Philips Hts7200 User Manual

10
xSURR. SOUND 
Switch audio output to multi-channel  
surround or stereo mode.
For HTS7200 only: Switch audio  
output to DOLBY Vir tual speaker or 
Stereo mode.
y
 / ( Previous/Next )
In video mode, skip to previous or  
nex t title, chapter or track.
In radio mode, select a preset radio  
station.
z
 / ( Fast Backward  / Fast Forward )
Fast reverse or fast for ward. Press 
repeatedly to change the search speed.
{
 BACK 
Return to a previous menu screen.
|TOP MENU 
Access the main menu of a video...

11
1  Place this Home Theatre System near to 
the TV
2  Place the speakers system at normal 
listening ear-level and directly parallel to 
the listening area.
3  Place the subwoofer at the corner of the 
room or at least 1 metre (3 feet) away 
from the T V.
Tip
To avoid magnetic inter ference or unwanted 
noise, never place this home theatre too close 
to any radiation devices.
Connect video cables
Connect this Home Theatre System to a TV to 
view disc play. Select the best video connection 
that the TV...

12
Option 2: Connect to the component 
video jack
1  Connect the component video cable 
(not supplied) to the  Y Pb Pr jacks on 
this Home Theatre System and the 
COMPONENT VIDEO input jacks on the 
TV.
Note
The component video input jack on the T V 
might be labelled as  Y Pb Pr,Y Cb Cr or  YUV.
This type of connection provides good picture 

quality.
PbPrY
PbPrY
Option 1: Connect to the HDMI jack
1  Connect the HDMI cable to the  HDMI 
OUT jack on this Home Theatre System 
and the HDMI input jack on...

13
Connect speakers and 
subwoofer
1  Connect the speakers and subwoofer to 
the matching jacks on this Home Theatre 
System.
Note
Ensure that the colours of the plugs and jacks 
are matched.
Connect radio antenna
FM (75 Ω) 
ANTENNA
Option 3: Connect to the Video 
(CVBS) jack
1  Connect a composite video cable (not 
supplied) to the  VIDEO jack on this 
Home Theatre System and the VIDEO 
input jack on the T V.
Note
The video input jack on the T V might be 
labelled as  A/V IN,VIDEO IN,COMPOSITE
or...

14
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘AUX1’ is displayed on the 
display panel.
Connect audio from a cable box, 
recorder or games console
You can choose to connect to analogue 
or digital jacks depending on the device 
capabilities.
Connect to analogue jacks
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX2 jacks on this 
Home Theatre System and the AUDIO 
output jacks on the device. 
AUDIO OUT
AUX 2
AUDIO IN
1  Connect the FM...

15
Connect to optical jack
1  Connect an optical cable (not supplied) 
to the  DIGITAL-IN-OPTICAL jack 
on this Home Theatre System and the 
OPTICAL /SPDIF output jack on the 
device.
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘OPTI IN’ is displayed on the 
display panel.
Connect portable media player
DIGITAL INOPTICAL
DIGITAL OUTOPTICAL
MP3
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘AUX2’ is...

16
1  Connect the network cable (not 
supplied) to the  LAN jack on this Home 
Theatre System and the L AN jack on the 
broadband modem or router.
Note
Use an RJ45 straight cable. Do not use a 
crossover cable.
Internet access to Philips website for sof tware 

updates may not be allowed, depending on 
the router you use or the Internet Ser vice 
Provider’s policy. Contact your Internet 
Ser vice Provider for more information. 
Connect power cord
Warning
Risk of product damage! Ensure that the 
power...

17
Navigate through the menu
1  Point the remote control directly at the 
remote sensor on the product and select 
the desired function.
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
Button  Action
Move up or down
Move lef t or right
OKCon rm a selection
Enter numbers
Access to the Home 
menu.
Find the correct viewing 
channel
1 Press   ( Standby) to turn on this 
product.
2 Press  DISC to switch to disc mode.
3  Turn on the T V and switch to the correct...

18
Tip
You can set the default language for DVD disc, 
see (‘Adjust set tings’ > ‘ Video Setup’ >  [Disc 
Menu]).
Set up network
Follow the steps below to help you set up the 
network connection for software updates and 
enjoy BD-Live applications.
1  Connect the home theatre to a 
broadband modem or router.
2  Turn on your T V and switch to the 
correct source for the home theatre.
3 Press  , select  [Settings], and then press 
OK.
4 Select  [Advanced Setup] >[Network] > 
[Next].
5 Press  OK.
The home...

19
Audio Input Mapping
When you map the connection between 
other devices and the audio input jacks of 
this Home Theatre System, you can enjoy 
the System Audio Control (one-touch audio) 
feature.
Map the devices to the audio inputs
Note
Before you star t, ensure that the audio output 
of the HDMI T V and other HDMI devices have 
been connected to the audio input jacks on 
this Home Theatre System. 
1 Press  , select  [Settings], then press  OK.
2 Select  [EasyLink Setup], then press  .
[One Touch Play]...