Philips Hts9540 User Manual

19
Listen to music
1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 999).
2 Press  DOCK for iPod on the home theater 
remote control.
 » The pla

ylists are displayed on the TV.
3 Press the Navigation buttons  and OK to 
select and play tracks.
Watch video or view slideshows
Note
 •On iPod, enable the T V ON set ting. •On iPhone, select the T V Out option.
1 Dock your iPod or iPhone (see ‘Dock your  iPod or iPhone’ on page 999).
2 Switch the T V to the AV/ V I D E O  source...

20
5 Change settings
This section helps you to change the settings of 
your home theater. 
Caution
 •Most	of	the	set tings	are	already	configured	w
ith the best value for the home theater. 
Unless
	 you 	 have 	 a 	 specific 	 reason 	 to 	 change 	 a 	
s

et ting, it is best to leave it at the default value.
Access the setup menu
1 Press  ( Home ).
2 Select  [Setup], then press OK .
 »The setup men

u appears.
3 Select a setup menu, then press OK .
See the following sections for information 
about how...

21
5 Press OK	 to 	 confirm 	 your 	 choice.
Note
 •For set tings related to HDMI, the T V must be 
connected through HDMI.
 •Night mode is available for Dolby encoded 
DVD and Blu-ray discs (for models suppor t 
Blu-ray playback).
Set up surround sound 
automatically
When	you	set	up	the	home	theater	for	the	first	time
, the setup menu prompts you to calibrate 
your speakers for the best surround sound. If you 
move your speakers or change the layout of the 
room, calibrate the speakers again to continue...

22
•	[View Network Settings] : Displays 
the current network set tings.
•	[View Wireless Settings]  : Displays the 
current Wi-Fi set tings.
•	[Net TV User Location] : Selects the 
location for accessing Net T V content 
and ser vices.
•	[Clear Net TV Memory] : Clears Net 
T V memor y, delete the temporar y 
downloaded
	 files 	 (e.g., 	 cookies) 	 of 	 the 	
N

et T V browser.
5 Press  OK	 to 	 confirm 	 your 	 choice.
Set up EasyLink
1 Press  (Home ).
2 Select  [Setup], then press OK .
3 Select...

23
•	[Sleep Timer] : Sets a sleep timer to 
switch the home theater to standby 
af ter
	 a 	 specific 	 time.
5 Press OK	 to 	 confirm 	 your 	 choice. 	
Note
 •If your preferred disc language is not available, 
you can select [Other] from the list and enter 
the 4-digit language code which can be found 
at the back of this manual. 
 •If you select a language that is not available 
on a disc, the home theater uses the default 
language of the disc.
Change advanced settings
1 Press  ( Home ).
2 Select...

24
Update software from a USB
1 Check for the latest sof tware version on www.philips.com/suppor t.
•	Search for your model and click on 
‘software and drivers’.
2 Create a folder named ‘UPG’ in the root director y of your USB storage device.
3 Download the sof tware into the ‘\UPG’ folder of the USB storage device.
4 Unzip the sof tware in the ‘\UPG’ folder.
5 Connect the USB storage device to the home theater.
6 Press  (Home ) and select [Setup] .
7 Select [Advanced]  > [Software Update]  > 
[USB] .
8...

25
7 Product specifications
Note
 •Specification	and	design	are	subject	to	change	without notice.
Region code
The type plate on the back or bottom of the 
home theater shows which regions it suppor ts
 
Playback media
 • A

VCHD, BD-RE, BD-Video, DVD-Video, 
DVD+R /+RW, DVD -R /-RW, DVD+R /-R 
DL, CD-R /CD-RW, Audio CD, Video CD/
SVCD,
	 Picture 	 files, 	 MP3 	 media, 	 WMA 	
m

edia, DivX (Ultra)/DivX Plus HD media, 
USB storage device
File Format
 • A

udio: .mp3, .wma, .wav
 •V

ideo: .avi, .div x,...

26
Subwoofer
 •I

mpedance: 4 ohm
 •S

peaker drivers: 165 mm (6. 5”) woofer
 •F

requency response: 40 Hz-150 Hz
 •D

imensions ( WxHxD): 196 x 397 x 342 (mm)
 •W

eight: 6.4 kg
 •C

able leng th: 3 m
Speakers 
 • S

ystem: full range satellite
 •S

peaker impedance: 4 ohm (center),  
6 ohm (Front/Rear)
 • S

peaker drivers: 
•	Center : 2 x 2. 5” woofer + 1”  
soft-dome tweeter
•	Front /Rear : 2 x 2. 5” full range + 2. 5” 
woofer + 1” sof t-dome tweeter
 •F

requency response: 150 Hz-20 kHz
 • D...

27
Sound
No sound. •En
sure that the audio cables are connected 
and select the correct input source (for 
example, 
 SOURCE  / AUDIO SOURCE ) 
for the device you want to play.
No sound on HDMI connection.
 • Y

ou might not hear any sound if the 
connected device is not HDCP (High-
bandwidth Digital Content Protection) 
compliant or only DVI compatible. Use an 
analog or digital audio connection.
 • E

nsure that the [HDM I Audio]  is enabled.
No sound from TV program.
 • Con

nect an audio cable from...

28
Cannot see pictures from my iPod/iPhone on the TV. •C
onnect a yellow composite cable from the 
dock to the T V.
 • S

witch the T V to the AV/ V I D E O  source 
(corresponding to the yellow composite cable).
 • P

ress P L AY  on the iPod or iPhone to star t 
the slideshow.
The audio is interrupted when I play music from 
my iPod or iPhone in the docking station.
 • E

nsure that you have installed the latest 
firmware
	 on 	 your 	 iPod 	 or 	 iPhone. 	 For 	 more 	
i

nformation, refer to the...