Philips Hts3578 User Manual

21
8 Press     
 SETUP 
 to exit the menu. 
9  You can now turn on the progressive scan 
mode on the T V.
Note
  During play, when progressive scan mode is on   •
for both this Home Theater System and the 
T V, distor ted picture may display. Turn off the 
progressive scan feature on both this Home 
Theater System and the T V.
   
 
 
 
 
Turn on Progressive Scan
 
 
If the TV suppor ts progressive scan output, you 
can connect this Home Theater System and the 
TV using component video connection. (see...

22
   
 
 
2 Press   
  
 to change the volume level, 
then press  OK 
.
   
 
 
The test tone is emitted from the    »
speaker.
   
 
 
 
 
 
 
Repeat the above setting for other  • 
speakers until all the speakers output 
level sounds equally balance.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
 
  
 
 
 
 
 
To set the output delay time (center and rear 
speakers only) 
 
 
  
 
 
 
 
1 Select  [Speakers Delay] 
 in the menu, 
then press  
  .
 
 
  
 
 
 
 
2 Press   
  
 to set the delay...

23 EN
Use Philips EasyLink
 
 
Your Home Theater System suppor ts 
Philips EasyLink, which uses the HDMI CEC 
(Consumer Electronics Control) protocol. 
EasyLink-compliant devices that are connected 
through HDMI connectors can be controlled by 
a single remote control. 
Note
  Philips does not guarantee 10 0%   •
interoperability with all HDMI CEC devices.
1  Turn on the HDMI CEC operations on 
the T V and other connected devices. See 
T Vs/devices manual for details.
2  You can now enjoy the following...

24
   
For example, if the TV audio is 
connected to the  AUX1 
 jack on this 
Home Theater System, select  [Aux1] 
 
and map with the TV (brand name) at 
the right panel.
6  Select the audio input of this Home 
Theater System that is used to connect to 
other HDMI device (e.g. AUX1, AUX2), 
then press  
  . 
7  Select the correct connected device, then 
press  OK 
.
   
 
 
Repeat steps 5~7 to map other    »
connected devices.
8   Press     
 SETUP 
 to exit the menu.
   
 
 
 
 
 
 
Aux 2
Audio Input...

25
On the remote control 
   
 
 
Press   • AUDIO SOURCE 
 repeatedly to 
switch to the connected audio source:
Display  Device connected to
 
 
AUX 1 
AUDIO IN-AUX1 jacks
   
AUX 2 
AUDIO IN-AUX2 jacks
   
COA X IN 
COA XIAL DIGITAL IN jack
   
OPTI IN 
OPTICAL DIGITAL IN jack
   
MP3 LINK 
MP3 LINK jack
   
 
 
Press   • RADIO 
 to switch to FM band.
   
 
 
Press   • USB 
 to switch to USB mode.
   
 
 
Press   • DISC 
 to switch to disc mode.
Select a play source
 
 
 
On the main unit 
   
 
 
Press...

26
Play video
Note
  For video disc, playback always resumes from   •
the point where it was last stopped. To star t 
play from the beginning, press  
   while the 
message is displayed.
Control video play
1  Play a title.
2  Use the remote control to control the 
title. 
Button  Action
 
  
Star ts, pauses or resumes disc 
play.
   
 
Stops disc play.
   
 
Skips to the nex t title or chapter.
   
 
Skips to the beginning of the 
current title or chapter. Press 
twice to jump to the previous 
title or...

27
Access DVD menu
1 Press  DISC 
 to access disc main menu.
2  Select a play option, then press  OK 
.
   
 
 
In some menus, press the   • Numeric 
buttons 
 to input your selection.
   
 
 
To return to the title menu during  • 
play, press  
   
 BACK 
.
   
 
 
 
 
 
 
 
Change video play
1  Play a title.
2  Use the remote control to change the 
video play. 
Button  Action
 
 
AUDIO 
SYNC  Selects an audio language or 
channel on a disc.
   
SUBTITLE 
Selects the subtitle language on 
a disc....

28
Sync audio output with video play
   
If the video play is slower than the audio 
output (sound does not match with the 
pictures), you can delay the audio output to 
match the video.
1  Press and hold  AUDIO SYNC 
 until 
‘AUDIO SYNC’ is displayed.
2  Within  ve seconds, press  VOL +/- 
 to set 
the delay time for audio output.
Note
  If the volume control is not used within  ve   •
seconds, it resumes normal volume control 
function. 
Quick skip play to a specifi c time
1  During play, press...

29
Play DivX® video
   
DivX video is a digital media format that 
retains high quality despite a high rate of 
compression. You can enjoy DivX video on 
this DivX® Cer ti ed Home Theater System.
1  Inser t a disc or USB that contains the 
DivX videos.
2 Press  DISC 
 or  USB 
.
   
 
 
A contents menu is displayed.   »
3  Select a title to play, then press   
.
4  Use the remote control to control the 
title. 
Button  Action
 
 
AUDIO 
SYNC  Selects an audio language or 
channel.
   
SUBTITLE 
Select...

30
Play MP3/WMA music
   
MP3/ WMA is a type of highly compressed 
audio  le ( les with .mp3 or .wma extensions).
1  Inser t a disc or USB that contains the 
MP3/WMA music.
2 Press  DISC 
 or  USB 
.
   
 
 
A contents menu is displayed.   »
3  Select a folder, then press  OK 
.
4  Select a track to play, then press   
.
   
 
 
To return to the main menu, press   • 
 
 
 BACK 
 or press   
 until ‘Previous’ 
folder is selected, then press  OK 
.
Note
 
For disc recorded in multiple sessions, only the...