Philips Hts3500s User Manual

English
11
3139 115 2xxx1
Basic Connections (continued)
IMPORTANT!
–You only need to make 
one video
connection from the following
options, depending on the
capabilities of your TV.
–Connect the DVD system directly
to the TV.
–Proceed to page 19 for setting up
the TV once you have completed
the connections.
Helpful Hints:
– To hear the TV channels through this DVD
system, use the audio cables (white/red - not
supplied) to connect AUX IN sockets to the
corresponding AUDIO OUT sockets on the TV
(not...

12
3139 115 2xxx1
English
Basic Connections (continued)
IMPORTANT!
–The progressive scan video quality
is only possible when using Y Pb Pr
and a progressive scan TV is required.
–DO NOT connect both SCART
and Y Pb Pr to a TV, it may affect the
picture quality.
1Use the component video cables (red /
blue / green - not supplied) to connect the
DVD system’s Y Pb Pr sockets to the
corresponding component video input
sockets (or labelled as Y Pb/Cb Pr /Cr or
YUV) on the TV.
2To hear the TV channels through...

English
13
3139 115 2xxx1
Basic Connections (continued)
After everything is connected
properly, plug the AC power cord
into the power outlet.
The red Eco Power LED on the DVD
system will light up. Never make or
change any connections with the power
switched on.
Helpful Hint:
– Refer to the type plate on the rear of the
subwoofer for identification and supply
ratings.
Step 7: Connecting the
power cord
TV
LRPb PrY
DVD system
001-049-hts3500-01-Eng 12/27/04, 6:28 PM13
 

14
3139 115 2xxx1
English
Viewing and listening to the
playback
1Connect the VCR or Cable/Satellite Box
to the TV as shown.
2Connect the DVD system’s AUX IN
(R/L) sockets to the AUDIO OUT
sockets on the VCR or cable/satellite box.
Press AUX/DI on the remote to select
“AUX” in order to activate the input
source.
Connections to External Devices
Connecting a VCR or
Cable/Satellite Box
L
RPb PrY
24
1
~ AC MAINS
3
VIDEO
AUDIOOUT INTV
VCR or Cable/
Satellite Box
Using the VCR for recording DVD
playback
Some...

English
15
3139 115 2xxx1
Listening to the playback

Connect the DVD system’s DIGITAL
IN socket to the DIGITAL OUT socket
on a digital audio device.
Press AUX/DI on the remote to select
“DI” in order to activate the input
source.
Helpful Hints:
– Some DVDs are copy-protected.  You
cannot record the disc through a VCR or
digital recording device.
– You cannot hear or record the SACD or
MP3-CD playback if you use the digital
connection.
– For your playback through DIGITAL IN
connection, set the digital...

16
3139 115 2xxx1
English
Remote Control
* = Press and hold the button for more than two seconds.
1
2
3
4
5
6
7
8
9
0
!
1B
–Switches to Eco Power standby mode, or
turns on the system.
2VOL +-
–Adjusts the volume level.
31 2 3 4
–DISC: selects movement direction in the
menu.
–TUNER: use  3 4 to start auto searching,
use 1 2 to tune the radio frequency up/
down.
4S  /  T
–DISC: *searches backward/forward or
selects a track.
–TUNER: selects a preset radio station.
5PAUSE Å
–DISC: pauses playback.
6Source...

English
17
3139 115 2xxx1
Remote Control (continued)
* = Press and hold the button for more than two seconds.
@Numeric Keypad (0-9)
–DISC: enters a track/title number.
–TUNER: enters the preset radio station
number.
#DISC MENU
–DISC: enters or exits disc contents menu.
For VCD, selects various preview
function.
$DISPLAY
–DISC: displays the current status or disc
information.
%OK
–Confirms a selection.
^PLAYÉ
–DISC: starts playback.
&STOPÇ
–Exits an operation.
–DISC: stops playback.
–DISC: holding down...

18
3139 115 2xxx1
English
Main Unit
1STANDBY ON (B)
–Switches to Eco Power standby mode, or
turns on the system.
2Disc tray
3OPEN CLOSE 0
–Opens/Closes the disc tray.
4 ECO POWER indicator
–Lights up when in Eco Power standby
mode.
5iR
–Point the remote control towards this
sensor.
6System display panel
7VOLUME
–Adjusts the volume level.
123647
890!
5
8SOURCE
–Selects the relevant active source mode:
DISC, TUNER  (FM/MW), TV  or AUX/DI.
9ÉÅ PLAY/PAUSE
–DISC: starts/pauses playback.
–TUNER: starts preset...

English
19
3139 115 2xxx1
Getting Started
Step 1:Inserting batteries into
the remote control
1
3
2
1Open the battery compartment.
2Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3Close the cover.
CAUTION!
–Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
–Do not use old and new, or
different types of batteries in
combination.
–Batteries contain hazardous
chemical substances, so they should
be disposed of...

20
3139 115 2xxx1
EnglishSetting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system).  With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure :
1) Your TV can accept progressive signals,
a progressive scan TV is required.
2) You have connected the DVD system...