Philips Hts4600 User Manual

English
EN     31
Play
Play from radio 
Check if the FM antenna has been connected 
to this DVD Home Theatre unit.  If not, 
connect the supplied FM antenna to the FM 
75Ω socket and fi x its ends to the wall.
   Tips
For bet ter FM stereo reception, connec t an ex ternal 
FM antenna (not supplied).
Position the antenna as far away as possible from 
your T V, VCR or other r adiation source to prevent 
interference.•
•
First time tuning
The fi rst time when you access ‘RADIO’ mode, 
follow the instructions...

32     EN
Listen to radio 
1 Press RADIO.
2 Use the remote control to control the 
radio. 
Button Action
Select a preset radio station.
 m  MTune the radio frequency 
backward/ forward.
Press and hold this but ton to 
delete the preset station from 
the preset list.
The preset number for 
other radio stations 
remain unchanged. •
Reinstall all the radio stations
1 Press RADIO.
2 Press and hold PROGRAM until ‘START’ is 
displayed.

  All previously stored radio stations will 
be replaced.
 Note
If no...

English
EN     33
Adjust sound
6 Adjust sound
Control the volume
1 
Press  VOL +-  to increase or decrease 
the volume level.
To mute the volume, press  H.
To restore the volume, press  H again 
or press the volume button.
Select surround sound
1 Press  SURROUND  repeatedly to select a 
best surround output that available on the 
disc.
Options Descriptions
DOLBY VS
Dolby Virtual surround sound.
STEREOStereo sound.
•
•
Select a preset sound effect
1 Press  SOUND MODES  +- repeatedly 
to select a sound...

34     EN
7 Adjust settings
This section describes the various setting 
options of this unit.  
Symbol Options
[ General Setup ]
 
[ Audio Setup ]
[ Video Setup ]
[ Preferences ]
General setup
1 
Press OPTIONS.

 [ General Setup ] menu is displayed.
2 Press B.
3 Select an option, then press OK.
General Setup
Screen Saver
DivX(R) VOD Code Sleep Display DimDisc Lock
OSD Language
See the explanations of the above 
options in the following pages.
4 Select a setting, then press OK.
To return to the previous...

English
EN     35
Adjust settings
[ Sleep ]
Switch to standby automatically after the 
preset time.
[ Off ] – disable sleep mode.
[ 15, 30, 45, 60 mins ] – select the 
count down time before it switches to 
standby.
   Tips
You can direc tly access to sleep timer func tion by 
pressing SLEEP repeatedly on the remote control 
until the count down time is displayed on the display 
panel. •
[ DivX(R) VOD Code ]
Display the DivX® registration code.
   Tips
Enter this unit’s DivX registr ation code when you...

36     EN
[ HDMI Audio ]
When you connect this unit and TV with 
HDMI cable, select the audio output 
setting for this connection.
[ All ] – the sound is output through 
both your TV and this speaker system. 
If the audio format on the disc is not 
supported, it will be downmixed to 
two-channel sound (linear-PCM).  
[ Off ] – disable audio output from 
your TV. The sound is only output 
through this speaker system.
[ CD Upsampling ]
Convert the music CD to a higher 
sampling rate using sophisticated...

English
EN     37
Adjust settings
[ TV Type ]
Change this setting only if the video does 
not appear correctly.  By default, this 
setting matches the most common setting 
for TVs in your country.  
[ PAL ] – for PAL-system TV.
[ NTSC ] – for NTSC-system TV.
[ Multi ] – for TV that is compatible 
with both PAL and NTSC.
[ TV Display ]
Select the screen format according to how 
you want the picture to appear on your 
TV.  
4:3 Letter Box (LB) 4:3 Pan Scan (PS)
16:9 (Wide Screen)
[ 4:3 Pan Scan ] – for...

38     EN
[ HDMI Video ] – select a video 
resolution that is compatible with your 
TV display capability.
Options Descriptions
[ Auto ]It detects and selects the 
best supported video 
resolution automatically.
[ 480p, 576p, 
720p, 1080i, 
1080p ]Select a video resolution 
that best supported by 
your TV.  See your TVs 
manual for details.
 Note
If the set ting is not compatible with your T V, a 
blank screen appear s.  Wait for 15 seconds for auto 
recover or switch to its default mode as follows:  
1)...

English
EN     39
Adjust settings
[ Closed Caption ]
Turn on or off display captions.
[ On ] – show the sound effects in 
subtitle. Only applicable to disc with 
Closed Caption information included 
and your TV supports this feature.
[ Off ] – disable closed caption. •
•
Preferences
1 
Press OPTIONS.

 [ General Setup ] menu is displayed.
2 Press V to select  [ Preferences ], then 
press B.
3 Select an option, then press OK.
Preferences
Parental
PBC Disc Menu
Password
DivX Subtitle SubtitleAudio...

40     EN
[ Audio ]
Select the default audio language for 
DVDs.
[ Subtitle ]
Select the default subtitle language for 
DVDs.
[ Disc Menu ]
Select the menu language for DVDs.
 Note
If the language you have set is not available on the 
disc, the disc uses its own default language.
For some DVDs, the subtitle/audio language can only 
be changed from the disc menu.
To selec t the languages that are not listed in the 
menu, selec t [ Others ].  Then check the Language 
Code list at the back of this user...