Philips Hts9140 User Manual

19
Clear browsing history
Clear browsing histor y to remove passwords, cookies and browsing data from your home theater.
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Network] > [Clear Net TV Memor y], then press OK .
Play from radio
The home theater can store up to 40 radio stations.
1 Check that the FM antenna is connected.
2 Press RADIO.
 »“AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press  (Play).
3 Press the following but tons...

20
Note
 •Philips Dock for iPod/iPhone is sold separately. •You can charge your iPod/iPhone on the dock while the home theater is in iPod mode.
Dock your iPod or iPhone
1 Connect the dock to the home theater and connect the yellow composite cable from the dock to the T V. For more information, see the Quick Star t provided with the dock.
2 Switch on the iPod or iPhone and place it in the dock.
3 On the home theater remote control, press  (Home), then select [browse iPod] and press OK.
Listen to music
1...

21
6 Change settings
This section helps you to change the settings of your home theater. 
Caution
 •Most of the set tings are already configured with the best value for the home theater. Unless you have a specific reason to change a set ting, it is best to leave it at the default value.
Access the setup menu
1 Press  (Home).
2 Select [Setup], then press OK.
 »The setup menu appears.
3 Select a setup menu, then press OK.
See the following sections for information about how to change the set tings of your...

22
Set up network
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Network], then press OK.
4 Select and adjust the following set tings:
• [Network Installation] : Star ts wired (Ethernet) or wireless setup. Follow the instructions to set up the network connection.
• [View Network Settings] : Displays the current network set tings.
• [View Wireless Settings] : Displays the current Wi-Fi set tings.
• [Net TV User Location] : Selects the location for accessing Net T V content and ser vices.
•...

23
• [Auto Subtitle Shift] : Enables or disables shift subtitle. If enabled, it adjusts the subtitle position automatically to fit the T V screen.
• [Change Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘0000’ if you do not have a PIN or if you have forgot ten your PIN.
• [Display Panel] : Changes the brightness of the display panel.
• [Auto St andby] : Enables or disables auto standby. If enabled, the home theater switches to standby af ter 30 minutes of inactivity (for...

24
7 Update software
To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site.
Check software version
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Advanced] > [Version Info.], then press OK.
 »The software version is displayed.
Update software from the 
network
1 Prepare the internet connection (see ‘Connect to a computer network and the Internet’ on page 12).
2 Press  (Home) and select...

25
8  Product specifications
Note
 •Specification and design are subject to change without notice.
Region code
The type plate on the back or bottom of the home theater shows which regions it suppor ts
 
Playback media
 •AVCHD, BD-RE, BD-Video, DVD-Video, DVD+R /+RW, DVD -R /-RW, DVD+R /-R DL, CD-R /CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX (Ultra)-CD, USB storage device
File Format
 •Audio: .mp3, .wma, .wav
 •Video: .avi, .div x, .mk v, .wmv
 •Picture: .jpg, .gif, .png
 •Amplifier...

26
 •Front/Rear speakers: 
• Speaker impedence: 6 ohm
• Speaker drivers:  4 x 64 mm (2. 5”) full range
• Frequency response: 150 Hz-20 kHz
 •Dimensions ( WxHxD): 955 x 155 x 96 mm
 •Weight: 6.6 kg
Subwoofer
 •Impedance: 4 ohm
 •Speaker driver : 165 mm (6. 5”) woofer
 •Frequency response: 20 Hz-150 Hz
 •Dimensions (WxHxD):  196 x 397 x 342 (mm)
 •Weight: 6.03 kg
Wall Mount
 •Dimensions (WxHxD):  682 x 108 x 17 (mm)
 •Weight: 1.3 kg
Laser Specification
 •Laser Type : InGaN/AIGaN (BD),  InGaAIP (DVD),...

27
Sound
No sound. •Ensure that the audio cables are connected and select the correct input source (for example,  SOURCE / AUDIO SOURCE) for the device you want to play.
No sound on HDMI connection. •You might not hear any sound if the connected device is not HDCP (High-bandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection.
 •Ensure that the [HDM I Audio] is enabled.
No sound from TV program. •Connect an audio cable from the audio input on the...

28
The audio is interrupted when I play music from my iPod or iPhone in the docking station. •Ensure that you have installed the latest firmware on your iPod or iPhone. For more information, refer to the suppor t website of your iPod or iPhone.
My 3D video plays in 2D mode. •Ensure that your home theater is connected to your 3D T V through HDMI.
 •Ensure that your disc is a Blu-ray 3D disc.
 •Ensure that the [Blu-ray 3D video] set ting is turned on (see ‘Change video set tings’ on page 21).
I see black...