audio players with red/white 
    audio output sockets:
    Connect a red/white audio cable (not 
    supplied) to the AUX IN L/R sockets 
    and to the audio output sockets on 
    the audio player.
    9 Other features
    Activate demonstration mode
    You can see an over view of all features.
    1  In standby mode, press  on the main unit 
    to activate the demonstration mode.
      »A demonstration of major available 
    features star ts.
    To deactivate the demonstration mode:
    1 Press  on the main unit again.
    Adjust brightness of display 
    panel
    1
      In standby mode, press MODE/DIM 
    repeatedly to select different levels of 
    brightness for the display panel.
    Set the alarm timer
    1
      Ensure that you have set the clock 
    correctly.
    2  In standby mode, press and hold SLEEP/
    TIMER.
      »The hour digits are displayed and begin 
    to blink.
    3 Press + VOL  - to set the hour, then press 
    SLEEP/TIMER again.
      »The minute digits are displayed and 
    begin to blink.
    4 Press + VOL  - to set the minute.
    5 Press SLEEP/TIMER	
    
    $;
      »[OFF] (off) begins to blink.
    6  To activate the wake-up timer, press + VOL 
    - to select [ON] (on) while [OFF] (off) is 
    blinking.
      »A clock icon appears on the display.
    English
    EN
     
    						
    							24
    10 Product 
    information
    Note
      Product information is subject to change without prior 
    notice.
    =	
    
    
    Q	
    
    Rated Output Power 2X20W RMS
    
    						
    							25
    Supported disc formats
     Digital Video Discs (DVDs)
     Video CDs (VCDs)
     Super Video CDs (SVCDs)
     Digital Video Discs + Rewritable 
    (DVD+RW)
     Compact Discs (CDs)
     
    	
    						
    							26
    11 Troubleshooting
    Caution
      
    Never remove the casing of this unit.
    To keep the warranty valid, never tr y to repair 
    the system yourself. 
    If you encounter problems when using this unit, 
    !	!#
    
    /
    	%#
    (	/
    ser vice. If the problem remains unsolved, go to 
    the Philips web site (www.Philips.com/suppor t). 
    When you contact Philips, ensure that your 
    unit is nearby and the model number and serial 
    number are available.
    No power
      {Ensure that the AC cord of the apparatus 
    is connected properly.
      {Ensure that there is power at the AC 
    outlet.
      {As a power-saving feature, the system 
    switches off automatically 15 minutes after 
    track play reaches the end and no control 
    is operated.
    No disc detected
      {Inser t a disc.
      {Check if the disc is inser ted upside down.
      {Wait until the moisture condensation at 
    the lens has cleared.
      {Replace or clean the disc.
      {
    						
    							27
    disc play reaches the end and no control is 
    operated.
    Poor radio reception
      {Increase the distance between the unit and 
    your TV  or VCR.
      {Fully extend the FM antenna.
      {Connect an outdoor FM antenna instead.
    Audio or subtitle languages cannot be set
      {The disc is not recorded with sound or 
    subtitles in multiple languages.
      {The audio or subtitle language setting is 
    prohibited on the disc.
    %
    	
    |=*
    
      {!$%
    ##
    
    	!
    						
    							© 2011 Koninklijke Philips Electronics N.V.
    All rights reserved.
    MCD122_98_UM_V3.0 
     
    						
    All Philips manuals Comments (0)

    Related Manuals for Philips Mcd122 User Manual