Philips Hts6120 User Manual

							31
   
 
 
 
 
 
Control iPod music
 
 
 
 
 
 
 
 
 
 
 
1  Connect the docking station to the  FOR 
iPod DOCK 
 jack on this Home Theater 
System.
   
 
 
2  Dock your iPod to the docking station 
and turn it on.
   
 
 
3 Press  iPod DOCK 
. 
   
 
 
It may require longer time to  • 
authenticate the compatibility of 
cer tain iPod range. 
   
 
 
 
 
4  Star t play on your iPod. 
   
 
 
To view iPod video play, connect a  • 
video cable from the docking station 
to your T V and turn on ‘T V ON’ 
setting in your iPod.
   
 
 
 
 
5  Use the remote control to control the 
music play. 
VIDEO INVIDEO IN
   
 
 
 
 
Play from iPod
 
 
You need an iPod docking station (optional 
accessor y - not supplied) to enjoy your iPod 
play through this Home Theater System.
   
List of suppor ted iPod range:
 
iPod mini  iPod mini 2nd gen
  iPod touch  iPod touch 2nd 
gen
  iPod classic (80/120/160 
GB)  iPod nano 
1st/2nd/3rd/4th 
gen
  iPod with color display  iPod photo
  iPod 4th/5th gen
 
Note
 
Refer to the Philips website for latest updates   •
on the suppor ted iPod range.
 
 
 
 
Prepare the docking station
 
 
If your iPod cannot  t into the docking station, 
adjust the ‘suppor t’ as below.
   
  
 
 
 
 
1  Turn the knob at the bottom of the 
docking station anti-clock wise to loosen 
the adjustable ‘suppor t’.
   
 
 
2  Adjust the ‘suppor t’ until it can  t your 
iPod.
   
 
 
3  Turn the knob clock wise to tighten it.
1
2
English
EN
Play
 
						

							32
   
 
 
 
 
Play from radio
 
 
Check if the FM antenna has been connected 
to this Home Theater System. If not, connect 
the supplied FM antenna to the  FM75  
 
 
 jack 
and  x its ends to the wall.
   
 
 
 
Tip
 
For bet ter FM stereo reception, connect an   •
ex ternal FM antenna (not supplied).
   
Position the antenna as far away as possible 
  •
from your T V, VCR or other radiation source 
to prevent interference.
   
 
 
 
First time tuning
 
 
When you access to radio mode for the  rst 
time, follow the instructions to install the radio 
stations. 
   
 
 
1 Press  RADIO 
.
   
 
 
’AUTO INSTALL ... PRESS PLAY’ is    »
displayed. 
   
 
 
 
 
2 Press   
.
   
 
 
All detected radio stations are stored.   »
   
 
 
Once complete, it tunes to the  rst    »
preset radio station.
   
 
 
 
 
 
 
To stop auto tuning, press   • 
 
.
 
Note
 
This Home Theater System can store up to a   •
maximum of 40 radio stations.
   
If auto installation is not activated or less 
  •
than 5 radio stations are stored, you will be 
prompted to install the radio stations again.
FM ANTENNA
(75 Ω)
  Button  Action
 
 
VOL +/- 
Increases or decreases 
volume.
   
SOUND 
Selects a prede ned sound 
effect.
   
AMBISOUND 
Selects stereo sound output 
or multi-channel surround 
output.
   
 
  
Skips to the previous or nex t 
track.
   
 
 /   
Searches fast-for ward (right) 
or fast-back ward (lef t). Press 
repeatedly to change the 
search speed.
   
 
Star ts, pauses or resumes 
playback on your EasyLink 
device.
   
 
 
 INFO 
Switches to ‘Ex tended 
Control mode’ to enable 
control of your iPod play 
through the contents 
displayed on T V. 
   
Control buttons on iPod 
have no function in this 
mode.
   
Press this button again to 
return to simple play mode.
  Note
 
While in iPod mode, the bat ter y of your iPod   •
will be charged.
   
In ‘Ex tended Control mode’, control of iPod 
  •
play is only possible through the screen display 
on your T V using the  Navigation buttons 
 on 
the remote control.
EN
 
						

							33
   
 
 
 
Search and store radio stations 
individually
   
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
 /   
.
   
 
 
It star ts searching until a radio station    »
is detected.
   
 
 
 
 
3  Repeat step 2 until you tune to the radio 
station you wish to store.
   
 
 
To  netune the radio frequency,  • 
press  
   /   
.
 
 
 
 
 
 
4 Press  PROGRAM 
.
   
 
 
The preset station number blinks.   »
   
 
 
If no action is carried out within 20    »
seconds after the above step, it exits 
the preset mode.
   
 
 
 
 
5 Press   
 /  
 (or the  Numeric buttons 
) to 
select a preset number to store.
   
 
 
6 Press  PROGRAM 
 to con rm.
 
 
 
 
 
 
 
Change tuning grid
 
 
In some countries, the frequency step 
between adjacent channels in FM band is 50 
kHz or 100 kHz.
  Note
 
This feature only applicable for cer tain region.  •
 
 
Change tuning grid erases all preset radio   •
stations.
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
.
 
 
 
 
3  Press and hold   
 until ‘GRID 9’ or 
‘GRID 10’ is displayed.
   
 
 
‘GRID 9’ for 50 kHz and ‘GRID 10’ for    »
100 kHz.
   
 
 
 
Listen to radio
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Use the remote control to control the 
radio. 
  Button  Action
 
  
  
Selects a preset radio station.
   
 
  
Tunes the radio frequency up or 
down.
   
 
Press and hold this button to 
erase the current radio station 
from the preset list.
   
The preset number for other 
radio stations remain unchanged.
  Tip
 
Press    •AUDIO SYNC 
 to toggle between FM 
stereo and FM mono mode.
   
 
 
 
Reinstall all the radio stations
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Press and hold  PROGRAM 
 for more than 
5 seconds.
   
 
 
All previously stored radio stations are    »
replaced.
  Note
 
Check the radio antenna connection if no   •
stereo signal is detected or less than 5 stations 
are detected during radio installation.
English
EN
Play
 
						

							34
   
 
 
 
Select a preset sound
 
 
 
 
 
 
 
1 Press  SOUND MODE 
 repeatedly to 
select the sound effect that most suitable 
for the video or music you play.
  Video/Music   Description
 
 
ACTION 
 / 
  ROCK  Enhanced low and high range 
for great sounding movie 
effects and atmosphere. 
Great for action movies and 
rock/pop music.
   
CONCERT 
 
 
/ 
  CLASSIC  Flat and pure sound mode. 
Ideal for listening to classical 
music and watching live 
concer t disc.
   
DRAMA 
 / 
  JAZZ  Clear mid and high range. 
Recreates the atmosphere of 
a live club with the ar tist just 
in front of you. Good for jazz 
music and watching dramas.
   
NEWS 
Enhanced mid range for clear 
vocals/speech.
   
GAMING 
 / 
  PART Y  Slightly enhanced low range 
and strong mid range ideal 
for par ty music and video 
gaming.
   
SPORTS 
Moderate mid range and 
surround effects for clear 
vocals and the atmosphere of 
a live spor ts venue.
   
 
 
 
 
 
 
 
 
 
6 Adjust sound
 
 
 
Control the volume
 
 
 
 
1 Press   
 
 +/- 
 ( VOL +/- 
) to increase or 
decrease the volume.
   
 
 
To mute, press   • 
 
.
   
 
 
To restore the volume, press   • 
 
 again 
or press  VOL + 
.
 
 
 
 
 
 
 
Adjust Bass/Treble
 
    
 
 
 
 
 
 
1 Press  TREBLE 
 or  BASS 
.
 
 
 
 
2  Within 5 seconds, press   
 
 +/- 
 ( VOL +/- 
) 
to set the high ( TREBLE) or low (BASS) 
tone level.
   
 
 
 
 
 
Select Ambisound
 
 
 
 
 
 
 
1 Press  AMBISOUND 
 repeatedly to select 
the best Ambisound output that most 
suitable for the video or music you play.
  Option  Description
 
 
AUTO 
Surround output based on the 
audio stream.
   
MULTI-
CHANNEL  5.1 multi-channel output for a 
standard movie experience.
   
STEREO 
Stereo sound from two front 
speakers.
EN
 
						

							35
   
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in   •
the following pages.
 
 
 
 
  
 
 
 
 
 
[EasyLink Setup] 
   
If this Home Theater System is connected 
to HDMI CEC compliant T V/devices, all 
connected devices can respond to the 
following commands simultaneously:
  Option  Description
 
 
[EasyLink] 
Turns off or on all EasyLink 
features.
   
To disable this feature, select 
  [Of f ] 
.
   
[One 
To u c h  
Play]  When you press  PLAY 
, the 
T V and Home Theater System 
are turned on. Disc play star ts 
if there is a disc in the Home 
Theater System. 
   
To disable this feature, select 
  [Of f ] 
.
   
[One 
To u c h  
Standby]  When you press and hold 
  STANDBY 
 for at least 3 seconds, 
the Home Theater System and all 
the HDMI CEC devices switch to 
standby simultaneously. 
   
To disable this feature, select 
  [Of f ] 
.
 
 
 
 
 
 
7 Adjust settings
 
 
You can customize various kinds of settings as 
you prefer. Refer to the following instructions to 
navigate through the setup menus. 
  Symbol  Options
 
 
 
 
[General Setup]
 
 
 
 
[Audio Setup]
 
 
 
 
[Video Setup]
 
 
 
 
[Preferences]
 
Note
 
If the setup option is grayed out, it means the   •
set ting cannot be changed at the current state.
 
 
 
 
 
General setup
 
 
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
.
OSD Language
Sleep Timer Screen Saver Disc Lock EasyLink Setup
Display Dim
General Setup
Low Power Standby
DivX(R) VOD Code
Adjust settings
English
EN
 
						

							36
   
 
 
 
[Display Dim] 
   
Changes the brightness level of the display 
panel on this Home Theater System.
   
 
 
  • [10 0%]  
– Normal brightness.
   
 
 
  • [70%]  
– Medium brightness.
   
 
 
  • [4 0%] 
 – Dimmest display.
 
 
 
 
  
 
 
 
 
 
[OSD Language] 
   
Selects the default on-screen menu language.
 
 
  
 
 
 
 
 
[Screen Saver] 
   
Turns off or on the screen saver mode. Helps 
to protect the T V screen from being damaged 
due to over exposure to a static image for too 
long.
   
 
 
  • [On] 
 – Sets the screen saver to appear 
af ter 15 minutes of inactivity (for 
example, in pause or stop mode).
   
 
 
  • [Of f ] 
 – Disables screen saver mode.
 
 
 
 
  
 
 
 
 
 
[Sleep Timer] 
   
Switches to standby automatically af ter the 
preset time.
   
 
 
  • [15 mins] 
,  [30 mins] 
,  [45 mins] 
,  [60 mins] 
 
– Selects the count down time before 
the Home Theater System switches to 
standby.
   
 
 
  • [Of f ] 
 – Disables sleep timer mode.
 
 
 
 
  
 
 
 
 
 
[Low Power Standby] 
   
Turns off or on the low power standby mode. 
Reduces power consumption in standby 
mode.
   
 
 
  • [On] 
 – Sets the standby mode to low 
power.
   
 
 
  • [Of f ] 
 – Sets the standby mode to normal 
power.
   
 
 
  
 
 
 
 
 
[DivX(R) VOD Code] 
   
Displays the DivX® registration code.
 
Option  Description
 
 
[System 
Audio 
Control]  When you play audio that is 
routed from the connected 
devices, this Home Theater 
System switches to the 
corresponding audio source 
automatically.
   
To enable this feature, select 
  [On] 
. Then proceed to  [Audio 
Input Mapping] 
 to scan and map 
all the connected devices.
   
[Audio 
Input 
Mapping]  When you map the audio 
input correctly, this Home 
Theater System switches to the 
audio from the played device 
automatically.
  Note
 
You must turn on the HDMI CEC operations   •
on the T V/devices before you can enjoy the 
EasyLink controls. See the T V/devices manual 
for details.
   
Philips does not guarantee 10 0% 
  •
interoperability with all HDMI CEC compliant 
devices.
   
 
 
 
[Disc Lock] 
   
Sets play restriction for a speci c discs. 
Before you star t, place the disc in the disc 
compar tment (maximum 40 discs can be 
locked).
   
 
 
  • [Lock] 
 – Restricts access to the current 
disc. Once activated, a password is 
needed to unlock and play the disc. 
   
 
 
  • [Unlock] 
 – Plays all discs.
 
Tip
 
You can set or change the password (see   •
‘Adjust set tings’ > ‘Preferences’ >  [Password] 
).
EN
 
						

							37
   
 
 
 
[Ambisound Setup] 
   
Optimizes the Ambisound based on this 
Home Theater System setup in the room (see 
‘Getting Star ted’ > ‘Star t Ambisound setup’).
  Option  Description
 
 
[Setup 
Guide]  Guides you through the 
complete setup requirements.
   
[Room 
Acoustics]  Selects the type of walls that 
surround the room.
   
[Room 
Placement]  Selects the placement in the 
room.
   
[Height] 
Selects the height at which it is 
placed.
   
[Listening 
Position]  Selects the distance between 
the listening postion and this 
Home Theater System.
   
  
 
 
 
 
 
[HDMI Audio] 
   
Selects the HDMI audio setting when you 
connect this Home Theater System and the 
T V with a HDMI cable.
   
 
 
  • [On] 
 – Allows audio output through the 
T V and the speaker system. If the audio 
format on the disc is not suppor ted, it 
will be downmixed to two-channel sound 
(linear-PCM). 
   
 
 
  • [Of f ] 
 – Disables audio output from the 
T V. The sound is only output through the 
speaker system.
   
 
 
  
 
 
 
 
 
[Night Mode] 
   
Makes loud sound level sof ter and sof t sound 
level louder so that you can watch the DVD 
movies at a low volume, without disturbing 
others.
   
 
 
  • [On] 
 – Enjoys quiet viewing at night.
   
 
 
  • [Of f ] 
 – Enjoys surround sound with a full 
dynamic range.
  Note
 
Applicable only to Dolby Digital encoded discs.  •
 
Tip
 
Enter this Home Theater System DivX   •
registration code when you rent or purchase 
video from w w w.div x.com/vod. The DivX 
videos rented or purchased through the 
DivX® VOD ( Video On Demand) ser vice 
can be played only on the device to which it is 
registered.
   
 
 
 
 
Audio setup
 
 
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Audio Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in   •
the following pages.
HDMI Audio Ambisound Setup
Night Mode
Audio Setup
Adjust settings
English
EN
 
						

							38
   
 
 
 
[TV Display] 
   
Selects one of the following display formats:
 
 
 
 
 
 
 
  • [4:3 Pan Scan] 
 – For 4:3 screen T V: full-
height display with the trimmed sides.
   
 
 
  • [4:3 Let ter Box] 
 – For 4:3 screen T V: 
wide-screen display with black bars on 
the top and bottom of the screen.
   
 
 
  • [16:9 Wide Screen] 
 – For wide-screen 
T V: display ratio 16:9.
   
 
 
  
 
 
 
 
 
[Picture Setting] 
   
Selects a prede ned set of picture color 
settings or customize the personal setting.
   
 
 
  • [Standard] 
 – Original color setting.
   
 
 
  • [Bright] 
 – Vibrant color setting.
   
 
 
  • [Soft] 
 – Warm color setting.
   
 
 
  • [Personal] 
 – Customizes the color set ting. 
Set the level of brightness, contrast, 
sharpness/tint and color saturation, then 
press  OK 
.
 
 
 
 
  
 
 
 
 
 
[HDMI Setup] 
   
Selects the HDMI video setting when you 
connect this Home Theater System and the 
T V with a HDMI cable.
   
 
 
  • [Wide Screen Format] 
 – De nes wide 
screen format for disc play.
  Option  Description
 
 
[Superwide] 
Center position of the screen 
is stretched less than the side. 
Applicable only to 720p and 
above video resolution setting.
   
[4:3 Pillar 
Box]  No stretching of picture. Black 
bars are displayed on both 
sides of the screen.
   
[Of f ] 
Picture is displayed according to 
the disc format.
4:3 Letter Box (LB) 4:3 Pan Scan (PS)
16:9 (Wide Screen)
   
 
 
 
 
Video setup
 
 
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Video Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in   •
the following pages.
 
 
 
 
 
[TV System] 
   
Change this setting if the video does not 
appear correctly. By default, this setting 
matches the most common setting for T Vs in 
your country.
   
 
 
  • [PAL] 
 – For PAL-system T V.
   
 
 
  • [NTSC] 
 – For NTSC-system T V.
   
 
 
  • [Multi] 
 – For T V that is compatible with 
both PAL and NTSC .
   
 
 
  
Video Setup
HDMI Setup
Progressive Closed Caption TV Display TV System
Picture Setting
EN
 
						

							39
   
 
 
 
 
Preferences
 
Note
 
Stop disc play before you can access to   •
 
[Preferences] 
.
 
 
 
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Preferences] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in   •
the following pages.
 
 
 
 
 
[Audio] 
   
Selects the default audio language for disc play.
 
 
  
 
 
 
[Subtitle] 
   
Selects the default subtitle language for disc 
play.
   
  
 
 
 
[Disc Menu] 
   
Selects the language for disc menu.
Parental
MP3/JPEG Display PBC SubtitleAudio
Preferences
Disc Menu
DivX Subtitle Password
  Note
 
This set ting is only available if you have set the   •
 
[TV Display] 
 set ting to  [16:9 Wide Screen] 
.
 
 
 
 
  • [HDMI Video] 
 – Selects the HDMI video 
output resolution that is compatible with 
your T V display capability.
  Option  Description
 
 
[Auto] 
Detects and selects the best 
suppor ted video resolution 
automatically.
   
[48 0 i] 
,  [48 0 p] 
, 
  [576i] 
,  [576p] 
, 
  [720p] 
, 
  [10 8 0i] 
, 
  [10 8 0p]  Selects a video resolution 
that is best suppor ted by the 
T V. See the T V manual for 
details.
  Note
 
If the set ting is not compatible with your T V, a   •
blank screen appears. Wait for 15 seconds for 
auto recover or press  HDMI 
 repeatedly until 
the picture appears.
   
 
 
 
[Closed Caption] 
   
Turns off or on display captions.
   
 
 
  • [On] 
 – Shows the sound effects in 
subtitles. Applicable only to discs with 
Closed Caption information included and 
the TV suppor ts this feature.
   
 
 
  • [Of f ] 
 – Disables closed caption.
 
 
 
 
  
 
 
 
 
 
[Progressive] 
   
If the T V suppor ts progressive scan output, 
you can turn on the progressive scan mode to 
enhance the picture quality. Video connection 
through Component Video is required. 
   
 
 
  • [On] 
 – Turns on progressive scan mode.
   
 
 
  • [Of f ] 
 – Disables progressive scan mode.
 
Tip
 
There is more detailed description available   •
(see ‘Get star ted’ > ‘Turn on Progressive 
Scan’).
English
EN
Adjust settings
 
						

							40
   
 
 
 
[MP3/JPEG Display] 
   
Selects to display the folders or display all the 
 les.
   
 
 
  • [View Folders] 
 – Displays the folders of 
MP3/WMA  les.
   
 
 
  • [View Files] 
 – Displays all the  les.
   
 
 
 
 
 
[Password] 
   
Sets or changes the password for locked discs 
and play restricted DVDs.
   
  
 
1) Press the  Numeric buttons 
 to enter 
‘136900’ or the last set password at  [Old 
Password] 
  eld.
   
2) Enter the new password at  [New 
Password] 
  eld.
   
3) Enter the new password again at  [Con rm 
Password] 
  eld.
   
4) Press  OK 
 to exit the menu.
 
Note
 
If you forget the password, enter ‘13690 0’   •
before you set a new password.
Old Password
New Password
Confirm Password
OK Change Password
  Note
 
If the language you have set is not available on   •
the disc, the disc uses its own default language.
   
For some discs, the subtitle/audio language can 
  •
only be changed from the disc menu.
   
To select the languages that are not listed 
  •
in the menu, select  [Others] 
. Then check 
the Language Code list at the back of this 
user manual and enter the respective 4-digit 
language code.
   
 
 
 
[Parental] 
   
Restricts access to discs that are unsuitable 
for children. These types of discs must be 
recorded with ratings.
  1) Press  OK 
.
   
2) Select a rating level, then press  OK 
.
   
3) Press the  Numeric buttons 
 to enter the 
password.
  Note
 
Rated discs above the level you set in   •
 
[Parental] 
 require a password to be played.
   
The ratings are countr y-dependent. To allow 
  •
all discs to play, select ‘ 8 
’.
   
Some discs have ratings printed on them but 
  •
are not recorded with ratings. This function 
has no effect on such discs.
  Tip
 
You can set or change the password (see   •
‘Preferences’ >  [Password] 
).
 
 
 
 
 
[PBC] 
   
Turns off or on the content menu of VCDs/
SVCDs with PBC (playback control) feature.
   
 
 
  • [On] 
 - Displays index menu when you 
load a disc for play.
   
 
 
  • [Of f ] 
 - Skips the menu and star t play 
from the  rst title.
   
 
 
  
EN