Philips Hts4600 User Manual

English
EN     11
Connect
3 Connect 
This section describes the basic connections 
required for this DVD Home Theatre unit 
before it can be used.  
Basic connections:
Place the unit 
Connect video cables
Connect speakers to subwoofer
Connect subwoofer and radio antenna
Optional connections:
Connect audio cables/other devices
Connect audio from TV
Connect audio from cable box/
recorder/game console
Connect portable media player
Connect USB device
Attach table stand to DVD Home Theatre 
unit 
Mount the...

12     EN
Connect video cables
This section describes how to connect this 
DVD Home Theatre unit to your TV so to 
enable viewing of disc play.
Select the best video connection that your TV 
can support.
Option 1: Connect to HDMI socket (for a 
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to Scart socket (for a 
standard TV).
Option 3: Connect to component video 
socket (for a standard TV or Progressive 
Scan TV).
Option 4: Connect to Video (CVBS) socket 
(for a standard TV).
 Note
You must connec...

English
EN     13
Connect
Option 3: Connect to component 
video socket 
1 Connect the component video cables (not 
supplied) from the Y P
B PR sockets on this 
unit to the component video input sockets 
on your TV.
If a progressive scan TV is used, you 
may turn on the progressive scan mode 
(see chapter ‘Turn on Progressive Scan’ 
for details).
   Tips
The component video input socket on your T V may 
be labelled as Y Pb/Cb Pr/Cr or YUV. 
This type of connec tions provide good pic ture 
quality.•
•
•...

14     EN
Connect speakers to 
subwoofer
LEFT
RIGHT
1 Connect the left and right speakers to the 
matching sockets on the subwoofer.
 Note
Ensure that the front por tion of the plug is fully 
inser ted into the socket.•
Connect subwoofer and radio 
antenna
1
3 2
1 Connect the interconnect cable (supplied) 
from the TO SUBWOOFER socket on 
this unit to the TO MAIN UNIT socket on 
the subwoofer.
2 Connect the FM antenna (supplied) to the 
FM75Ω socket on this unit (for some 
models, this cable has been...

English
EN     15
Connect
Connect audio cables/other 
devices
This section describes how you can route the 
sound from other devices to this DVD Home 
Theatre unit in order to enjoy sound output or 
audio play with surround capabilities.
Connect audio from TV 
(also used for EasyLink control)
AUX IN
1   Connect an audio cable (supplied) from 
the AUX IN sockets on this unit to the 
AUDIO OUT sockets on your TV. 
 Note
To listen to the audio output from this connec tion, 
press AUX / MP3 LINK repeatedly...

16     EN
Connect portable media player
MP3 LINK
MP3
1 Connect a 3.5mm stereo audio cable 
(supplied) from the MP3 LINK socket on 
this unit to the phone socket on your 
portable media player (such as MP3 player).
 Note
To listen to the audio output from this connec tion, 
press AUX / MP3 LINK repeatedly until ‘MP3 LINK’ 
is displayed on the display panel. •
Connect USB device
1 Connect the USB device to  (USB) 
socket on this unit.
 Note
This DVD Home Theatre unit can only play/view 
MP3, WMA , DivX...

English
EN     17
Get started
Mount the DVD Home 
Theatre unit/speakers
 Caution!
Risk of per sonal injur y and damage to the unit.  
Allow only qualifi ed per sons to mount the unit.•
1 Ensure all the required cables are 
connected to this unit.
2 Drill the screw holes and insert the rubber 
wall plugs (not supplied) into the holes.  
Use the supplied mounting guide for 
accurate screw positions.
•Before you mount the speaker, remove 
its stand by pressing on the catches (A) 
and pull it out. 
A
3 Hook...

18     EN
4  Get started   
Prepare the remote control 
1 Push to open the battery compartment 
cover.
2 Insert two batteries type R03 or AAA.  
Match the indications (+-) inside the 
battery compartment.
3 Close the cover.
 Note
If you are not going to use the remote control for a 
long time, remove the bat teries.•
Control a play source
1 Select the source you wish to control by 
pressing the DISC, USB, RADIO or 
AUX /MP3 LINK button.
2 Then select the desired function (for 
example í, ë). 
Navigate...

English
EN     19
Get started
Find the correct viewing 
channel
1 
Press 2 to turn on the DVD Home 
Theatre unit.
2 Press DISC to switch to disc mode
3 Turn on the TV and switch it to the 
correct video-in channel.  
You may go to the lowest channel on 
your TV, then press the Channel Down 
button on your TVs remote control 
until you see the Video In channel.
You may press ° button repeatedly 
on your TVs remote control.
Usually this channel is between the 
lowest and highest channels and may 
be called...

20     EN
Turn on Progressive Scan
If you connect this unit to TV with the 
component video connection (see chapter 
‘Connect video cables - Option 3: Connect to 
component video socket’ for details), you can 
set the progressive scan output if your TV 
supports progressive scan.
1 Turn on the TV to the correct viewing 
channel for this unit.
2 Press DISC.
3 Press OPTIONS.
4 Press V to select  [ Video Setup ] in the 
menu, then press B.
Picture Setting
HDMI Setup TV DisplayTV Type
ProgressiveOn Off
Video...