Philips Hts6120 User Manual

11
   
 
 
 
Option 3: Connect to the Video 
(CVBS) jack
   
  
 
 
 
 
1  Connect a composite video cable to the 
  VIDEO OUT 
 jack on this Home Theater 
System and the VIDEO input jack on the 
TV.
  Note
 
The video input jack on the T V might be   •
labeled as A / V IN, VIDEO IN, COMPOSITE or 
BASEBAND. 
   
This type of connection provides standard 
  •
picture quality.
VIDEO OUT
VIDEO IN
 
Tip
 
If the T V has a DVI connection only, connect   •
via a HDMI/DVI adaptor. Connect an audio 
cable for...

12
   
 
 
 
 
 
 
Connect radio antenna
 
 
 
  
 
 
 
 
 
 
1  Connect the FM antenna to the  FM75 
  
 
jack on the subwoofer (for some models, 
this cable is already connected).
   
 
 
2  Ex tend the FM antenna and  x its ends to 
the wall.
  Tip
 
For bet ter FM stereo reception, connect to an   •
ex ternal FM antenna.
FM ANTENNA
(75 Ω)
   
 
 
 
 
Connect subwoofer
 
 
 
  
 
 
 
 
 
 
1  Unwind the subwoofer’s interconnect 
cable at  TO MAIN UNIT 
.
 
 
 
 
2  Connect the white end of 
the...

13
   
 
 
 
Connect audio from cable box/
recorder/game console
   
You can choose to connect to analog or digital 
jack depending on the device capabilities.
   
  
 
 
 
Connect to analog jacks 
 
 
 
 
 
 
 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX2 
 or  AUX3 
 jacks 
on the subwoofer and the AUDIO output 
jacks on the device. 
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘AUX2 INPUT’ or ‘AUX3 
INPUT’ is displayed on...

14
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘OPTICAL INPUT’ is displayed 
on the display panel.
   
 
 
 
Connect portable media player
 
 
  
 
 
 
 
1  Connect a 3. 5mm stereo audio cable (not 
supplied) to the  MP3 LINK 
 jack on this 
Home Theater System and the phone 
jack on the por table media player (such as 
MP3 player).
  Note
 
To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘MP3...

15
  Note
 
To listen to the audio output from this   •
connection, press  iPod DOCK 
.
 
 
 
 
 
 
Connect power cord
 
Warning
 
Risk of product damage! Ensure that the   •
power supply voltage corresponds to the 
voltage printed on the back or underside of 
the subwoofer. Set the voltage selector (if any) 
correctly before you connect the subwoofer 
to the power outlet.
   
 
 
1  Connect the power cord to the power 
outlet when all the required connections 
are done.
   
 
 
The Home Theater System...

16
   
  
 
 
 
 
5  Position the supplied bracket on the wall, 
drill the screw holes and inser t the rubber 
wall plugs (not supplied) into the holes.
   
 
 
To mount this Home Theater System  • 
below the T V, leave at least 4 inches 
of space between the T V and the 
bracket.
   
  
 
 
 
 
 
 
 
 
 
Mount the Home Theater 
System
  Caution
 
Risk of personal injur y and damage to the   •
product. Allow only quali ed persons to 
mount the product.
   
 
 
1  Ensure all the required cables are...

17
   
 
 
 
 
6  Secure the bracket onto the wall with 
screws (not supplied).
   
  
 
 
 
 
7  Hook this Home Theater System  rmly 
onto the mounted bracket. Slide the 
knobs through the key holes to lock into 
position.
   
 
 
  
English
EN
Connect
 

18
   
 
 
 
Control a play source
 
 
 
 
1 Press   
 
RADIO 
,  USB 
 or  DISC 
 button to 
select the source you wish to control.
   
 
 
2  Select the desired function (for example  
 
,   
). 
 
 
 
 
 
 
 
Navigate through the menu
 
 
  
 
 
 
 
1  Point the remote control directly at the 
remote sensor on the product and select 
the desired function.
   
 
 
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
  Button  Action
 
  
  
Move up or down...

19
   
 
 
 
Start Ambisound  setup
 
 
When you turn on this Home Theater System 
for the  rst time, follow the instructions on the 
TV to complete the Ambisound setup in order 
to obtain the best possible surround sound 
effect.
  Note
 
Before you star t, ensure that you have made   •
all the required connections.
   
Complete the Ambisound setup before you 
  •
inser t a disc to play.
 
 
 
 
1 Press  DISC 
 to switch to disc mode.
 
 
 
 
2  Turn on the T V and switch it to the 
correct video-in...

20
   
  
 
 
 
 
 
 
9  Select the distance between the listening 
position and the speakers, then press  
  .
 
 
 
 
10  The speaker setting is complete, press   
 
to exit.
   
 
 
  
 
 
This Home Theater System is now ready for 
use.
  Tip
 
You can change the menu display language   •
(see ‘Adjust set tings’ > ‘Preferences’ >  [OSD 
Language] 
).
   
If you connect this Home Theater System to 
  •
HDMI CEC compliant T V using HDMI cable, 
it switches automatically to the menu display 
language as...