Philips Hts7520 User Manual

11
   
 
 
 
  
 
 
 
 
This speakers placement is for HTS7520 only.
   
Different set of speakers for HTS7500 and 
HTS7540. (see ‘Speci cations’ > ‘Speakers’).
   
  
 
 
 
 
 
 
1  Place this Home Theatre System near to 
the TV
   
 
 
2  Place the speakers system at normal 
listening ear-level and directly parallel to 
the listening area.
   
 
 
3  Place the subwoofer at the corner of the 
room or at least 1 metre (3 feet) away 
from the T V.
  Tip
 
To avoid magnetic inter ference or unwanted   •...

12
   
 
 
 
Option 2: Connect to the component 
video jack
   
 
 
 
 
 
1  Connect the component video cable 
(not supplied) to the  Y Pb Pr 
 jacks on 
this Home Theatre System and the 
COMPONENT VIDEO input jacks on the 
TV.
  Note
 
The component video input jack on the T V   •
might be labelled as  Y Pb Pr 
,  Y Cb Cr  
or  YUV 
.
   
This type of connection provides good picture 
  •
quality.
VIDEO OUT
PbPrY
PbPrY
 
Note
 
You must connect this Home Theatre System   •
directly to a T V....

13
Connect speaker cables to 
speakers
   
 
 
 
 
 
 
1  Match the colour of the cable to the 
terminal tab.
   
 
 
2  Press the terminal tab down and inser t 
the stripped end of the speaker cable, 
then release.
   
 
 
 
 
 
 
Connect speaker to speaker 
stand
   
 
For the speakers of HTS7540 and the front 
speakers of HTS7520 only
   
 
 
 
 
 
 
 
1  Attach the speakers to the speaker stands 
and secure the position with screws.
   
 
 
 
 
 
 
 
 
 
 
 
Option 3: Connect to the Video 
(CVBS)...

14
For HTS7520
   
 
 
  
 
 
 
 
 
 
1  Connect the speakers and subwoofer to 
the matching jacks on this Home Theatre 
System.
  Note
 
Ensure that the colours of the plugs and jacks   •
are matched.
Connect speakers and 
subwoofer
   
 
For HTS7500 and HTS7540 (HTS7540 has a 
different set of speakers)
   
 
 
  
 
 
 
 
EN
 

15
Connect audio cables/other 
devices
   
Route the audio from other devices to this 
Home Theatre System to enjoy audio play with 
multi-channel surround capabilities.
   
 
 
Connect audio to TV
 
 
(also used for EasyLink control)
 
 
  
 
 
 
 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX1 
 jacks on this 
Home Theatre System and the AUDIO 
output jacks on the T V. 
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘AUX1’ is...

16
   
 
Connect to coaxial jack 
 
 
  
 
 
 
 
1  Connect a coaxial cable (not supplied) 
to the  DIGITAL-IN-COAXIAL 
 jack 
on this Home Theatre System and the 
COA XIAL /DIGITAL output jack on the 
device.
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘COA X IN’ is displayed on the 
display panel.
   
  
 
 
 
COAXIAL
DIGITAL OUT
COAXIAL
DIGITAL IN
Connect audio from a cable box, 
recorder or games console
   
You can choose to connect to...

17
   
 
 
 
Connect portable media player
 
 
  
 
 
 
 
1  Connect a 3. 5 mm stereo audio cable 
(not supplied) to the  MP3 LINK 
 jack 
on this Home Theatre System and the 
phone jack on the por table media player 
(such as MP3 player).
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘MP3 LINK’ is displayed on the 
display panel. 
   
 
 
 
Connect USB device
 
 
  
 
 
 
 
1  Connect the USB device to   
 
USB 
 jack 
on this Home Theatre...

18
Connect LAN
   
Connect this Home Theatre System to the 
network for software updates and enjoy BD-
Live applications.
   
 
  
 
 
 
 
 
 
1  Connect the network cable (not 
supplied) to the  LAN 
 jack on this Home 
Theatre System and the L AN jack on the 
broadband modem or router.
  Note
 
Use an RJ45 straight cable. Do not use a   •
crossover cable.
   
Internet access to Philips website for sof tware 
  •
updates may not be allowed, depending on 
the router you use or the Internet Ser vice...

19
  Button  Action
 
  
 
 /  
Move up or down
   
 /  
Move lef t or right
   
OK 
Con rm a selection
 
 
 
Enter numbers
   
 
Access to the Home 
menu.
   
 
 
 
 
Find the correct viewing 
channel
   
 
 
1 Press   
 ( Standby 
) to turn on this 
product.
   
 
 
2 Press  DISC 
 to switch to disc mode.
 
 
 
 
3  Turn on the T V and switch to the correct 
video-in channel in one of the following 
ways:
   
 
 
Go to the lowest channel on your  • 
T V, then press the Channel Down 
button until you...

20
  Tip
 
You can set the default language for DVD disc,   •
see (‘Adjust set tings’ > ‘ Video Setup’ >  [Disc 
Menu] 
).
 
 
 
 
 
 
Set up network
 
 
Follow the steps below to help you set up the 
network connection for software updates and 
enjoy BD-Live applications.
   
 
  
 
 
 
 
 
 
1  Connect the home theatre to a 
broadband modem or router.
   
 
 
2  Turn on your T V and switch to the 
correct source for the home theatre.
   
 
 
3 Press   
, select  [Settings] 
 then press  OK 
.
 
 
 
 
4...