Philips Hts8010s User Manual

							English
11
3139 115 2xxx1
red label
white label
SPEAKERSFRONT 
RIGHT
FRONT 
LEFT
TO
 JUN
CT
IO
N BO
X
AC MAINS
VIDEO
AUDIOOUT IN
Extend the FM antenna and
place its end on the wall where 
the reception is best
To AC power outletTo AC power outlet
Example of TV back panel
To  T V
FRONT L FRONT R
To disconnect the cable, 
press down the catch 
and pull out. Ensure this portion is fully 
inserted into the socket
Overall Connection Overview
IMPORTANT!
If you wish to mount the main DVD
system and the SonoWave speakers on
the wall, see next page before you make
any connections.
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM11
 
						

							12
3139 115 2xxx1
EnglishMounting the main DVD
system on the wall
Optional Setup
You can choose to wall mount the main
DVD system on the wall.  Select a
position where nothing obstructs the
disc slot on its right hand side.
CAUTION!
You should get a qualified person to
attach the brackets to the wall.  DO
NOT do it by yourself in order to
avoid unexpected damage to the
equipment or injury to personnel.
Helpful Hint:
– Philips accepts absolutely no liability for
any accidents or damage resulting from
inadequate assembly or mounting, misuse or
abuse, or natural disasters.1Remove the back cover from the main
DVD system.
2Press on the catch at the centre while
detaching the main DVD system from its
stand.
3Hold the supplied bracket (white colour)
in position and mark holes on the wall for
the screws. Drill holes (around 6.5mm
diametre) and insert the rubber wall
plugs (green colour) into the holes.
4Use the supplied screws to secure the
bracket onto the wall.
5Hook the main DVD system firmly onto
the mounted bracket by sliding through
the bracket to lock into position.
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM12
 
						

							English
13
3139 115 2xxx1
You can choose to hang the SonoWave
speakers on the wall.  It should be
positioned at the normal listening ear
level, at the same height and equal
distance from the TV.
CAUTION!
You should get a qualified person to
attach the brackets to the wall.  DO
NOT do it by yourself in order to
avoid unexpected damage to the
equipment or injury to personnel.
Helpful Hint:
– Philips accepts absolutely no liability for
any accidents or damage resulting from
inadequate assembly or mounting, misuse or
abuse, or natural disasters.
Mounting the SonoWave
speakers on the wall
1
Remove the base of the SonoWave
speakers by loosening the two screws at
the bottom.
2Rotate the stand at 180 degrees and
tighten the screws.
3Hold the supplied bracket (black colour)
in position and mark holes on the wall for
the screws. Drill holes (around 6.5mm
diametre) and insert the rubber wall
plugs (green colour) into the holes.
4Use the supplied screws to secure the
bracket onto the wall.
5Hook the SonoWave speakers onto the
mounted brackets by sliding through the
bracket to lock into position.
Optional Setup (continued)
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM13
 
						

							14
3139 115 2xxx1
English
Optional Connections (continued)
IMPORTANT!
–The progressive scan video quality
is only possible when using Y Pb Pr
and a progressive scan TV is required.
–DO NOT connect both SCART
and Y Pb Pr to a TV, it may affect the
picture quality.
1Use the component video cables (red /
blue / green - not supplied) to connect the
Junction Box’s Y Pb Pr sockets to the
corresponding component video input
sockets (or labelled as Y Pb/Cb Pr /Cr or
YUV) on the TV.

Do not connect the SCART from
Junction Box to your TV.
2To hear the TV channels through this
DVD system, use an audio cables (white /
red - not supplied) to connect AUX IN
sockets to the corresponding AUDIO
OUT sockets on the TV.
3Proceed to pages 20~21 for detailed
Progressive Scan set up.
Connecting to a Progressive
Scan TV
If the FM reception is poor, you can use
an FM coaxial cable (not supplied) to
connect the FM 75Ω coaxial cable hidden
inside the back cover directly to the
outdoor FM antenna terminal.
1Open the main DVD system’s back cover
by lifting up the cover from the bottom.
2Unplug the FM pigtail antenna from the
FM 75Ω coaxial cable.
3Connect the FM 75Ω coaxial cable to
one end of the FM coaxial cable which is
connected to the outdoor FM antenna
terminal.
Helpful Hint:
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
DIGITAL IN L   AUX IN   R COMPONENT VIDEOPr Pb Y
TO SUB-
WOOFER
VIDEO
AUDIOOUT INTV
Junction box
Connecting to outdoor FM
antenna terminal
FM Antenna
3
2
1
1
2
FM pigtail
cable
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM14
 
						

							English
15
3139 115 2xxx1
You can connect an analogue audio/video
device (e.g. VCR, Cable/Satellite Box, TV
or cassette recorder) to the Junction Box
in order to use the Home Theatre Audio
System’s surround sound capabilities.

Connect the Junction Box’s AUX IN
(R/L) sockets to the AUDIO OUT
sockets on an analogue audio/video
device.
To listen to the sound, press SOURCE
repeatedly to select “AUX” as the source
to play.
Helpful Hints:
– Recording from this DVD system to your
VCR is not possible.
– To see the picture of the connected video
device (e.g. VCR), connect the VIDEO OUT
socket of the device to the VIDEO IN socket
of the TV, and select the correct input
channel on the TV.
Optional Connections (continued)
Connecting to an analogue
audio/video deviceConnecting to a digital audio
device
You can connect a digital audio device
(e.g. CD recorder) to the Junction Box in
order to use the Home Theatre Audio
System’s surround sound capabilities.

Connect the Junction Box’s DIGITAL
IN socket to the DIGITAL OUT socket
on a digital audio device.
To listen to the sound, press SOURCE
repeatedly to select “DI” as the source
to play.
Helpful Hints:
– You cannot hear or record the SACD or
MP3-CD playback if you use the digital
connection.
– For your playback through DIGITAL IN
connection, set the digital output of that
player to PCM format.
– Always refer to the user manual of the
other equipment for complete connection
and usage details.
DIGITAL IN L   AUX IN   R COMPONENT VIDEOPr Pb YTO SUB-
WOOFER
AUDIO OUTRL
Junction box
DIGITAL IN L   AUX IN   R COMPONENT VIDEOPr Pb YTO SUB-
WOOFER
Junction box
VCR, Cable/Satellite
Box, TV or cassette
recorderGames Console,
CD Recorder
(for example)
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM15
 
						

							16
3139 115 2xxx1
English
Remote Control
1B
–Switches to Eco Power standby mode.
–In TV mode, hold down this button to
switch Philips TV off/on.
2 SOURCE indicator
–Indicates the active source.
3SOURCE ON
–Selects the relevant active source mode:
DISC, TUNER  FM, TV  or AUX/DI.
SUBWOOFER
1
3
4
2
5
6
7
8
9
0
!
@
#
4ZOOM
–DISC: enlarges a picture on the TV screen.
5AUDIO
–DISC: selects an audio language (DVD/
VCD) or an audio channel (CD).
–TUNER: toggles between stereo and
mono mode.
6SUBWOOFER
–Activates the AV subwoofer setting, then
use the VOL +- on the remote to
adjust the output level.
7SONOWAVE
–Activates the SonoWave Speakers
settings.  Refer to page 42 for detailed
adjustment.
8DISC MENU
–DISC: enters or exits disc contents menu.
–For VCD version 2.0 only;
In stop mode, turns on/off playback
control (PBC) mode.
During playback, returns to main menu.
91 2 3 4
–DISC: selects movement direction in the
menu.
–TUNER: use 3 4 to start auto tuning.
–TUNER: use 1 2 to select a preset radio
station.
0Ç
–Exits an operation.
–DISC: stops playback.  Hold down this
button to eject the disc.
–TUNER: hold down this button to erase
the current preset radio station.
!OK
–Confirms a selection.
–Hold down this button to set the sleep
timer function.
@TV VOL +-
–Adjusts TV volume (Philips TV only).
#REPEAT
–DISC: selects various repeat modes;
switches repeat mode off.
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM16
 
						

							English
17
3139 115 2xxx1
Remote Control (continued)
$MUTE
–Mutes or restores the volume.
%SUBTITLE
–DISC: selects a subtitle language.
^DISPLAY
–Hold down this button to change the
brightness of the display panel.
–DISC: displays the current status or disc
information.
&SOUND
–Selects a sound effect.
–Hold down this button to turn on/off
night mode (optimise the dynamic of the
sound output).
*SURR
–Selects multichannel surround or stereo
mode.
(SETUP MENU
–DISC: enters or exits system setup menu.
)ÉÅ
–DISC: starts/pauses playback.
–TUNER: starts storing radio stations in
Plug & Play mode.
¡VOL +-
–Adjusts the volume level.
™S  /  T
–DISC: select a track or hold down this
button to search backward/forward.
–TV: selects previous/next channel (Philips
TV only).
–TUNER: tunes the radio frequency up/
down.
£Numeric Keypad (0-9)
–DISC: enters a track/title number.
–TUNER: enters the preset radio station
number.
≤PROGRAM
–DISC: starts programming.
–TUNER: starts *automatic/ manual preset
programming.
SUBWOOFER SONOWAVE^
%
$
&
*
(
)
¡
≤
™
£
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM17
 
						

							18
3139 115 2xxx1
English
Main Unit
1 ECO POWER indicator
–Lights up when in Eco Power standby
mode.
2STANDBY ON B
–Switches to Eco Power standby mode, or
turns on the system.
3SOURCE
–Selects the relevant active source mode:
DISC, TUNER  FM, TV  or AUX/DI.
4SURROUND
–Selects multichannel surround or stereo
mode.
5PREV / NEXT
–DISC: select a track or hold down this
button to search backward/forward.
–TUNER: tunes the radio frequency up/
down.
23487659
0!
1
6PLAY PAUSE
–DISC: starts/pauses playback.
–TUNER: starts preset radio station
installation in Plug & Play mode.
7STOP
–Exits an operation.
–DISC: stops playback.
–TUNER: hold down this button to erase
the current preset radio station.
8EJECT
–DISC: ejects the disc.
9VOLUME
–Adjusts the volume level.
0Disc slot
!System display panel
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM18
 
						

							English
19
3139 115 2xxx1
Getting Started
Step 1: Preparing the remote
control
Before you start using the remote
control, pull out the plastic protective
sheet.
To change the battery

Pull out the battery compartment and
replace with the battery type LITHIUM
CR2025.
CAUTION!
–Remove battery if it is exhausted
or if the remote control is not to be
used for a long time.
–Batteries contain hazardous
chemical substances, so they should
be disposed of properly.Using the remote control to
operate the system
1Aim the remote control directly at the
remote sensor (iR) on the front panel.
2Press SOURCE button on the remote
to select the mode you wish to control
(for example TV, DISC).  The selected
source mode will light up on the LED
panel for a few seconds.
3Then select the desired function (for
example É,
 S,  T).
Step 2: Switching on the
DVD system

Press SOURCE button repeatedly to
select :
DISC ™ TUNER FM ™ TV ™ AUX
™ DI ™ DISC ....
Switching to Eco Power standby
mode

Press STANDBY ON (B).
➜The display screen will go blank.
➜The Eco Power indicator will light up
in red.
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM19
 
						

							20
3139 115 2xxx1
EnglishStep 3:Setting the TV
After connecting the DVD system to
your TV, you have to switch the TV to the
correct programme number for the input
socket (e.g. ‘EXT’, ‘0’, ‘AV’) in order to
view the playback from the DVD system.
1Press SOURCE button until “DISC”
appears on the display panel.
2Turn on the TV and set it to the correct
video-in channel.  You should see the blue
DVD background screen on the TV.
➜Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV manual for more details.
➜Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
➜Or, the TV remote control may have a
button or switch that chooses between
different video modes.Setting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system).  With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure :
1) Your TV can accept progressive signals,
a progressive scan TV is required.
2) You have connected the DVD system
to your TV using Y Pb Pr (see page 14).
1Turn off your TV progressive scan mode
or turn on interlaced mode (refer to
your TV user manual).
2Press SOURCE button until “DISC”
appears on the display panel.
3Turn on your TV and select the correct
Video Input channel (see page 20).
➜The blue DVD background screen will
appear on the TV.
4Press SETUP MENU on the remote.
5Press 2 to select ‘Video Setup Page’.
6Select { Component } > { YUV }, then
press OK to confirm.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
Component
YUV
RGB
Getting Started (continued)
TIPS:The underlined option is the factory default setting.
To return to the previous menu, press 1.  To remove the menu, press SETUP MENU.
001-049 HTS8000S-00-Eng 22/04/2005, 04:05 PM20