Philips Mcd122 User Manual

12
Option 3: Connect through 
composite video
 
1  Connect the supplied composite video 
cable to:
 the VIDEO OUT socket on this unit.
 the video input socket on the TV.
Connect audio cables
 
1  To play sound from the TV through this 
unit, connect audio cables (red/white - not 
supplied) to:
 the AUX IN L/R sockets on this unit.
 the audio output sockets on the TV.
TV
8
TV
L  AUDIO OUT  R
8
Note
  !
/@@
(	
@%
when a progressive scan TV is connected....

13
4 Get started
Caution
  
Use of controls or adjustments or performance of 
procedures other than herein may result in hazardous 
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in 
(;
If you contact Philips, you will be asked for the 
model and serial number of this apparatus. The 
model number and serial number are on the 
bottom of the apparatus. Write the numbers 
here: 
Model No. ____________________________
Serial No....

14
3  Turn on the TV and switch to the correct 
video-in channel in one of the following 
ways:
 Go to the lowest channel on your TV, 
then press the Channel Down button 
until you see the blue screen.
 Press the source button repeatedly on 
the remote control of your TV. 
Tip
  The video-in channel is between the lowest and highest 
channels and may be called FRONT, A/V IN, VIDEO etc. 
See the TV user manual on how to select the correct 
input on the TV.
Select the correct TV system
Change this...

15
5 Play
Note
  	!
$	)$##;
Play a disc
Caution
  
Never look at the laser beam inside the unit.
  Risk of product damage! Never play discs with 
accessories such as disc stabilizer rings or disc 
treatment sheets. 
  Never put any objects other than discs into the disc 
compar tment.
1 Press DISC to select the DISC source.
2 Press  on the front panel.
  »The disc tray opens.
3  Place a disc onto the tray and press .
  »Ensure that the label faces up.
4  Play star ts...

16
Play from USB
Note
  Ensure that the USB device contains playable music, 
pictures or video.
1  Inser t the USB device.
  
2 Press USB to select the USB source.
3 Press / to select a folder, then press OK 
	

$;
4 Press /	
	#
$	!#
;
5 Press  to star t play.
 To stop play, press 
.
 To pause or resume play, press 
.
 
	
	!@
}	)
/.
 To return to the upper-level menu, 
press DISC MENU, and then press 
OK 	

$;
Play DivX video
~...

17
Play control
=	>
?		

1  During play, press MODE/DIM repeatedly 
	
		
	

	!!#?
mode.
 To resume normal play, press MODE/
DIM repeatedly until no option is 
displayed.
Repeat A-B  (DVD/VCD/CD/MP3/
@JQ
1  During music or video play, press A-B at 
the star t point.
2 Press A-B at the end point.
  »The selected section star ts to play 
repeatedly.
 To cancel repeat play, press A-B again.
Note
  The section A and B can be set only within the...

18
Change the audio channel
Note
  This feature is only available for VCD/DivX play.
1  During play, press AUDIO repeatedly to 
select an audio channel available on the 
disc:
 Mono Left
 Mono Right
 Stereo
Select a camera angle
Note
  This feature is only available for DVDs recorded with 
multiple camera angles.
1  During play, press ANGLE/PROG 
repeatedly to select a camera angle.
Picture view options
Preview pictures
1  During play, press .
  »The pictures in the current folder are...

19
[All] – If the connected device suppor ts 
multi-channel audio formats, select this 
option.
[Night Mode]
Make loud sound level softer and soft sound 
level louder so that you can watch the DVD 
movies at a low volume, without disturbing 
others.
[On]

20
[Parental Control]
Restricts access to discs that are unsuitable for 
children. These types of discs must be recorded 
with ratings.
Press OK.
Select a rating level, then press OK.
Press the numeric keys to enter the password.
Note
  Rated discs above the level you set in [Parental 
Control](
	
%;
  The ratings are countr y-dependent. To allow all discs to 
play, select [8. Adult].
  Some discs have ratings printed on them but are not 
recorded with ratings. This function...

21
Program radio stations 
manually
Note
  You can program a maximum of 20 preset radio 
stations.
1  Tune to a radio station.
2 Press ANGLE/PROG to activate 
programming.
3 Press / to allocate a number from 
1 to 20 to this radio station, then press 
ANGLE/PROG	

$;
  »!	$%	!#(
of the preset station are displayed.
4  Repeat the above steps to program other 
stations.
Note
  To overwrite a programmed station, store another 
station in its place.
Tune to a preset radio...