Philips Hts7200 User Manual

							10
xSURR. SOUND 
Switch audio output to multi-channel  
surround or stereo mode.
For HTS7200 only: Switch audio  
output to DOLBY Vir tual speaker or 
Stereo mode.
y
 / ( Previous/Next )
In video mode, skip to previous or  
nex t title, chapter or track.
In radio mode, select a preset radio  
station.
z
 / ( Fast Backward  / Fast Forward )
Fast reverse or fast for ward. Press 
repeatedly to change the search speed.
{
 BACK 
Return to a previous menu screen.
|TOP MENU 
Access the main menu of a video disc.
EN
 
						

							11
1  Place this Home Theatre System near to 
the TV
2  Place the speakers system at normal 
listening ear-level and directly parallel to 
the listening area.
3  Place the subwoofer at the corner of the 
room or at least 1 metre (3 feet) away 
from the T V.
Tip
To avoid magnetic inter ference or unwanted 
noise, never place this home theatre too close 
to any radiation devices.
Connect video cables
Connect this Home Theatre System to a TV to 
view disc play. Select the best video connection 
that the TV can suppor t.
Option 1: Connect to the HDMI jack (for  
a HDMI, DVI or HDCP-compliant T V ). 
Option 2: Connect to the component  
video jacks (for a standard T V or 
progressive scan T V ).
Option 3: Connect to the video (CVBS)  
jack (for a standard T V ).
Note
You must connect this Home Theatre System 
directly to a T V.
FRONT
RIGHT
FRONT
LEFT
SUBWOOFER
3 Connect
Make the following connections to use your 
Home Theatre System. For a comprehensive 
interactive guide, see www.connectivityguide.
philips.com.
Basic connections:
Video 
Speakers and subwoofer 
Power 
Optional connections:
Radio antenna 
Audio 
Audio from T V 
Audio from cable box /recorder/ 
game console
Other devices 
Por table media player 
USB device 
L AN (Network) 
Note
Refer to the type plate at the back or bot tom 
of the product for identi cation and supply 
ratings.
Before you make or change any connections, 

ensure that all devices are disconnected from 
the socket.
Place the product
Place the product where it cannot be  
pushed, pulled over or knocked down. 
Do not place it in an enclosed cabinet.
Make sure that you have full access to the  
power cord for easy disconnection of the 
product from the power supply.
English
EN
 
						

							12
Option 2: Connect to the component 
video jack
1  Connect the component video cable 
(not supplied) to the  Y Pb Pr jacks on 
this Home Theatre System and the 
COMPONENT VIDEO input jacks on the 
TV.
Note
The component video input jack on the T V 
might be labelled as  Y Pb Pr,Y Cb Cr or  YUV.
This type of connection provides good picture 

quality.
PbPrY
PbPrY
Option 1: Connect to the HDMI jack
1  Connect the HDMI cable to the  HDMI 
OUT jack on this Home Theatre System 
and the HDMI input jack on the T V. 
Tip
If the T V has a DVI connector only, connect via 
a HDMI/DVI adapter. Connect an audio cable 
for sound output.
You can optimise the video output. Press 

HDMI repeatedly to select the best resolution 
the T V can suppor t. 
To play back the digital video images of a BD-

video or DVD-video via an HDMI connection, 
it is necessary that both the Home Theatre 
System and the display device suppor t a 
copyright protection system called HDCP 
(high-bandwidth digital content protection 
system). 
This type of connection provides the best 

picture quality.
HDMI OUT
HDMI IN
EN
 
						

							13
Connect speakers and 
subwoofer
1  Connect the speakers and subwoofer to 
the matching jacks on this Home Theatre 
System.
Note
Ensure that the colours of the plugs and jacks 
are matched.
Connect radio antenna
FM (75 Ω) 
ANTENNA
Option 3: Connect to the Video 
(CVBS) jack
1  Connect a composite video cable (not 
supplied) to the  VIDEO jack on this 
Home Theatre System and the VIDEO 
input jack on the T V.
Note
The video input jack on the T V might be 
labelled as  A/V IN,VIDEO IN,COMPOSITE
or  BASEBAND.
This type of connection provides standard 

picture quality.
Connect speaker cables to 
speakers
1  Match the colour of the cable to the 
terminal tab.
2  Press the terminal tab down and inser t 
the stripped end of the speaker cable, 
then release.
VIDEO
VIDEO OUT
VIDEO IN
English
EN
 
						

							14
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘AUX1’ is displayed on the 
display panel.
Connect audio from a cable box, 
recorder or games console
You can choose to connect to analogue 
or digital jacks depending on the device 
capabilities.
Connect to analogue jacks
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX2 jacks on this 
Home Theatre System and the AUDIO 
output jacks on the device. 
AUDIO OUT
AUX 2
AUDIO IN
1  Connect the FM antenna to the  FM75
jack on this Home Theatre System 
(for some models, this cable is already 
connected).
2  Ex tend the FM antenna and  x its ends to 
the wall.
Tip
For bet ter FM stereo reception, connect to an 
ex ternal FM antenna.
Connect audio cables/other 
devices
Route the audio from other devices to this 
Home Theatre System to enjoy audio play with 
multi-channel surround capabilities.
Connect audio to TV
(also used for EasyLink control)
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX1 jacks on this 
Home Theatre System and the AUDIO 
output jacks on the T V. 
AUDIO OUT
AUX 1
AUDIO IN
EN
 
						

							15
Connect to optical jack
1  Connect an optical cable (not supplied) 
to the  DIGITAL-IN-OPTICAL jack 
on this Home Theatre System and the 
OPTICAL /SPDIF output jack on the 
device.
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘OPTI IN’ is displayed on the 
display panel.
Connect portable media player
DIGITAL INOPTICAL
DIGITAL OUTOPTICAL
MP3
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘AUX2’ is displayed on the 
display panel.
Connect to coaxial jack
1  Connect a coaxial cable (not supplied) 
to the  DIGITAL-IN-COAXIAL jack 
on this Home Theatre System and the 
COA XIAL /DIGITAL output jack on the 
device.
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘COA X IN’ is displayed on the 
display panel.
COAXIAL
DIGITAL OUT
COAXIAL
DIGITAL IN
English
EN
 
						

							16
1  Connect the network cable (not 
supplied) to the  LAN jack on this Home 
Theatre System and the L AN jack on the 
broadband modem or router.
Note
Use an RJ45 straight cable. Do not use a 
crossover cable.
Internet access to Philips website for sof tware 

updates may not be allowed, depending on 
the router you use or the Internet Ser vice 
Provider’s policy. Contact your Internet 
Ser vice Provider for more information. 
Connect power cord
Warning
Risk of product damage! Ensure that the 
power supply voltage corresponds to the 
voltage printed on the back or the underside 
of the product.
1  Connect the power cord to the socket 
when all the required connections are 
made.
This product is ready to be set up for  »
use.
LAN
BROADBAND
1  Connect a 3. 5 mm stereo audio cable 
(not supplied) to the  MP3 LINK jack 
on this Home Theatre System and the 
phone jack on the por table media player 
(such as MP3 player).
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘MP3 LINK’ is displayed on the 
display panel. 
Connect USB device
1  Connect the USB device to  USB jack 
on this Home Theatre System.
Note
This Home Theatre System can only play/view 
MP3, WMA, DivX (Ultra) or JPEG  les that are 
stored on such devices.
Press  
USB to access the content and play the 
 les.
Connect LAN
Connect this Home Theatre System to the 
network for software updates and enjoy BD-
Live applications.
EN
 
						

							17
Navigate through the menu
1  Point the remote control directly at the 
remote sensor on the product and select 
the desired function.
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
Button  Action
Move up or down
Move lef t or right
OKCon rm a selection
Enter numbers
Access to the Home 
menu.
Find the correct viewing 
channel
1 Press   ( Standby) to turn on this 
product.
2 Press  DISC to switch to disc mode.
3  Turn on the T V and switch to the correct 
video-in channel in one of the following 
ways:
Go to the lowest channel on your  
T V, then press the Channel Down 
button until you see the Philips or 
the Home menu screen.
Press the   
 SOURCE button 
repeatedly on the remote control of 
your T V. 
Tip
The video-in channel is between the lowest 
and highest channels and may be called 
FRONT, A / V IN, VIDEO, HDMI etc. See the 
T V user manual on how to select the correct 
input on the T V.
4 Get started
Insert the remote control 
batteries
1  On the back of the remote control, slide 
the batter y cover to remove it.
2  Inser t the 2 supplied batteries (A A A). Be 
sure the + and - ends of the batteries line 
up with the markings inside the case.
3  Slide the cover back into position.
Note
Do not mix bat teries (old and new or carbon 
and alkaline, etc.).
Remove bat teries if they are exhausted or if 

the remote control is not to be used for a long 
time.
Bat teries contain chemical substances, they 

should be disposed of properly.
English
EN
 
						

							18
Tip
You can set the default language for DVD disc, 
see (‘Adjust set tings’ > ‘ Video Setup’ >  [Disc 
Menu]).
Set up network
Follow the steps below to help you set up the 
network connection for software updates and 
enjoy BD-Live applications.
1  Connect the home theatre to a 
broadband modem or router.
2  Turn on your T V and switch to the 
correct source for the home theatre.
3 Press  , select  [Settings], and then press 
OK.
4 Select  [Advanced Setup] >[Network] > 
[Next].
5 Press  OK.
The home theatre connects to the  »
Internet. If connection fails, select 
[Retry], then press  OK.
6 Select  [Finish], then press  OK to exit.
Note
Loading BD-Live content from the Internet 
may take some time, depending on the  le size 
and the speed of the Internet connection.
Use the Home menu
Press   ( Home menu).
Select   [Play Disc] to star t disc play. 
Select   [USB] to view the USB contents.
Select   [Settings] to access the setup 
menu. 
Select menu display language
Note
Skip this set ting if this product is connected 
to a HDMI CEC compliant T V. It switches 
automatically to the same OSD menu language 
as per your T V set ting.
1  In the Home menu, select  [Settings] and 
press  OK.
2 Select  [Preference Setup], then press  .
3 Select  [OSD Language], then press  OK.
The language options are different  
depending on your countr y or 
region. It may not correspond to the 
illustration shown here.
4 Press   to select a language, then press 
OK.
Play DiscUSBSettings
Parental Control OSD Language
Screen Saver
Display Panel
Auto Standby
PBC Change PIN
Sleep TimerNederlands Français
Deutsch
Italiano
Es pañol
Svenska
Português
English
EN
 
						

							19
Audio Input Mapping
When you map the connection between 
other devices and the audio input jacks of 
this Home Theatre System, you can enjoy 
the System Audio Control (one-touch audio) 
feature.
Map the devices to the audio inputs
Note
Before you star t, ensure that the audio output 
of the HDMI T V and other HDMI devices have 
been connected to the audio input jacks on 
this Home Theatre System. 
1 Press  , select  [Settings], then press  OK.
2 Select  [EasyLink Setup], then press  .
[One Touch Play] and  [One Touch 
Standby] functions are turned on by 
default.
3 Select  [System Audio Control] >[On] .
4  Read the on-screen instructions and 
press  OK to select  [Continue].
The Home Theatre System scans and  »
displays the valid devices.
5 Press  OK to select  [Continue].
Video Setup
Advanced Setup Audio Setup
Preference Setup
EasyLink SetupOne Touch Play EasyLink
One Touch StandbyOn
On
System Audio ControlOff
Audio Input MappingOn
Use Philips EasyLink
Your product suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
Note
Philips does not guarantee 10 0% 
interoperability with all HDMI CEC devices.
1  Turn on the HDMI CEC operations on 
the T V and other connected devices. See 
T Vs/devices manual for details.
2  You can now enjoy the following Philips 
EasyLink controls.
EasyLink
Turn off or turn on all EasyLink features.
One-touch play
When you press  PLAY on the remote 
control, the T V (if it suppor ts one-touch 
play) and the Home Theatre System will be 
turned on. Disc play star ts if there is a disc 
in the Home Theatre System and the T V 
automatically switches to the correct channel 
to show the video content.
One-touch standby
When you press and hold  
 ( Standby) on 
the remote control, this Home Theatre 
System and all the connected HDMI CEC 
devices (if they suppor t one-touch standby) 
switch to standby mode simultaneously.
System Audio Control
When you play a device where the audio 
output is routed to this Home Theatre 
System, this Home Theatre System 
switches to the corresponding audio source 
automatically.
To use one-touch audio, map the connected 
devices correctly to the audio input jacks of 
this Home Theatre System.
English
EN