Philips Hts6520 User Manual

11
   
 
 
 
Option 1: Connect to the HDMI jack
 
 
 
 
 
 
 
1  Connect an HDMI cable (not supplied) 
to the  HDMI OUT 
 jack on this Home 
Theater System and the HDMI input jack 
on the T V.
  Note
 
If your device suppor ts HDMI CEC , you can   •
control compliant devices with a single remote 
control. (see ‘Get star ted’ > ‘Use Philips 
EasyLink’).
  Tip
 
If the T V has a DVI connection only, connect   •
via a HDMI/DVI adaptor. Connect an audio 
cable for sound output.
   
You can optimize the video...

12
   
 
 
 
Option 3: Connect to the Video 
(CVBS) jack
   
 
 
 
 
 
1  Connect a composite video cable to the 
  VIDEO OUT 
 jack on this Home Theater 
System and the VIDEO input jack on the 
TV.
  Note
 
The video input jack on the T V might be   •
labeled as A / V IN, VIDEO IN, COMPOSITE or 
BASEBAND. 
   
This type of connection provides standard 
  •
picture quality.
VIDEO 
OUT
VIDEO IN
   
 
 
 
Option 2: Connect to the component 
video jack
   
  
 
 
 
 
1  Connect the component video cable to...

13
   
 
 
 
 
Connect radio antenna
 
 
 
 
 
 
 
 
 
 
1  Connect the FM antenna to the  FM75 
  
 
jack on the subwoofer (for some models, 
this cable is already connected).
   
 
 
2  Ex tend the FM antenna and  x its ends to 
the wall.
  Tip
 
For bet ter FM stereo reception, connect to an   •
ex ternal FM antenna.
FM ANTENNA
(75 Ω)
   
 
 
 
 
Connect speakers and 
subwoofer
   
 
 
 
 
 
 
 
 
 
 
 
 
 
1  Connect the lef t and right speakers to the 
matching jacks on the subwoofer.
   
 
 
2...

14
   
 
 
 
Connect audio from cable box/
recorder/game console
   
You can choose to connect to analog or digital 
jack depending on the device capabilities.
   
  
 
 
 
Connect to analog jacks 
 
 
  
 
 
 
 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX2 
 or  AUX3 
 jacks 
on the subwoofer and the AUDIO output 
jacks on the device. 
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘AUX2 INPUT’ or ‘AUX3 
INPUT’ is displayed...

15
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘OPTICAL INPUT’ is displayed 
on the display panel.
   
 
 
 
Connect portable media player
 
 
  
 
 
 
 
1  Connect a 3. 5mm stereo audio cable (not 
supplied) to the  MP3 LINK 
 jack on this 
Home Theater System and the phone 
jack on the por table media player (such as 
MP3 player).
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘MP3...

16
   
 
 
 
Connect iPod
 
 
  
 
 
 
 
1  Push the ‘slide’ button (A) to one side 
and move the ‘holder’ (C) until you get 
the best position to  t your iPod.
   
 
 
2  Release the ‘slide’ button (A).
 
 
 
 
3  Select a matching dock adaptor (D) and 
attach it to the ‘holder’ (C).
   
 
 
4  Dock your iPod to  iPod DOCK 
 slot on 
this Home Theater System.
  Note
 
To listen to the audio output from this   •
connection, press  iPod DOCK 
.
DOCK POSITION SWITCH
A
C
B
D
 
 
 
 
 
Connect USB device...

17
   
 
 
 
 
 
 
 
Attach table stand
 
 
 
  
 
 
 
 
 
 
A  = table stand bracket.
 
 
 
 
 
 
 
 
1  Ensure all the required cables are 
connected to this Home Theater System 
and close the rear cover.
   
 
 
2  Attach the table stand bracket to the rear 
of this Home Theater System.
   
 
 
Align the arrow indicators for  • 
correct positioning and placement.
   
 
 
Use the protrude panels to hold the  • 
table stand bracket.
Align Arrow With table Stand
A
A
Align Arrow 
With table Stand
A...

18
   
  
 
 
 
 
5  Screw the supplied knob to the hole at 
the center rear to secure the bracket.
   
 
 
  
 
 
 
 
 
 
 
 
 
 
Mount the Home Theater 
System
  Caution
 
Risk of personal injur y and damage to the   •
product. Allow only quali ed persons to 
mount the product.
   
 
 
1  Ensure all the required cables are 
connected to this Home Theater System 
and close the rear cover.
   
 
 
2  Attach the big wall mount bracket to the 
table stand bracket with screws.
   
 
 
 
 
 
3  Position the...

19
   
 
 
3  Fix two screws (not supplied) to the wall, 
then hook the bracket onto the screws 
and lock the speaker into position.
   
 
 
  
 
 
 
 
 
Mount the speakers
 
Caution
 
Risk of personal injur y and damage to the   •
product. Allow only quali ed persons to 
mount the product.
   
 
 
1  Loosen the screws at the bottom of the 
speaker to remove the speaker stand.
   
  
 
 
 
 
2  Attach the small wall mount bracket to 
the speaker with screws.
   
  
English
EN
 
 
 
 
 
 
Connect
 

20
   
 
 
 
Control a play source
 
 
 
 
1 Press   
 
RADIO 
,  USB 
 or  DISC 
 button to 
select the source you wish to control.
   
 
 
2  Select the desired function (for example  
 
,   
). 
 
 
 
 
 
 
 
Navigate through the menu
 
 
  
 
 
 
 
1  Point the remote control directly at the 
remote sensor on the product and select 
the desired function.
   
 
 
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
  Button  Action
 
  
  
Move up or down...