Philips Laserfax 935 User Manual

							Telephone Functions11
EN
4 Telephone Functions
Type 3 (mit Telefon)(LPF¦925, LPF¦935)Connecting Additional TelephonesFor information on how to connect additional telephones
and which functions are available to you, please refer the
chapter on Telephone Connections and Additional Devic-
es, Page 29.
Making Telephone Calls on the 
Machine
Dial the desired telephone number. There are multiple
ways to do this. Then lift up the handset.
Direct Dialling
Manual dialling: Dial the desired telephone number
with the number pad.
Telephone BookTelephone book register: with the keys (A—Z) you
can access entries saved in the telephone book. Enter the
initial letters or the name of the desired entry. Your device
will show you the telephone book entries for the corre-
sponding letters. Select an entry using [.
Using the Telephone Book
Redial List
Redial list: Press @ù. Use [ to select an entry from
the list of the dialled numbers.
Caller ListCalling List: Press ú and @ù. Use the [ to select
an entry from the list of callers.
CLIP Prerequisite
Getting outside linePABX SystemsPrivate branch exchanges (PABX) are typical in many of-
fices and some households. You must dial an outside line
access code in order to get a connection to the public tele-
phone network (PSTN) from a PABX.
Enter the outside line access code with which you reach the
public telephone network before you enter the desired
number or select a stored entry. The outside line access
code is usually  0.
Outside Line Access Code Error
Setting up an extension
Chain Dialling
You can combine and edit manually entered digits and
saved entries, before the dialling process starts. If you have
saved, for example, the telephone number prefix of an in-
expensive telephone service provider (call-by-call) as a tel-
ephone book entry, select this entry and manually enter
the subsequent telephone number or select another saved
entry.
Insert Dialling PauseInsert Dialling PauseIt may be necessary to insert a dial pause in telephone
number, for example, for a direct-inward dialling number,
a sub-address or in a long distance number. Press ú and
Rø. The second part of the number is dialled only after a
short pause.
Dialling with the Handset Re-
placed
Dialling with the Handset ReplacedPress μ to dial without lifting up the handset. You will
hear the dial tone from the loudspeaker; the dialling proc-
ess will commence immediately.
Telephone BookHelp 4 · Telephone book
Telephone Book
Call the telephone book functions using am: You can
store new entries, search for entries as well as set and edit
groups. You can save up to 200 entries in the telephone
book of your device.
Cursor navigation 1
Saving Entry
1Press am.
2Using [ select 
ADD NAME.
3Confirm with OK.
4Enter the name using the keys (A—Z).
5Confirm with OK.
6Enter the number using the number pad.
7Confirm with OK.
8Select the speed for fax transmissions to this recipient.
Normally you can select the highest speed. Set a lower
transmission speed if you are sending faxes into net-
works with poor line quality.
9Confirm with OK. The entry is saved. You can also lift up the receiver first, then dial a
number. The dialling process begins immediately.
You can also call the telephone book entries by press-
ing am and select using [ 
SEARCH.
The function Search works even while you are con-
versing on the telephone.
If you are loading entries from the telephone book, it
is possible to edit the numbers after you have loaded
them. For example, you can add or delete prefixed
numbers or direct dial numbers.
For this function to work, the caller line identifica-
tion (CLIP) must be activated for your telephone
connection (country and network dependent). The
number and name will not be shown if the caller sup-
presses his number.
In rare cases, the outside line access code may be a
different number or a two-digit number. For older
telephone systems, the outside line access code can be
R (= Flash). Press Rø to enter this outside line ac-
cess code. If the connection to the public telephone
network is not possible, contact your telephone sys-
tem supplier.
If you operate your device permanently at an exten-
sion, store the outside line access code with the 15
function (see page 29).
Press ¨, 4 and OK to print a list of all saved en-
tries and groups in the telephone book.
You can move the cursor using [. Use C to delete
individual characters. Press j to close the menu and
return to the starting mode.
Enter capital letters by pressing and holding ú
button. You can enter special characters using ½.
To insert special characters and symbols, press
;ü. Press ûü to insert language specific special
characters. Select with [. Confirm with OK.
Downloaded From ManualsPrinter.com Manuals 
						

							12Philips LPF 920 · 925 · 935 · 940
EN
Edit Entry
1Press am.
2Using [ select 
MODIFY.
3Confirm with OK.
4Enter the initial letters or select the entry you would
like to change with [.
5Confirm with OK.
6Change the stored name, the number and the transmis-
sion speed.
7Confirm the changes by pressing OK.
Deleting an Entry
1Press am.
2Using [ select 
CANCEL.
3Confirm with OK.
4Enter the initial letters or select the entry you would
like to delete with [.
5Confirm with OK.
6Confirm the deletion with OK.
GroupsGroupsYou can combine several telephone book entries into a
group. A message is sent to all members of this group in
succession. Your device can store 10 different groups with
up to 199 entries.
Creating Group
1Press am.
2Using [ select 
ADD LIST.
3Confirm with OK.
4Enter a name for the group.
5Confirm with OK.
6Press am and add entries from the telephone book.
Enter the initial letters or select using [.
7Confirm with OK.
8Press am and add additional recipients to the group.
9Press OK to end the input.
10Enter a group number from 1 to 9.
11Confirm with OK. The group is now saved.
Edit Group
1Press am.
2Using [ select 
MODIFY.
3Confirm with OK.
4Using [ select the group you would like to edit.
5Confirm with OK.
6If necessary, enter a new name for the group.
7Confirm with OK.
8You can delete or add entries. Use C to delete individ-
ual recipients. Press am to add a recipient from the
telephone book.
9Confirm with OK.10If necessary, enter a new number for the group.
11Confirm with OK.
Deleting a Group
1Press am.
2Using [ select 
CANCEL.
3Confirm with OK.
4Select the group that you would like to delete.
5Confirm with OK.
6Confirm the deletion with OK.
Calling Line Identification (CLIP)Function is not supported in all countries and networks(Function is not supported in all countries and
networks)
CLIP DefinitionThe number of an incoming call appears on the display.
For this function to work, the Calling Line Identification
Presentation (CLIP) must be activated for your telephone
connection. Enquire with your telephone company. Caller
Line Identification may be associated with a fee.
Setting the Country
Missed CallsMissed CallsIf you receive a telephone call during your absence, the
symbol ž will appear. The caller’s number will appear in
the display. Your device will store the telephone numbers
of the last 10 calls.
1Press ú and @ù. 
2Use the [ to select an entry from the list of callers.
New entries are marked with a star *.
3To call back, pick up the handset.If the Caller Line Identification does not work even
though the function is activated for your telephone
connection, check if you have set the correct country
(also see Chapter Settings, page 26)
If the number of the rings has been set to 
0 with
function 17, then the telephone numbers of call-
ers who have directed their calls to additionally
connected telephones are not shown.
Downloaded From ManualsPrinter.com Manuals 
						

							Fax13
EN
5Fax
Help 3 · Fax Journal
Loading Documents
Sending a Fax
Sending a FaxDocument FormatsUse documents with size A4 · 210¦×¦297 millimetres
with 60¦–¦90¦g/m2. Do not use any documents that are
smaller than A4. You can insert up to 20 documents at a
time.
1Insert the documents face down into the document
feeder. The lower most document will be fed in first.
You can insert up to 20 documents at a time.
2Push the document guide inwards, so that it lies level
on the documents.3Set the desired resolution. You can choose between
NORMAL (for documents without special features),
h/FINE (for texts with small print or drawings), f/
SFINE (for documents with many details) und x/
PHOTO (for photos). Press fx. The symbol of the
selected resolution appears in the display.
4Dial the desired number. There are several ways to do
this:
5Press o.
Manual dialling: Dial the desired telephone number
with the number pad.
Telephone BookTelephone book register: with the keys (A—Z) you
can access entries saved in the telephone book. Enter the
initial letters or the name of the desired entry. Your device
will show you the telephone book entries for the corre-
sponding letters. Select an entry using [.
Using the Telephone Book
Redial List
Redial list: Press @ù. Use [ to select an entry from
the list of the dialled numbers.
Caller ListCalling List: Press ú and @ù. Use the [ to select
an entry from the list of callers.
CLIP Prerequisite
Manually Sending a Fax
1Insert the document.
2Enter the desired number using the numeric keypad or
select a saved entry.
3Press μ.
4Press o. Press ¨, 3 and OK to print the fax journal of the
last 30 transmissions.
Do not insert any documents into the machine
that...
... are wet, have been edited with correction fluid, are
soiled or have a coated surface.
... are written on with a soft pencil, with paint, chalk
or charcoal.
... originate from newspapers or magazines (printing
ink).
... are held together with office or notebook staples or
with tape or glue.
... are pasted with note papers.
... are creased, crumpled or torn.
As much as possible, use fax documents printed with
darker coloured text (black or dark-blue). Yellow, or-
ange and green are not suitable.
The contrast setting is automatically adjusted to
the document. If you would like to specify the
contrast yourself, use function 24 Sending Fax
Later (page 14).
Press j to eject the documents without sending
them.
With function 16, you can select the default res-
olution setting (also see chapter Set Resolution,
page 27).
If the subscriber is busy, the device dials the
number again after some time. Press j, in order
to cancel the transmission process. After the
transmission, the machine prints out a transmis-
sion report depending on the settings.
You can also call the telephone book entries by press-
ing am and select using [ 
SEARCH.
The function Search works even while you are con-
versing on the telephone.
If you are loading entries from the telephone book, it
is possible to edit the numbers after you have loaded
them. For example, you can add or delete prefixed
numbers or direct dial numbers.
For this function to work, the caller line identifica-
tion (CLIP) must be activated for your telephone
connection (country and network dependent). The
number and name will not be shown if the caller sup-
presses his number.
Downloaded From ManualsPrinter.com Manuals 
						

							14Philips LPF 920 · 925 · 935 · 940
EN
Direct Inward Dialling or Select-
ing Sub-address
Direct inward dialling or sub-addressYou can send a fax to a direct-inward dialling number or a
sub addressor or call from a direct-inward dialling number
or sub address - for example to use a certain service of a fax
database provider. For this purpose, attach the direct-in-
ward dialling number or sub address with a short dialling
pause to the fax number.
1Enter the desired number using the numeric keypad or
select a saved entry.
2Press ú and Rø.
3Enter the direct-inward dialling number or sub address.
4Press o. The direct-inward dialling number or sub ad-
dress is dialled only after a short pause.
Listening while a connection is es-
tablished 
Listening while a connection is establishedYou can listen while a connection is established, for exam-
ple if a fax transmission constantly fails.
Enter the desired number using the numeric keypad or se-
lect a saved entry. Press μ.
No hands-free operation
BroadcastingBroadcastingYou can send one fax to multiple recipients in succession.
Entering Recipients Individually
1Insert the document.
2Enter the desired number using the numeric keypad or
select a saved entry.
3Press À.
4Enter the next telephone numbers. Between the indi-
vidual recipients, press À. You can enter up to 10 re-
cipients.
5Press o. The device transmits the fax message succes-
sively to all recipients.
Sending a Fax to a Group
1Insert the document.
2Enter the initial letters or select a group using [.
3You can enter additional groups or individual numbers.
Press À.
4Enter the next telephone numbers. Between the indi-
vidual recipients, press À. You can enter up to 10 re-
cipients.
5Press o. The device transmits the fax message succes-
sively to all recipients.
Sending Fax Later (= Timer Func-
tion)
Delayed Fax TransmissionIf you would like to make use of the lower telephone tariffs
or if the recipient can be reached at some specific time on-
ly, you can send the fax at a later time – within 24 hours.
1Insert the document.
2Press OK, 24 and OK.
3Enter the desired number using the numeric keypad or
select a saved entry.
4Confirm with OK.
5Enter the time, at which the document should be trans-
mitted, e.g. 14 00 for 2 pm.
6Confirm with OK.
7Using [, select the desired contrast.
8Confirm with OK. After a short warm up phase, the
device will read the document into the memory and
will send out the fax at the specified time.
Jobs
Using Fax TemplatesHelp 8 · Fax Templates
Fax Templates
Five fax templates, which you can use, are stored in your
device. With these templates you can quickly create, for ex-
ample, a short fax note or an invitation.
1Press OK, 29 and OK.
2Use [ to select the template you would like to print.
3Confirm with OK. The device prints the template.
4Fill the template and send it to the desired recipient per
fax.
Fax ReceptionFax Switch
Memory
If you have not changed the factory settings, received faxes
will be printed out automatically. If there is no paper or
toner in your device, the device will store incoming fax
transmissions in its memory. The green lamp â/_ on
the panel will flash whenever there is a fax present in the
memory.  After you have loaded paper into the device or
inserted a new toner cartridge, the saved messages are
printed. Hands-free operation is not possible with this func-
tion. You cannot answer if the subscriber picks up.
You can interrupt the process at any time, by
pressing j.
You can also call the groups by pressing am
and select using [ 
SEARCH.
You can interrupt the process at any time, by
pressing j.
If your machine cannot reach a recipient, the fax
message is sent to the other recipients. After the
machine has called all recipients, it once again di-
als the numbers that previously could not be
reached.
You can enter further recipients. Between the in-
dividual recipients, press À.
To cancel a scheduled fax transmission, simply delete
the document from the jobs list (also see chapter
Jobs, page 15).
You can also print the fax templates by pressing ¨,
8 and OK.
The built-in fax switch of your device distinguishes
between fax messages and telephone calls. You have
different options available (also see chapter Setting
the Fax Reception Mode, page 28).
Downloaded From ManualsPrinter.com Manuals 
						

							Fax15
EN
Memory The fax memory can store up to 100 pages (LPF¦920,
LPF¦925, LPF¦935) or 400 pages (LPF¦940). Follow the
specifications in the technical data.
Memory
Receiving Fax ManuallyReceiving Fax ManuallySelect manual reception under fax reception mode (see
Chapter Setting the Fax Reception Mode, page 28). The
device will not receive faxes on its own. This setting is use-
ful, when you want to receive faxes via a modem connected
to a computer. You can start fax reception manually, by
pressing o.
Deactivating Automatic Fax 
Printout
Deactivating Automatic Fax PrintoutYou can secure your fax reception with a code. In that case,
incoming faxes are not printed out, but rather are stored in
the fax memory. Only after entering a PIN code can you
print out these fax transmissions.
Entering the PIN Code
1Press OK, 27 and OK.
2Using [ select 
ANSWER CODE.
3Confirm with OK.
4Enter a four-digit PIN code.
5Confirm with OK.
Switching On and Off
1Press OK, 27 and OK.
2Using [ select 
ACTIVATION.
3Confirm with OK.
4Enter the four-digit PIN code.
5Confirm with OK.
6Use [ to select whether you would like to turn the
function on or off.
7Confirm with OK.
Printing Out Fax Transmissions
1Press OK, 27 and OK.
2Using [ select 
PRINT.
3Confirm with OK.
4Enter the four-digit PIN code.
5Confirm with OK. The stored fax transmissions are
printed out and deleted from the memory.
Polling FaxesFax PollingWith the fax polling function, you can retrieve faxes that
lie ready in the dialled fax machine. You can also provide
documents on your machine to be polled by others.
Polling Faxes Directly
1Press OK, 22 and OK.
2Enter the desired number using the numeric keypad or
select a saved entry.
3Press o.
Time-Deferred Polling
1Press OK, 22 and OK.
2Enter the desired number using the numeric keypad or
select a saved entry.
3Confirm with OK.
4Enter the time, at which the document should be
polled, e.g. 14 00 for 2 pm.
5Confirm with OK.
6The device is now in standby mode. You can continue
to carry on telephone conversations or send other fax
transmissions during this time.
Jobs
Polling Send of Faxes
1Insert the document.
2Press OK, 23 and OK.
3Using [ select 
SIMPLE or MULTIPLE. With the
setting SIMPLE, the document can be polled only
once.  If you select MULTIPLE, the document can be
freely polled any number of times.
4Confirm with OK.
5Using [, select the desired contrast.
6Confirm with OK. After a short warm up phase, the
device will store the document in the fax memory.
Jobs
JobsHelp 6 · Jobs
Introduction
All messages that have just been sent, that have been pre-
pared for polling or that are to be sent at a later time are
present on in the jobs list.
DisplayJobs appear in the display one-at-a-time. After the job
number and job status indicator, you will find the fax
number to which a fax is to be sent or from which it is to
be polled. Documents on the jobs list can fall into the fol-
lowing categories with regard to their status:
Jobs 1TX—Time-Deferred SendingJobs 2DOC—Polling sendJobs 3POL—Time-delayed Fax Polling I f t h e m es s ag e  mem ory  is  f ull,  no ad dit io nal m es s ag e s
can be received.
If you have already saved a code, the device will
ask you to provide the old code first before you
can enter a new code.
Note down your PIN code in a safe place. Should
you forget the PIN code, the device must be reset
to factory settings, in order to be able to access it
again. All personal settings will be deleted.
To cancel a scheduled fax transmission, simply delete
the document from the jobs list (also see chapter
Jobs, page 15).
To cancel a scheduled fax transmission, simply delete
the document from the jobs list (also see chapter
Jobs, page 15).
You can also obtain a print-out of the jobs list by
pressing ¨, 6 and OK.
Downloaded From ManualsPrinter.com Manuals 
						

							16Philips LPF 920 · 925 · 935 · 940
EN
Jobs 4TR.—Job in progressJobs 5SMS—SMS transmission (function is not supported in all
countries and networks)
Stop
Immediate Job Execution
1Press OK, 51 and OK.
2Using [ select the job that you would like to execute
immediately.
3Confirm with OK. The transmission or polling will
commence immediately.
Changing a Job
1Press OK, 52 and OK.
2Using [ select the job that you would like to modify.
3Confirm with OK.
4Enter the desired changes and confirm by pressing OK.
Deleting a Job
1Press OK, 53 and OK.
2Using [ select the job that you would like to delete.
3Confirm with OK.
4Confirm the deletion with OK.
Printing a Job
1Press OK, 54 and OK.
2Using [ select the job that you would like to print
out.
3Confirm with OK.
Printing the Job ListPrinting the Job ListPress OK, 55 and OK. The device will print out a
list of all pending jobs.Press j to close the menu and return to the starting
mode.
Downloaded From ManualsPrinter.com Manuals 
						

							Copier17
EN
6Copier
Inserting DocumentsDocument FormatsUse documents with size A4 · 210¦×¦297 millimetres
with 60¦–¦90¦g/m2. Do not use any documents that are
smaller than A4. You can insert up to 20 documents at a
time.
1Insert the documents face down into the document
feeder. The lower most document will be fed in first.
You can insert up to 20 documents at a time.
2Push the document guide inwards, so that it lies level
on the documents.
3Set the desired resolution. You can choose between h/
FINE (for documents without special features), f/
SFINE (for documents with many details) and x/
PHOTO (for the highest resolution). Press fx. The
symbol of the selected resolution appears in the display.
Making a Copy
Press COPY twice. The copy is created.
Adjusting Copies
1Press COPY.
2Enter the number of times you would like to copy the
document (maximum of 99 copies).
3Confirm with OK.4Select the desired resolution using [. You have a
higher resolution available to you for copying than you
have for fax transmissions.
RESOL.:FAST—For documents without special fea-
tures
RESOL.:QUALITY—For documents with small print
or drawings
RESOL.:PHOTO—For the highest resolution
5Confirm with OK.
6You can make copies of the document that are enlarged
or that are compressed in size. Size compression is pos-
sible down to 25 percent of the size of the original, and
enlargements of up to 400 percent can be made.   Enter
the the desired value using the numeric keypad.
7Confirm with OK.
8Using [, select the desired contrast.
9Confirm with OK. The copy is created.
Press j to eject the documents without copying
them.
With function 16, you can select the default res-
olution setting (also see chapter Set Resolution,
page 27).
Downloaded From ManualsPrinter.com Manuals 
						

							18Philips LPF 920 · 925 · 935 · 940
EN
7SMS
Function is not supported in all countries and networks(Function is not supported in all countries and
networks)
SMS RequirementsCLIP for SMSYour device is preset for using the SMS (Short Messaging
Service) services. Caller Line Identification (CLIP) must be
activated for the SMS to work. It is possible that you will
not be able to send and receive SMS messages from a pri-
vate branch exchange (depending on the country and net-
work).
SMS with secret number
SMS Requirements
Sending SMS
1Press _.
2Using [ select 
SEND SMS.
3Confirm with OK.
4Enter the text using the keys (A—Z). You can enter
160 characters.
5Press _.
6Enter the desired number using the numeric keypad or
select a saved entry.
7Press _. The message is sent.
Sending to Multiple Recipients (= Broad-
casting)
1Press _.
2Using [ select 
SEND SMS.
3Confirm with OK.
4Enter the text as described under Sending SMS.
5Press _.6Enter the desired number using the numeric keypad or
select a saved entry.
7Press À.
8Enter the next telephone numbers. Between the indi-
vidual recipients, press À. You can enter up to 10 re-
cipients.
9Press _. The message is sent.
Direct Inward Dialling or Selecting Sub-
address
1Press _.
2Using [ select 
SEND SMS.
3Confirm with OK.
4Enter the text as described under Sending SMS.
5Press _.
6Enter the desired number using the numeric keypad or
select a saved entry.
7Enter the direct-inward dialling number or sub address.
8Press _. The message is sent.
Receiving SMS MessagesReceiving SMS MessagesWhen you have received an SMS, the green light â/_
will shine on your device, and the _ symbol will appear
on the display. Received SMS messages are printed out au-
tomatically. If you have turned the automatic printing
function off, the SMS messages will be stored. Your device
can store up to 30 SMS messages. 
Reading SMS Messages
1Press _.
2Using [ select 
READ SMS.
3Confirm with OK.
4Using [ select the SMS that you would like to read.
Unread SMS messages are marked with a star *.
5Confirm with OK.
Printing SMS Messages
1Press _.
2Using [ select 
PRINT SMS.
3Confirm with OK. Should you face problems in sending SMS, the rea-
son for the same could be that you are using a secret
number or that the device is connected to an old
ISDN System.
Ask your telephone service provider...
... whether you must register for the SMS Service.
... to which mobile telephone service providers you
can send SMS
... which costs are applicable.
... which functions are available.
You can also call the function by pressing OK,
31 and OK.
Enter capital letters by pressing and holding ú
button. You can enter special characters using ½.
To insert special characters and symbols, press
;ü. Press ûü to insert language specific special
characters. Select with [. Confirm with OK.
You can move the cursor using [. Use C to de-
lete individual characters. Press COPY to print
the message before sending it.
You can also call the function by pressing OK,
31 and OK.
You can also call the function by pressing OK,
31 and OK.
You can also call the function by pressing OK,
32 and OK.
You can also call the function by pressing OK,
34 and OK.
Downloaded From ManualsPrinter.com Manuals 
						

							SMS19
EN
4Using [ select the SMS that you would like to print.
SELECTED—Using [ select the message that you
would like to print.
NEW—Prints all unread SMS messages
ALL—Prints all received SMS messages
5Confirm with OK.
Deleting SMS MessagesSMS Deletion IntroductionYour device can store up to 30 SMS messages.  If the mes-
sage memory is full, the device cannot receive any more
messages. Delete SMS messages to free up memory.
1Press OK, 33 and OK.
2Using [ to select the SMS message you would like to
delete.
SELECTED—Using [ select the SMS that you would
like to delete.
ALREADY READ—Deletes all read SMS messages
ALL—All SMS messages will be deleted.
3Confirm with OK.
Modifying the SettingsCursor Navigation 6
Changing Transmitting and Receiving 
Numbers
Numbers of the SMS CenterAll numbers that you need to send and receive SMSs are
stored in your device. In case you moved to another tele-
phone service provider, you must change these numbers.
You can also receive SMS messages through a second serv-
ice provider.
1Press OK, 36 and OK.
2Using [ select 
SMS CENTER 1.
3Confirm with OK.
4Using [ select 
SEND No.
5Confirm with OK.
6Enter the number for sending SMSs.
7Confirm with OK.
8Using [ select 
RECEIVE No.
9Confirm with OK.
10Enter the number for receiving SMSs.
11Confirm with OK.
Sending the Sender’s NameSending the Sender’s NameYou can set whether or not your name should be sent with
each SMS message—identifying you as the sender. You
can enter and save you name with the function 14 (also see
chapter Entering Your Telephone Number and Name,
page 26).1Press OK, 35 and OK.
2Using [ select 
SENDER NAME.
3Confirm with OK.
4Use [ to select whether you would like to turn the
function on or off.
5Confirm with OK.
Switching Notification Tone On/OffSwitching Notification Tone On/OffYou will hear a notification tone whenever an SMS mes-
sage has arrived. You have the option of turning this func-
tion off.
1Press OK, 35 and OK.
2Using [ select 
BEEP SMS.
3Confirm with OK.
4Use [ to select whether you would like to turn the
function on or off.
5Confirm with OK.
Switching Automatic Printing On/OffAutomatic PrintingYou can deactivate the automatic printing of SMS messag-
es.
1Press OK, 35 and OK.
2Using [ select 
AUTO PRINT.
3Confirm with OK.
4Use [ to select whether you would like to turn the
function on or off.
5Confirm with OK.
Sending Text2Fax(in countries and networks without SMS function)(in countries and networks without SMS func-
tion)
Text2FaxYou can enter text on your device and send as a fax trans-
mission to another device
1Press _.
2Enter the desired number using the numeric keypad or
select a saved entry.
3Enter the text using the letter keypad. You can enter a
maximum of 70 lines of 80 characters each—a total of
5.600 characters.
4Press _. The message is sent. You can move the cursor using [. Press C to return
to the previous menu level. Press j to close the
menu and return to the starting mode.
You can also receive SMS messages through a sec-
ond service provider. Select 
SMS CENTER 2.
Modify the number for receiving SMS as de-
scribed under step 10.
Enter capital letters by pressing and holding ú
button. You can enter special characters using ½.
You can enter a line break using Rø.
To insert special characters and symbols, press
;ü. Press ûü to insert language specific special
characters. Select with [. Confirm with OK.
You can move the cursor using [. Use C to de-
lete individual characters. Press COPY to print
the message before sending it.
Downloaded From ManualsPrinter.com Manuals 
						

							20Philips LPF 920 · 925 · 935 · 940
EN
8 Fun and Games
SudokuHelp 7 · Sudoku
Sudoku
Sudoku is a Japanese number puzzle. The game has 3 × 3
squares divided into 3 × 3 fields. Depending on the diffi-
culty level, lesser or more digits are already given at the be-
ginning of the game. The aim of the game is to fill digits
from 1 to 9 in the game field is such a way that each digit
appears only once in a row, a column and each of the nine
blocks. There is only one solution.
Last Solution Only
Printing a Game
1Press OK, 68 and OK.
2Using [ select 
NEW.
3Confirm with OK.
4Using [ select the difficulty level.
5Confirm with OK.
6Enter, how many copies of the Sudoku you would like
to print (maximum 9 copies).
7Confirm with OK.
8Using [ select if you would like to print the solution.
9Confirm with OK.
Printing the Last Game Again
1Press OK, 68 and OK.
2Using [ select 
LAST.
3Confirm with OK.
4Enter, how many copies of the Sudoku you would like
to print (maximum 9 copies).
5Confirm with OK.
6Using [ select if you would like to print the solution.
7Confirm with OK.
Printing the Solution
1Press OK, 68 and OK.
2Using [ select 
SOLUTION.
3Confirm with OK.
Sudoku for Every Day
You can have a new Sudoku automatically printed each
day.
1Press OK, 68 and OK.
2Using [ select 
AUTO.
3Confirm with OK.
4Using [ indicate whether you would like to turn
printing on or off.
5Confirm with OK.6Enter the time, e.g. 14 00 for 2 pm.
7Confirm with OK.
8Using [ select the difficulty level.
9Confirm with OK.
10Enter, how many copies of the Sudoku you would like
to print (maximum 9 copies).
11Confirm with OK.
12Using [ select if you would like to print the solution.
13Confirm with OK.
Sudoku for Every Day 2
You can also print a new Sudoku by pressing ¨, 7
and OK.
The solution of the last printed game is saved. The
solutions of earlier games are no longer available.
You can turn off the daily Sudoku print by selecting
the function as described above and by switching off
the automatic printing under point 4.
Downloaded From ManualsPrinter.com Manuals