Philips Hts9140 User Manual

							19
Clear browsing history
Clear browsing histor y to remove passwords, cookies and browsing data from your home theater.
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Network] > [Clear Net TV Memor y], then press OK .
Play from radio
The home theater can store up to 40 radio stations.
1 Check that the FM antenna is connected.
2 Press RADIO.
 »“AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press  (Play).
3 Press the following but tons to control play:
ButtonAction
 / Selects a preset radio station.
Navigation buttons  (lef t /r ight)
Searches for a radio station.
Navigation buttons  (u p /d ow n)
Fine tunes a radio frequency.
Press and hold to erase the preset radio station.Press to stop the installation of radio stations.
 OPTIONS /  (Options)Manual: Press once to access program mode, and press again to store the radio station.Automatic: Press and hold for five seconds to reinstall radio stations.
RADIOToggles between stereo and mono sound.
Play multimedia content
Note
 •Before playing multimedia content from the computer, ensure that the home theater is connected to the computer network and the media ser ver sof tware is properly set up.
1 Press  (Home).
 »The home menu appears.
2 Select [browse PC], then press OK.
 »A content browser appears.
3 Select a file, then press OK.
4 Press the playback but tons to control play (see ‘Play a disc’ on page 15).
Browse  Net TV
With the home theater connected to the Internet, you can use Net TV to access videos, pictures, music, information, games and other online ser vices.
Note
 •Koninklijke Philips Electronics N.V. bears no responsibility for content provided by Net T V service providers.
(Net T V feature not available in China and Latin A mer ica)
Access  Net TV
1 Prepare the internet connection and set up the network (see ‘Connect to a computer network and the Internet’ on page 12).
2 Press  (Home).
 »The home menu appears.
3 Select [browse Net TV], then press OK.
 »The Net TV home page appears.
4 Press the Navigation buttons to navigate Net T V web pages or ser vices.
5 Press OK to view or select an item.
6 Press  BACK to return to the previous page, or press  (Home) to exit.
English
EN
 
						

							20
Note
 •Philips Dock for iPod/iPhone is sold separately. •You can charge your iPod/iPhone on the dock while the home theater is in iPod mode.
Dock your iPod or iPhone
1 Connect the dock to the home theater and connect the yellow composite cable from the dock to the T V. For more information, see the Quick Star t provided with the dock.
2 Switch on the iPod or iPhone and place it in the dock.
3 On the home theater remote control, press  (Home), then select [browse iPod] and press OK.
Listen to music
1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 20).
2 Press DOCK for iPod on the home theater remote control.
 »The playlists are displayed on the TV.
3 Press the Navigation buttons and OK to select and play tracks.
Watch video or view slideshows
Note
 •On iPod, enable the T V ON set ting. •On iPhone, select the T V Out option.
1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 20).
2 Switch the T V to the AV/ V I D E O source (corresponding to the yellow composite cable).
 »The TV screen goes blank.
3 Browse on the iPod or iPhone screen to select videos or photos.
4 Press  (Play) to play the video and photos.
 »The picture is displayed on the TV. 
Note
 •AM and digital radio are not suppor ted. •If no stereo signal is detected, you are prompted to install the radio stations again. •For the best reception, place the antenna away from the T V or other sources of radiation.
Change tuning grid
In some countries, you can switch the FM tuning grid between 50 kHz and 100 kHz. Changing the tuning grid erases all preset radio stations.
1 Press RADIO.
2 Press  (Stop).
3 Press and hold  (Play) to toggle between 100 kHz and 50 kHz frequency.
Play audio from TV or other 
devices
Press  SOURCE / AUDIO SOURCE repeatedly to select the audio output of the connected device. 
Play from an MP3 player
Connect and play audio files from an MP3 player or other external audio devices.
1 Connect the MP3 player to the home theater as described in the Quick star t guide. 
2 Press  SOURCE / AUDIO SOURCE repeatedly until ‘MP3 LINK’ appears on the display panel.
3 Press the but tons on the MP3 player to select and play audio files.
Play from an iPod or iPhone
By connecting and installing a Philips Dock for iPod/iPhone, you can use the home theater to play music, movies and photos from your iPod or iPhone.
EN
 
						

							21
6 Change settings
This section helps you to change the settings of your home theater. 
Caution
 •Most of the set tings are already configured with the best value for the home theater. Unless you have a specific reason to change a set ting, it is best to leave it at the default value.
Access the setup menu
1 Press  (Home).
2 Select [Setup], then press OK.
 »The setup menu appears.
3 Select a setup menu, then press OK.
See the following sections for information about how to change the set tings of your home theater.
4 Press  BACK to return to the previous menu, or press  to exit.
Note
 •You cannot change a set ting that is grayed out.
Change video settings
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [ Video], then press OK.
4 Select and adjust the following set tings:
• [TV Display]: Selects a picture display format to fit the T V screen.
• [HDMI Video]: Selects the HDMI video resolution.
• [HDMI Deep Color]: Displays colors with more shades and hues when the video content is recorded in Deep Color and the T V suppor ts this feature.
• [Component Video]: Selects the component video resolution. Copy-protected DVDs can display only 480p/576p or 480i/576i.
Use Philips EasyLink
The home theater suppor ts Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. 
Note
 •Philips does not guarantee 10 0% interoperability with all HDMI CEC devices.
1 Switch on the HDMI CEC operations on the T V and other connected devices. See the manual of the T V or other devices for details. 
2 Press  (Home).
3 Select [Setup], then press OK.
4 Select [EasyLink] > [EasyLink], then press OK.
5 Select [On], then press OK.
6 You can now enjoy the following Philips EasyLink controls. 
One-touch playWhen you play a disc, the T V automatically switches to the correct channel.
One-touch standbyWhen you press and hold  (Standby) on the remote control, the home theater and all the connected HDMI CEC devices (if they suppor t one-touch standby) switch to standby mode simultaneously.
System Audio ControlWhen you play a device that has its audio output routed to the home theater, the home theater switches to the corresponding audio source automatically.To use one-touch audio, enable this feature and follow the instructions on the T V to map the connected devices correctly to the audio input jacks of the home theater.
Audio Input MappingUpdates audio input mapping if there are new devices connected.
English
EN
 
						

							22
Set up network
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Network], then press OK.
4 Select and adjust the following set tings:
• [Network Installation] : Star ts wired (Ethernet) or wireless setup. Follow the instructions to set up the network connection.
• [View Network Settings] : Displays the current network set tings.
• [View Wireless Settings] : Displays the current Wi-Fi set tings.
• [Net TV User Location] : Selects the location for accessing Net T V content and ser vices.
• [Clear Net TV Memory] : Clears Net T V memor y, delete the temporar y downloaded files (e.g., cookies) of the Net T V browser.
5 Press OK to confirm your choice.
Note
 •Net T V feature not available in China and Latin America
Set up EasyLink
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [EasyLink], then press OK.
4 Select and adjust the following set tings: 
• [EasyLink] : Enables or disables EasyLink.
• [One Touch Play] : Enables or disables One Touch Play.
If enabled, you can use the remote control to star t disc play in the home theater and the T V switches automatically to the correct channel.
• [Blu-ray 3D video]: Selects the 3-dimensional video output when you play a 3D video on your home theater. The home theater must be connected to a 3D T V through HDMI.
• [Picture Settings]: Selects a predefined color setting.
5 Press OK to confirm your choice.
Note
 •The best set ting is automatically selected for the T V. If you change the set ting, ensure that the T V suppor ts the new set ting.  •For set tings related to HDMI, the T V must be connected through HDMI. •For set tings related to progressive or component video, the T V must be connected through Component Video.
Change audio settings
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Audio] , then press OK.
4 Select and adjust the following set tings:
• [Night Mode] : Selects quiet or full dynamic sound. Night mode decreases the volume of loud sounds and increases the volume of sof t sounds such as speech.
• [HDM I Audio] : Selects HDMI audio format or disables HDMI audio output for the T V.
• [Ambisound Setup] : Sets up Ambisound to give the best surround sound effect. Follow the instructions on the T V to complete the setup.
5 Press OK to confirm your choice.
Note
 •For set tings related to HDMI, the T V must be connected through HDMI. •Night mode is available for Dolby encoded DVD and Blu-ray discs (for models suppor t Blu-ray playback).
EN
 
						

							23
• [Auto Subtitle Shift] : Enables or disables shift subtitle. If enabled, it adjusts the subtitle position automatically to fit the T V screen.
• [Change Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘0000’ if you do not have a PIN or if you have forgot ten your PIN.
• [Display Panel] : Changes the brightness of the display panel.
• [Auto St andby] : Enables or disables auto standby. If enabled, the home theater switches to standby af ter 30 minutes of inactivity (for example, in pause or stop mode).
• [VCD PBC] : Displays or skips the content menu for VCD and SVCD discs.
• [Sleep Timer] : Sets a sleep timer to switch the home theater to standby af ter a specific time.
5 Press OK to confirm your choice. 
Note
 •If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual.  •If you select a language that is not available on a disc, the home theater uses the default language of the disc.
Change advanced settings
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Advanced], then press OK.
4 Select and adjust the following set tings:
• [BD-Live Security] : Restricts or allows access to BD-Live.
• [Software Update] : Selects to update sof tware from the network or from USB storage device.
• [One Touch Standby] : Enables or disables One Touch Standby.
If enabled, the home theater can be switched off to standby by a remote control from the T V or other connected HDMI CEC devices.• [System Audio Control] : Enables or disables System audio control.
If enabled, follow the instructions on the T V to map the connected devices correctly to the audio connectors of the home theater. The home theater switches automatically to the audio source of the connected device.• [Audio Input Mapping] : Updates audio input mapping if there are new devices connected. 
5 Press OK to confirm your choice. 
Note
 •The connected devices must be connected through HDMI and switched on.
Change preference settings
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Preference], then press OK.
4 Select and adjust the following set tings:
• [Menu language] : Selects the on-screen display menu language.
• [Audio] : Selects audio language for video.
• [Subtitle] : Selects subtitle language for video.
• [Disc Menu] : Selects menu language for video disc.
• [Parental Control] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘8’.
• [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode af ter 10 minutes of inactivity (for example, in pause or stop mode).
English
EN
 
						

							24
7 Update software
To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site.
Check software version
1 Press  (Home).
2 Select [Setup], then press OK.
3 Select [Advanced] > [Version Info.], then press OK.
 »The software version is displayed.
Update software from the 
network
1 Prepare the internet connection (see ‘Connect to a computer network and the Internet’ on page 12).
2 Press  (Home) and select [Setup].
3 Select [Advanced] > [Software Update] > [Network]. 
 »If an upgrade media is detected, you are prompted to star t or cancel the update. 
4 Follow the instruction on the T V to confirm the update.
 »When complete, the home theater automatically switches off and restar ts.
• If not, disconnect the power cord for a few seconds and then reconnect it.
Note
 •If the home theater is unable to connect to the Philips ser ver, press  (Home), select [Setup] > [Network] > [Network Installation] to set up the network.
• [Clear memory] : Clears local memor y, delete the BD-Live files that you previously downloaded. If using an USB storage device, the local storage folder i s ‘ B U DA’.
• [Di vX® VOD Code] : Displays the DivX VOD registration code for the home theater.
• [Version Info.] : Displays the sof tware version for the home theater.
• [Restore default settings] : Resets the home theater to the default set tings programmed at the factor y.
5 Press OK to confirm your choice.
Note
 •You cannot restrict internet access on commercial Blu-ray discs.  •Before you purchase DivX videos and play them on the home theater, register the home theater on w w w.div x.com using the DivX VOD code. •You cannot reset parental control set ting to its default value.
EN
 
						

							25
8  Product specifications
Note
 •Specification and design are subject to change without notice.
Region code
The type plate on the back or bottom of the home theater shows which regions it suppor ts
 
Playback media
 •AVCHD, BD-RE, BD-Video, DVD-Video, DVD+R /+RW, DVD -R /-RW, DVD+R /-R DL, CD-R /CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX (Ultra)-CD, USB storage device
File Format
 •Audio: .mp3, .wma, .wav
 •Video: .avi, .div x, .mk v, .wmv
 •Picture: .jpg, .gif, .png
 •Amplifier
 •Total output power : 500W RMS, 10% THD
 •Frequency response: 40 Hz-20 kHz / ±3dB
 •Signal-to-noise ratio:  > 65 dB (CCIR) / (A-weighted)
 •Input sensitivity:
• AUX: 1500 mV
• MP3 LINK: 750 mV
Count ry DVD   BD
Europe ,  
Unit ed Ki ngdom
Ko rea
 La tin Amer ica
 Aust ralia ,  
New Ze aland
 Russia , India
 China
AA
AA
CC
CC
Asia Pacific, Taiwan,
Update software from a USB
1  Check for the latest sof tware version on www.philips.com/suppor t.
• Search for your model and click on ‘software and drivers’.
2 Create a folder named ‘UPG’ in the root director y of your USB storage device.
3 Download the sof tware into the ‘\UPG’ folder of the USB storage device.
4 Unzip the sof tware in the ‘\UPG’ folder.
5 Connect the USB storage device to the home theater.
6 Press  (Home) and select [Setup].
7 Select [Advanced] > [Software Update] > [USB].
8 Follow the instructions on the T V to confirm the update.
 »When complete, the home theater automatically switches off and restar ts.
• If not, disconnect the power cord for a few seconds and then reconnect it.
Caution
 •Do not turn off the power or remove the USB storage device when the sof tware update is in progress because you might damage the home theater.
English
EN
 
						

							26
 •Front/Rear speakers: 
• Speaker impedence: 6 ohm
• Speaker drivers:  4 x 64 mm (2. 5”) full range
• Frequency response: 150 Hz-20 kHz
 •Dimensions ( WxHxD): 955 x 155 x 96 mm
 •Weight: 6.6 kg
Subwoofer
 •Impedance: 4 ohm
 •Speaker driver : 165 mm (6. 5”) woofer
 •Frequency response: 20 Hz-150 Hz
 •Dimensions (WxHxD):  196 x 397 x 342 (mm)
 •Weight: 6.03 kg
Wall Mount
 •Dimensions (WxHxD):  682 x 108 x 17 (mm)
 •Weight: 1.3 kg
Laser Specification
 •Laser Type : InGaN/AIGaN (BD),  InGaAIP (DVD), AIGaAs (CD)
 •Typical Waveleng th: 405 nm (BD),  660 nm (DVD), 783 nm (CD)
 •Output power (Max. ratings):  20 mW (BD), 130 mW (DVD),  160 mW (CD)
Video
 •Signal system: PAL / NTSC
 •Component video output: 480i/576i, 480p/576p, 720p, 1080i
 •HDMI output: 480i/576i, 480p/576p, 720p, 1080i, 1080p, 1080p24
Audio
 •S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSL I N K
 •Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
 •Constant bit rate:
• MP3: 112 kbps - 320 kbps
• WMA: 48 kbps - 192 kbps
Radio
• Tuning range: 
• Europe/China:  FM 87. 5-108 MHz (50 kHz)
• Asia Pacific/Russia/Latin America/India: FM 87. 5-108 MHz (50/100kHz)
• Signal-to-noise ratio: FM 55 dB
• Frequency response:  FM 60 Hz-12. 5 kHz / ±3dB
USB
 •Compatibility: Hi-Speed USB (2.0)
 •Class suppor t:  UMS (USB Mass Storage Class)
 •File system: NTFS, FAT16, FAT32
 •Maximum memor y suppor t: < 160GB
Main Unit
 •Power supply: 
• Europe/Russia/China/India:  2 20 -24 0 V, ~5 0 H z
• Asia Pacific/Latin America: 110-127V/220-240V;  ~50-60Hz switchable
 •Power consumption: 115 W
 •Standby power consumption: < 0.22 W
 •Center speaker:
• Speaker impedance: 4 ohm 
• Speaker driver :  2 x 64 mm (2. 5”) full range
• Frequency response: 150 Hz-20 kHz
EN
 
						

							27
Sound
No sound. •Ensure that the audio cables are connected and select the correct input source (for example,  SOURCE / AUDIO SOURCE) for the device you want to play.
No sound on HDMI connection. •You might not hear any sound if the connected device is not HDCP (High-bandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection.
 •Ensure that the [HDM I Audio] is enabled.
No sound from TV program. •Connect an audio cable from the audio input on the home theater to the audio output on the T V, then press  SOURCE / AUDIO SOURCE repeatedly to select the correct audio source.
Distorted sound or echo. •Ensure that the T V volume is muted or set to minimum if you are playing audio through the home theater.
Audio and video are not synchronized. •1) Press  SOUND SETTINGS /  (Sound options) . 2) Press the Navigation buttons (left/right) repeatedly until AUDIO SYNC is displayed, then press OK. 3) Press the Navigation buttons (up/down) to sync the audio with the video.
Play
Disc cannot be played.  •Clean the disc.
 •Ensure that the home theater suppor ts the disc (see ‘Product specifications’ on page 25).
 •Ensure that the home theater suppor ts the region code of the disc.
 •For DVD±RW or DVD±R , ensure that the disc is finalized. 
DivX video files cannot be played. •Ensure that the DivX file is encoded according to the ‘Home Theater Profile’ with the DivX encoder.
 •Ensure that the DivX video file is complete.
9 Troubleshooting
Warning
 •Risk of electric shock . Never remove the casing of the product. 
To keep the warranty valid, never tr y to repair the product yourself. 
If you have problems using this product, check the following points before you request ser vice. If you still have a problem, register your product and get suppor t at www.philips.com/welcome. 
If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Write the numbers here: 
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this home theater do not work. •Disconnect the home theater from the power outlet for a few minutes, then reconnect. 
Picture
No picture. •Ensure that the T V is switched to the correct source for the home theater.
No picture on HDMI connection. •Change the HDMI video set ting or wait for 15 seconds for auto recover.
 •Check if the HDMI cable is faulty. Replace with a new HDMI cable.
No picture on the Component (Y Pb Pr) connection. •If the HDMI video connection is set to [Auto] or [10 8 0 p/24Hz], there is no video output through the component connection. Change the HDMI video set ting or remove the HDMI connection.
No high-definition video signal on the TV. •Ensure that the disc contains high-definition video.
 •Ensure that the T V suppor ts high-definition video.
English
EN
 
						

							28
The audio is interrupted when I play music from my iPod or iPhone in the docking station. •Ensure that you have installed the latest firmware on your iPod or iPhone. For more information, refer to the suppor t website of your iPod or iPhone.
My 3D video plays in 2D mode. •Ensure that your home theater is connected to your 3D T V through HDMI.
 •Ensure that your disc is a Blu-ray 3D disc.
 •Ensure that the [Blu-ray 3D video] set ting is turned on (see ‘Change video set tings’ on page 21).
I see black video on my TV screen. •Ensure that your home theater is connected to the T V through HDMI.
 •Switch to the correct HDMI source on your T V.
Network
Wireless network not found or distorted. •Ensure that the wireless network is not disturbed by the microwave ovens, dect phones or other Wi-Fi devices in your neighbourhood.
 •Tr y the wired network installation if the wireless network does not work properly (see ‘Set up network ’ on page 22). 
DivX subtitles do not display correctly. •Ensure that the subtitle file name is the same as the movie file name.
 •Select the correct character set: 1) Press  OPTIONS /  (Options). 2) Select [Character Set]. 3) Select the suppor ted character set. 4) Press OK.
The contents of a USB storage device cannot be read. •Ensure that the format of the USB storage device is compatible with the home theater (see ‘Product specifications’ on page 25).
 •Ensure that the USB storage device is format ted with a file system that is suppor ted by the home theater.
‘No entry’ or ‘x’ sign appears on the TV. •The operation is not possible.
EasyLink feature does not work. •Ensure that the home theater is connected to a Philips brand EasyLink T V and that EasyLink is on.
I do not want my home theater to be switched on when I switch on my TV. •This is the correct behavior for Philips EasyLink (HDMI-CEC). To make the home theater work independently, switch off EasyLink.
I cannot access BD-Live features. •Check the network connection (see ‘Connect to a computer network and the Internet’ on page 12) or ensure that the network has been set up (see ‘Set up network ’ on page 12).
 •Clear memor y storage (see ‘Change advanced set tings’ on page 23).
 •Ensure that the Blu-ray disc suppor ts  BD-Live feature.
The video (movies, photos, video clips, etc.) contents of the iPod/iPhone do not display on TV. •Video and photo browsing is not suppor ted, you can only browse the video and photo contents on the iPod/iPhone itself.
Cannot see pictures from my iPod/iPhone on the T V. •Connect a yellow composite cable from the dock to the T V.
 •Switch the T V to the AV/ V I D E O source (corresponding to the yellow composite cable).
 •Press P L AY on the iPod or iPhone to star t the slideshow.
EN