Philips Hts8010s User Manual

							English
21
3139 115 2xxx1
Getting Started (continued)
TIPS:The underlined option is the factory default setting.
To return to the previous menu, press 1.  To remove the menu, press SETUP MENU.
7Select { Progressive } > { On }, then
press OK to confirm.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
ComponentOn
Off
8The below menu will appear on the TV.
HINTS:(refer to the owner's manual)
ACTIVATING PROGRESSIVE:
1. Ensure your TV has progressive scan.
2. Connect with YPbPr(GBR) video cable.
3. If there is a blank screen on normal TV,
    wait 15 seconds for auto recover.
CancelOK
9Press 1 to highlight OK in the menu
and press OK to confirm.
There will be no picture on your TV
at this state until you turn on the
progressive scan mode on your TV.
0Turn on your TV progressive scan mode
(refer to your TV user manual).
➜The below menu will appear on the TV.
Confirm again to use progressive scan
If picture is good press OK on remote
CancelOK
!Press 1 to highlight OK in the menu
and press OK to confirm.
➜The set up is complete now and you
can start enjoy the high quality picture.If no picture:

Wait for 15 seconds for the auto recovery.
OR
1Deactivate Progressive Scan feature by
pressing the EJECT on the DVD system.
2Press 1 on the remote.
3Press SUBTITLE on the remote.
➜The blue DVD background screen will
appear on the TV.
Helpful Hint:
– There are some progressive scan TV and
High-Definition TV sets that are not fully
compatible with this DVD system, resulting in
the unnatural picture when playing back a
DVD VIDEO disc in the progressive scan
mode.  In such a case, turn off the
progressive scan feature on both the DVD
system and your TV set.
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM21
 
						

							22
3139 115 2xxx1
English
Getting Started (continued)
Selecting the matching colour
system
The colour system of the DVD system,
DVD and TV should match. Only then will
it be possible to play a DVD on this
system.  Before changing the TV system,
determine the colour system of your TV.
1In disc mode, press SETUP MENU.
2Press 2 repeatedly to select { Video Setup
Page }.
3Use 34 keys to highlight { TV Type },
then press 2.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
ComponentPAL
NTSC
Multi
4Use 34 keys to highlight one of the
options below:
{ 
PAL }Select this if the connected TV has the PAL
colour system. It will change the video signal of
an NTSC disc and output it to PAL format.
{ NTSC }Select this if the connected TV has the NTSC
colour system. It will change the video signal of
a PAL disc and output it to NTSC format.
{ Multi }Select this if the connected TV is compatible
with both NTSC and PAL (multi-system).
The output format will be in accordance with
the video signal of the disc.
5Select a setting and press OK.
➜Follow the instructions shown on the
TV to confirm the selection (if any).
➜If a blank/distorted TV screen appears,
wait for 15 seconds for the auto
recovery.Setting the TV Display
Set the aspect ratio of the DVD system
according to the TV you have connected.
The format you select must be available
on the disc.  If it is not, the setting for TV
display will not affect the picture during
playback.
1In disc mode, press SETUP MENU.
2Press 2 repeatedly to select { Video Setup
Page }.
3Use 34 keys to highlight { TV Display },
then press 2.
 
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
Component4:3 Pan Scan
4:3 Letter Box
16:9 Wide Screen
4Use 34 keys sto highlight one of the
options below:
{ 
4:3 Pan Scan }Select this if you have a
conventional TV and want
both sides of the picture to be trimmed or
formatted to fit your TV screen.
{ 4:3 Letter Box }Select this if you have a
conventional TV.  In this case, a
wide picture with black bands on the upper
and lower portions of the TV screen will be
displayed.
{ 16:9 Wide  Screen }Select this if you have a wide-
screen TV.
5Select a setting and press OK.
TIPS:The underlined option is the factory default setting.
To return to the previous menu, press 1.  To remove the menu, press SETUP MENU.
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM22
 
						

							English
23
3139 115 2xxx1
Getting Started (continued)
Step 4: Setting language
preferences
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc.  If the
language selected is not available on the
disc, the disc’s default language will be
used instead.
The OSD (On-Screen Display) language
for the system menu will remain as you
set it, regardless of the default and
optional disc languages.
On-screen display (OSD) language
1In disc mode, press SETUP MENU.
2Press 2 to select { General Setup Page }.
3Use 34 keys to highlight { OSD
Language }, then press 2.
General Setup Page
Disc Lock
Program
OSD Language
Screen Saver
DivX(R) VOD CodeEnglish
Espanõl
Français
Português
4Use 34 keys to select a language and
press OK to confirm.Audio, Subtitle and Disc menu
languages
1Press Ç twice to stop playback (if any),
then press SETUP MENU.
2Press 2 repeatedly to select
{ Preference Page }.
3Use 34 keys to highlight one of the
options below, then press 2.
–{ Audio } (disc’s soundtrack)
–{ Subtitle } (disc’s subtitles)
–{ Disc Menu } (disc’s menu)
Preference PageAudioSubtitleDisc MenuParentalPBCMP3/JPEG NavPasswordDivX SubtitleDefault
EnglishEspanõlFrançaisPortuguêsSuomi
4Use 34 keys to select a language and
press OK to confirm.
If the language you want is not in
the list, then select { Others }.
Use the numeric keypad (0-9) on the
remote to enter the 4-digit language code
‘XXXX’ (see page 5) and press OK to
confirm.
5Repeat steps 3~4 for other settings.
TIPS:The underlined option is the factory default setting.
To return to the previous menu, press 1.  To remove the menu, press SETUP MENU.
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM23
 
						

							24
3139 115 2xxx1
English
Disc Operations
IMPORTANT!
–If the inhibit icon (ø or X) appears
on the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
–DVD discs and players are designed
with regional restrictions. Before
playing a disc, make sure the disc is
for the same zone as your player.
–Do not put any objects other than
discs on the disc slot.  Doing so may
cause the disc player to malfunction.
Playable discs
SUPER VIDEO
Your DVD home theatre system will
play:
–Digital Versatile Discs (DVDs)
–Video CDs (VCDs)
–Super Video CDs (SVCDs)
–Super Audio CDs (SACDs)
–Finalised DVD+Recordable[Rewritable]
(DVD+R[W])
–Audio Compact Discs (CDs)
–MP3 discs, picture (Kodak, JPEG) files
on CD-R(W).
–JPEG/ISO 9660/UDF format
–JPEG resolution support up to
3072 x 2048
–Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz
–Supported Bit-rates : 32~256 (kbps),
variable bit rates
–MPEG-4 files on CD-R[W]:
–Simple profile
–Advanced simple profile (640-480)
–DivX disc on CD-R[W]/DVD+R[W]:
–DivX 3.11, 4.x and 5.x
–GMC (Global Motion Compensation)
and QP (Quarter Pixel) not supported.
Region Codes
The regional code ‘X’ (denotes the
number) of this device is shown at
the back panel of this device.  If
the DVD is marked with a
different region code, it cannot be played
on this device.
Helpful Hints:
– It may not be possible to play CD-R/RW or
DVD-R/RW in all cases due to the type of
disc or condition of the recording.
– If you are having trouble playing a certain
disc , remove the disc and try a different one.
Improperly formatted discs will not play on
this DVD system.
TIPS:Some discs cannot be played on this DVD system due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
ALL
X
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM24
 
						

							English
25
3139 115 2xxx1
Playing a disc
1
Press SOURCE button until “DISC”
appears on the display panel.
2Turn on the TV power and set to the
correct Video In channel.  (See page 20
“Setting the TV”).
➜You should see the blue DVD
background screen on the TV.
3Insert a disc into the disc slot.
➜Make sure the disc label is facing out.
For double-sided discs, load the side you
want to play facing out.
➜When loading an 8cm disc, slot into
the middle of the disc loader.
EJECT
4Playback will start automatically.
➜If a disc menu shows on the TV, see
page 26 “Using the Disc Menu”.
➜If the disc is locked by parental control,
you must enter your six-digit password.
(see pages 37~38).
5To remove the disc, press EJECT (or hold
down the Ç button on the remote).
Auto Eco Power standby mode
This is a power-saving feature, the system
will automatically switch to Eco Power
standby mode if you do not press any
buttons within 30 minutes after a disc has
stopped playing.
Disc Operations (continued)
Basic playback controls
Pausing playback

During playback, press 2;
(PLAY PAUSE).
➜To resume normal playback, press the
same button again.
Selecting another track/chapter

Press S / T (PREV / NEXT) or
use the numeric keypad (0-9) to key in
a track/chapter number.
➜If repeat track mode is active, pressing
S / Twill replay the same track/
chapter.
Searching backward/forward

Press and hold S / T (PREV /
NEXT).
➜While searching, pressing S / T
again will decrease/increase the search
speed.
➜To resume normal playback, press 2;
(PLAY PAUSE).
Stopping playback

Press Ç (STOP).
TIPS:The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM25
 
						

							26
3139 115 2xxx1
English
Disc Operations (continued)
Selecting various repeat/
shuffle functions

While playing a disc, press REPEAT on
the remote repeatedly to choose a repeat
play mode.
DVD
™RPT ONE (repeat chapter)
™RPT  TT (repeat title)
™SHUFFLE (random play)
™RPT SHF (repeat random play)
™RPT OFF (exit repeat mode)
VCD/SVCD/CD
™RPT ONE (repeat track)
™RPT ALL (repeat disc)
™SHUFFLE (random play)
™RPT SHF (repeat random play)
™RPT OFF (exit repeat mode)
MP3/SACD/DivX
™RPT ONE (repeat track)
™RPT ALL/FLD (repeat folder)
™SHUFFLE (random play)
™RPT OFF (exit repeat mode)
Helpful Hint:
– VCDs do not allow repeat playback as
long as the PBC mode is switched on.
Other operations for video
playback (DVD/VCD/SVCD)
DISPLAY SUBTITLE
SETUP 
MENUDISC
MENU ZOOM
AUDIO
OK
SUBWOOFER
Using the Disc Menu
A menu may appear on the TV screen
once you load in the disc, depending on
the disc format.
To select a playback feature or item

Use 1 2 3 4 keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
To access or remove the menu

Press DISC MENU on the remote.
TIPS:The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM26
 
						

							English
27
3139 115 2xxx1
Disc Operations (continued)
Viewing playback information
It will show the disc playback information
(for example, title or chapter number,
elapsed playing time, audio/subtitle
language), a number of operations can be
done without interrupting disc playback.
1During playback, press DISPLAY.
➜A list of available disc information
appears on the TV screen.
Menu
Title Elapsed Subtitle  Audio
Off
Repeat
Off
Total Elapsed
Total Elapsed
Menu
2Use 34 keys to view the information and
press OK to access.
3Use the numeric keypad (0-9) to input
the number/time or use 34 keys to make
the selection, then press OK to confirm.
➜Playback will change to the chosen
time or to the selected title/chapter/
track.Resuming playback from the last
stopped point
This DVD system able to resume disc
playback from its last stopped point (only
possible for the last 10 discs that
recorded without a menu).
1Load one of the last played 10 discs.
2While “LOADING” appears on the display
panel, press 2; (PLAY PAUSE) to start
playback from the last stop point.
To cancel the resume mode

In stop mode, press Ç(STOP) again.
Zooming in
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
1During playback, press ZOOM
repeatedly to select a different zoom
factor.
➜Use 1 2 3 4 keys to move through
the zoomed image.
➜Playback will continue.
2Press ZOOM repeatedly to return to
the original size.
TIPS:The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM27
 
						

							28
3139 115 2xxx1
EnglishChanging sound track language
This operation works only on DVDs with
multiple soundtrack languages, you can
change the language you want while
playing a DVD.

Press AUDIO repeatedly to select the
available audio languages.
For VCD - changing the audio
channel

Press AUDIO repeatedly to select the
available audio channels provided by the
disc (STEREO, MONO LEFT, MONO
RIGHT or MIX MONO).
Changing subtitle language (DVD
only)
This operation works only on DVDs with
multiple subtitle languages, you can
change the language you want while
playing a DVD.

Press SUBTITLE repeatedly to select
different subtitle languages.
Disc Operations (continued)
TIPS:The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
Playback Control (PBC) (VCD only)
PBC playback allows you to play Video
CDs interactively, following the menu on
the display.  This function can also be
accessed via the ‘Preference Page’ menu
(see page 38).
For VCDs with Playback Control
(PBC) feature (version 2.0 only)

When play is stopped, press DISC
MENU to toggle between ‘PBC ON’ and
‘PBC OFF’.
➜If you select ‘PBC ON’, the disc menu
(if available) will appear on the TV.
Use 3 4 keys or numeric keypad (0-9) to
select a play option and press OK to
confirm.
➜If you select ‘PBC OFF’, the VCD will
skip the index menu and playback directly
from the beginning.
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM28
 
						

							English
29
3139 115 2xxx1
Disc Operations (continued)
Playing an MP3/JPEG/MPEG-4
disc
This DVD system can playback MPEG-4,
MP3, JPEG, VCD & SVCD files on a
personally recorded CD-R/RW disc or
commercial CD.
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel.  (See page
20 “Setting the TV”).
1Insert a disc.
➜The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜The disc menu appears on the TV
screen.
00:19      04:39           001/003
\MP3_files_128kbs
PreviousPicture 1
Picture 2
MP3 Music 1
MP3 Music 2
050       003   000 
2If the disc main menu contains various
folders, use 34 keys to select a desired
folder and press OK to open the folder.
3Use 3 4 keys to select a track/file and
press OK to start playback.
➜Playback will start from the selected
file and continue to the end of the folder.
During playback, you can;

Press S / T to select another
track/file in the current folder.

Press and hold S / T to fast
reverse/forward search a music track.

To select another folder from the current
disc, press 3 to return to the root menu,
then use 34 keys to make your selection
and press OK to confirm.
Press REPEAT continuously to access
various play mode.

Press 2; (PLAY PAUSE) to interrupt
playback and press the same button again
to resume playback.
Playing MP3 music and JPEG
picture simultaneously
1Insert an MP3 disc that contains music
and pictures.
➜The disc menu appears on the TV
screen.
2Select an MP3 track and press 2; (PLAY
PAUSE) to start playback.
3During MP3 music playback, use 1 2 3 4
keys to select a picture folder from the
disc menu and press 2; (PLAY PAUSE).
➜The picture files will be played back
until the end of the folder.
4To quit simultaneous playback, press
DISC MENU and followed by
Ç(STOP).
Helpful Hints:
– It may not be possible to play cer tain
MP3/JPEG/DivX/MPEG-4 disc due to the
configuration and characteristics of the disc
or condition of the recording.
– It is normal to experience an occasional
“skip” while listening to your MP3 disc .
– It is normal to experience an occasional
pixelation during MPEG-4/DivX playback
due to poor clarity of digital contents during
internet downloading.
– For multi-session discs with different
formats, only the first session will be available.
TIPS:Some discs cannot be played on this DVD system due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM29
 
						

							30
3139 115 2xxx1
English
Disc Operations (continued)
Playing a picture disc (slide
show)
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel.  (See page
20 “Setting the TV”).

Insert a Picture disc (Kodak Picture CD,
JPEG).
➜For a Kodak disc, the slide show will
begin automatically.
➜For a JPEG disc, the picture menu will
appear on the TV screen.  Press 2;
(PLAY PAUSE) to start the slide-show
playback.
Preview Function
This function shows the content of the
current folder or the whole disc.
1During playback, press Ç(STOP).
➜12 thumbnail pictures will appear on
the TV  screen.
2   S T
2Press S / T to display the other
pictures on the previous/next page.
3Use 1 2 3 4 keys to highlight one of the
picture and press OK to start playback.
4Press DISC MENU to return to Picture
CD menu.Zoom picture
1During playback, press ZOOM
repeatedly to select different zoom
factor.
2Use 1 2 3 4 keys to move through the
zoomed image.
Rotating/Flipping the picture

During playback, use 1 2 3 4 keys to
rotate/flip the picture on the TV screen.
3
 : flip the picture vertically
4
 : flip the picture horizontally
1
 : rotate the picture anti-clockwise
2
 : rotate the picture clockwise
Supported JPEG picture formats
File format:
–The file extension has to be *.JPG and
not *.JPEG.
–It can only display DCF-standard still
pictures or JPEG pictures e.g. TIFF.  It
cannot play back moving pictures, Motion
JPEG, progressive JPEG and other
formats, or pictures in formats other than
JPEG, or pictures associated with sound.
–It may require longer time for the
DVD system to display the disc content
on the TV due to the large number of
songs/pictures compiled into one disc.
TIPS:Some discs cannot be played on this DVD system due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
001-049 HTS8000S-00-Eng 22/04/2005, 04:06 PM30