Philips Hts3378 User Manual

							31
Play from radio
   
Check if the FM antenna has been connected 
to this Home Theater System. If not, connect 
the supplied FM antenna to the  FM75  
 
 
 jack 
and fi x its ends to the wall.
 
 
 
 
 
Tip
 
For bet ter FM stereo reception, connec t an ex ternal   •FM antenna (not supplied).
   
Position the antenna as far away as possible from   •your T V, VCR or other r adiation source to prevent 
interference.
   
 
 
 
First time tuning
 
 
When you access radio mode for the fi rst 
time, follow the instructions to install the radio 
stations. 
   
 
 
1 Press  RADIO 
.
   
 
 
‘AUTO INSTALL ... PRESS PLAY’ is    »
displayed. 
   
 
 
 
 
2 Press   
.
   
 
 
All detected radio stations are stored.   »
   
 
 
Once complete, it tunes to the fi rst    »
preset radio station.
   
 
 
 
 
 
 
To stop auto tuning, press   • 
 
.
 
Note
 
This Home Theater System can store up to a   •maximum of 40 r adio stations.
   
If auto installation is not ac tivated or less than 5 r adio   •stations are stored, you will be prompted to install 
the r adio stations again.
FM (75 Ω) 
ANTENNA
Play from portable media 
player
   
Simply connect your por table media player (e.g. 
MP3 player) to this Home Theater System to 
enjoy superb sound quality from your music 
collections.
   
 
  
 
 
 
 
 
 
1  Connect a 3. 5 mm stereo audio cable 
(not supplied) from the  MP3 LINK 
 jack 
on this Home Theater System to the 
‘headphone’ jack on the por table media 
player.
   
 
 
2 Press  AUDIO SOURCE 
 repeatedly until 
‘MP3 LINK’ is displayed.
   
 
 
3  Star t play on your por table media player.
   
 
 
To stop play, press   • STOP 
 on the 
por table media player.
  Note
 
Control playback is only possible on the por table   •media player.
   
Stop play on the por table media player before you   •switch to other play media /source.
 
 
 
 
 
 
MP3
English
EN
Play
hts3276-3371-3378_98_en.indd   31hts3276-3371-3378_98_en.indd   311/14/2009   6:03:51 PM1/14/2009   6:03:51 PM
 
						

							32
   
 
 
Search and store radio stations 
individually
   
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
 /   
.
   
 
 
It star ts searching until a radio station    »
is detected.
   
 
 
 
 
3  Repeat step 2 until you tune to the radio 
station you wish to store.
   
 
 
To  fi netune the radio frequency,  • 
press  
   /   
.
 
 
 
 
 
 
4 Press  PROGRAM 
.
   
 
 
The preset station number blinks.   »
   
 
 
If no action is carried out within 20    »
seconds after the above step, it exits 
the preset mode.
   
 
 
 
 
5 Press   
 /   
 (or the  Numeric buttons 
) to 
select a preset number to store.
   
 
 
6 Press  PROGRAM 
 to confi rm.
 
 
 
 
 
 
 
Change the tuning grid
 
 
In some countries, the frequency step 
between adjacent channels in FM band is 50 
kHz or 100 kHz.
  Note
 
This feature is only applicable for cer tain regions.  • 
 
Changing the tuning grid er ases all preset r adio   •stations.
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
.
 
 
 
 
3  Press and hold   
 until ‘GRID 9’ or 
‘GRID 10’ is displayed.
   
 
 
‘GRID 9’ for 50 kHz and ‘GRID 10’ for    »
100 kHz.
   
 
 
 
Listen to radio
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Use the remote control to control the 
radio. 
  Button  Action
 
  
  
Selects a preset radio station.
   
 
  
Tunes the radio frequency up or 
down.
   
 
Press and hold this button to 
erase the current radio station 
from the preset list.
   
The preset number for other 
radio stations remain unchanged.
   
 
 
 
Reinstall all the radio stations
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Press and hold  PROGRAM 
 for more than 
5 seconds.
   
 
 
All previously stored radio stations are    »
replaced.
  Note
 
Check the r adio antenna connec tion if no stereo   •signal is detec ted or less than 5 stations are detec ted 
during r adio installation.
EN
hts3276-3371-3378_98_en.indd   32hts3276-3371-3378_98_en.indd   321/14/2009   6:03:51 PM1/14/2009   6:03:51 PM
 
						

							33
6  Select the audio track, then press  OK 
.
   
 
 
To select another track, repeat step  • 
6.
   
 
 
To select all tracks, select   • [Select 
All] 
 in the menu and press  OK 
. 
   
 
 
To deselect all tracks, select  • 
  [Deselect all] 
 in the menu and press 
  OK 
.
 
 
 
 
 
 
7 Select  [Start] 
 in the menu to conver t, 
then press  OK 
. 
   
 
 
Once complete, a new folder is    »
created automatically in the USB 
device to store all the new MP3 fi les.
   
 
 
 
 
 
 
To exit the menu, select   • [Exit] 
 and 
press  OK 
.
 
Note
 
While you conver t, do not press any but tons.   • 
 
DTS CDs and copy-protec ted CDs cannot be   •conver ted.
   
Write-protec ted or password-protec ted USB   •devices cannot be used to store MP3 fi les. 
 
 
 
 
 
 
 
 
 
 
 
6 Advanced 
features
   
 
 
Create MP3 audio fi les
 
 
You can conver t audio CDs into MP3 audio 
fi les with this Home Theater System. The 
created MP3 audio fi les are saved in your USB 
device.
  Option  Description
 
 
[Speed] 
Selects the write-to-fi le speed.
   
If  [Normal] 
 speed is selected, 
music play can be heard while 
creating the MP3 fi le.
   
[Bitrate] 
Selects the quality level. Higher 
bitrate for better sound quality 
and bigger fi le size.
   
Default setting is  [128kbps] 
.
 
 
 
 
 
 
 
 
 
 
 
1  Inser t an audio CD. (CDDA /HDCD)
 
 
 
 
2  Connect the USB fl ash drive to   
 
(USB) jack on this Home Theater System.
   
 
 
3  During disc play, press  CREATE MP3 
. 
 
 
 
 
4  Select the conversion options in the 
  [OPTIONS] 
 panel, then press  OK 
.
 
 
 
 
5 Press   
 to access the  [TRACK] 
 panel.
 
 
 
 
CREATE MP3
OPTIONSTRACK
Bitrate         128kbps
SUMMARY
Select Track     0              
Start ExitSelect All
Deselect All
Time                 00:00Track01          04:14
Track02          04:17
Track03          03:58
Track04          04:51
Track05          03:53
Track06          04:09
Track07          04:38 
Speed         Normal
English
EN
Advanced features
hts3276-3371-3378_98_en.indd   33hts3276-3371-3378_98_en.indd   331/14/2009   6:03:52 PM1/14/2009   6:03:52 PM
 
						

							34
   
 
 
 
Select a preset sound
 
 
 
 
 
 
 
1 Press  SOUND 
 repeatedly to select the 
sound effect that most suitable for the 
video or music you play.
  Video/Music   Description
 
 
ACTION 
 / 
  ROCK  Enhance low and 
high range for 
great sounding 
movie effects and 
atmosphere. Great 
for action movies and 
rock/pop music.
   
CONCERT 
/ 
  CLASSIC  Flat and pure sound 
mode. Ideal for 
listening to classical 
music and watching 
live concer t disc.
   
DRAMA 
 / 
  JAZZ  Clear mid and high 
range. Recreates the 
atmosphere of a live 
club with the ar tist 
just in front of you. 
Good for jazz music 
and watching dramas.
   
SPORTS 
Moderate mid range 
and surround effects 
for clear vocals and 
the atmosphere of a 
live spor ts venue. It 
is also ideal for video 
gaming.
   
NIGHT 
Dynamically 
controlled sound 
mode suitable 
for watching 
movies at night or 
for nonintrusive 
background music.
   
 
 
 
 
 
7 Adjust sound
 
 
 
 
Control the volume
 
 
 
 
1 Press  VOL +/- 
 to increase or decrease 
the volume.
   
 
 
To mute, press   • 
 
.
   
 
 
To restore the volume, press   • 
 
 again 
or press  VOL + 
.
 
 
 
 
 
 
 
 
 
Select surround sound
 
 
 
 
 
 
 
1 Press  SURR 
 repeatedly to select the best 
surround output that’s available on the 
disc.
   
Option   
Description
 
 
5 CH 
STEREO  Enhances the stereo channel 
output by duplicating the 
sound output to the centre 
and rear speakers. Ideal for 
par ty music.
   
MULTI-
CHANNEL/
DPLII  Multi-channel surround 
output: DTS (Digital Theatre 
Systems), Dolby Digital, and 
Dolby Pro Logic II.
   
STEREO 
Stereo sound from two front 
speakers.
EN
hts3276-3371-3378_98_en.indd   34hts3276-3371-3378_98_en.indd   341/14/2009   6:03:52 PM1/14/2009   6:03:52 PM
 
						

							35
   
 
 
 
 
 
[Mic] 
   
Turns microphone output on and off.
   
 
 
  • [On] 
 – Turns microphone on. 
   
 
 
  • [Of f ] 
 – Turns microphone off.
 
 
  
 
 
 
 
 
[Echo Level] 
   
Press  
 
  
 to set the echo level.
 
 
  
 
 
 
[Key] 
   
Press  
 
  
 to set the pitch level that matches 
your voice.
   
  
 
 
 
[Score] 
   
Selects a karaoke rating score level.
   
 
 
  • [Of f ] 
 – No score rating display. 
   
 
 
  • [Basic] 
 – Basic rating.
   
 
 
  • [Intermediate] 
 – Intermediate rating.
   
 
 
  • [Advance] 
 – Advance rating.
 
 
 
 
 
 
 
 
Turning vocals off (voice 
cancel)
   
 
 
1 Press  VOCAL 
 repeatedly until ‘ VOICE 
CANCEL’ is displayed.
  Note
 
You cannot cancel the voice output from MP3 or   •WMA audio.
 
 
 
 
 
Adjusting microphone volume 
level
   
 
 
 
 
 
 
 
 
1  Connect a microphone (not supplied) to 
the  MIC 
 socket on this Home Theater 
System. 
   
 
 
2  Turn on the microphone output. (see 
‘Karaoke settings’.)
   
 
 
3 Press  MIC 
 ( VOL +/- 
) to adjust the 
microphone volume.
   
 
 
‘MIC XX’ is displayed.   »
   
 
 
 
 
 
 
Sing or speak into the microphone to  • 
fi nd the desired volume level.
 
 
 
 
 
 
 
 
Karaoke settings
 
 
 
 
 
 
 
 
 
 
1  Turn on the T V to the correct viewing 
channel for this Home Theater System.
   
 
 
2 Press  KARAOKE 
. 
   
 
 
    »[Karaoke Setup Page] 
 menu is 
displayed.
   
 
 
 
 
3  Select an option and change the setting, 
then press  OK 
.
   
 
 
To exit the menu, press   • KARAOKE 
.
 
 
  
English
EN
Adjust sound
hts3276-3371-3378_98_en.indd   35hts3276-3371-3378_98_en.indd   351/14/2009   6:03:52 PM1/14/2009   6:03:52 PM
 
						

							36
General setup
   
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
.
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •following pages.
OSD Language
Sleep Timer Screen Saver Disc Lock EasyLink Setup
Display Dim
General Setup
DivX(R) VOD Code
   
 
 
 
 
8 Adjust settings
 
 
You can customise various kinds of settings as 
you prefer. Refer to the following instructions to 
navigate through the setup menus. 
  Symbol  Options
 
 
 
 
[General Setup]
   
 
 
[Audio Setup]
 
 
 
 
[Video Setup]
 
 
 
 
[Preferences]
 
Note
 
If the setup option is greyed out, it means the set ting   •cannot be changed in the current state.
 
 
 
 
 
EN
hts3276-3371-3378_98_en.indd   36hts3276-3371-3378_98_en.indd   361/14/2009   6:03:52 PM1/14/2009   6:03:52 PM
 
						

							37
   
 
 
 
[Disc Lock] 
   
Sets play restriction for specifi c discs. 
Before you star t, place the disc in the disc 
compar tment (maximum 40 discs can be 
locked).
   
 
 
  • [Lock] 
 – Restricts access to the current 
disc. Once activated, a password is 
needed to unlock and play the disc. 
   
 
 
  • [Unlock] 
 – Plays all discs.
 
Tip
 
You can set or change the password (see ‘Adjust   •set tings’ > ‘Preferences’ >  [Password] 
).
 
 
 
 
 
[Display Dim] 
   
Changes the brightness level of the display 
panel on this Home Theater System.
   
 
 
  • [10 0%]  
– Normal brightness.
   
 
 
  • [70%]  
– Medium brightness.
   
 
 
  • [4 0%] 
 – Dimmest display.
 
 
 
 
  
 
 
 
 
 
[OSD Language] 
   
Selects the default on-screen menu language.
 
 
  
 
 
 
 
 
[Screen Saver] 
   
Turns off or on the screen saver mode. Helps 
to protect the T V screen from being damaged 
due to over exposure to a static image for too 
long.
   
 
 
  • [On] 
 – Sets the screen saver to appear 
af ter 5 minutes of inactivity (for example, 
in pause or stop mode).
   
 
 
  • [Of f ] 
 – Disable screen saver mode.
 
 
 
 
  
 
 
 
 
 
[Sleep Timer] 
   
Switches to standby automatically af ter the 
preset time.
   
 
 
  • [15 mins] 
,  [30 mins] 
,  [45 mins] 
,  [60 mins] 
 
– Selects the count down time before 
the Home Theater System switches to 
standby.
   
 
 
  • [Of f ] 
 – Disables sleep timer mode.
 
 
 
 
  
 
 
 
 
 
[EasyLink Setup] 
   
If this Home Theater System is connected 
to HDMI CEC compliant T V/devices, all 
connected devices can respond to the 
following commands simultaneously:
  Option  Description
 
 
[EasyLink] 
Turns off or on all EasyLink 
features.
   
To disable this feature, select 
  [Of f ] 
.
   
[One 
To u c h  
Play]  When you press  PLAY 
, the 
T V and Home Theater System 
are turned on. Disc play star ts 
if there is a disc in the Home 
Theater System. 
   
To disable this feature, select 
  [Of f ] 
.
   
[One 
To u c h  
Standby]  When you press and hold 
  STANDBY 
, connected HDMI 
CEC devices simultaneously 
switch to standby. 
   
To disable this feature, select 
  [Of f ] 
.
   
[System 
Audio 
Control]  When you play audio that is 
routed from the connected 
devices, this Home Theater 
System switches to the 
corresponding audio source 
automatically.
   
To enable this feature, select 
  [On] 
. Then proceed to  [Audio 
Input Mapping] 
 to scan and map 
all the connected devices.
   
[Audio 
Input 
Mapping]  When you map the audio 
input correctly, this Home 
Theater System switches to the 
audio from the played device 
automatically.
  Note
 
You must turn on the HDMI CEC oper ations on   •the T V/devices before you can enjoy the EasyLink 
controls. See the T V/devices manual for details.
   
Philips does not guar antee 10 0% interoper ability 
  •with all HDMI CEC compliant devices.
Adjust settings
English
EN
hts3276-3371-3378_98_en.indd   37hts3276-3371-3378_98_en.indd   371/14/2009   6:03:53 PM1/14/2009   6:03:53 PM
 
						

							38
Audio setup
   
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Audio Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •following pages.
 
 
 
 
 
CD Upsampling Speakers Delay Speakers Volume
HDMI Audio
Audio Setup
Audio Sync
   
 
 
 
[DivX(R) VOD Code] 
   
Displays the DivX® registration code.
 
Tip
 
Enter this Home Theater System DivX registr ation   •code when you rent or purchase a video from w w w.
div x.com/vod. The DivX videos rented or purchased 
through the DivX® VOD ( Video On Demand) 
ser vice can be played only on the device to which it 
is registered.
   
 
 
 
 
EN
hts3276-3371-3378_98_en.indd   38hts3276-3371-3378_98_en.indd   381/14/2009   6:03:53 PM1/14/2009   6:03:53 PM
 
						

							39
   
 
 
 
[CD Upsampling] 
   
Conver ts the music CD to a higher sampling 
rate using sophisticated digital signal 
processing for better sound quality. 
   
 
 
  • [Of f ] 
 – Disables CD-upsampling.
   
 
 
  • [88.2kHz (X2)] 
 – Conver ts the sampling 
rate of the CDs twice as high as the 
original rate. 
  Note
 
CD upsampling is only available in stereo mode.  •
 
 
 
 
 
[Audio Sync] 
   
Sets the default delay time for audio output 
when you play a video disc.
  1) To star t, press  OK 
.
   
2) Select a speaker delay in the menu, then 
press  
   to set the delay time.
   
3) Press  OK 
 to confi rm and exit. [Speakers Volume] 
   
Sets the volume level of each speaker to get 
the ideal audio balance.
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 to adjust the volume level.
   
3) Press  OK 
 to confi rm and exit.
 
Note
 
The test tone is emit ted from the speaker which you   •adjust.
 
 
 
 
 
[Speakers Delay] 
   
Sets the delay time for the centre and rear 
speakers if they are placed closer to the 
listening position, so that the sound output 
from all speakers reaches the listening position 
at the same time. 
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 to set the delay time.
   
3) Press  OK 
 to confi rm and exit.
 
Note
 
Allow 1ms set ting for ever y 1 foot distance between   •the speaker and the listening position.
 
 
 
 
 
[HDMI Audio] 
   
Selects the HDMI audio setting when you 
connect this Home Theater System and the 
T V with a HDMI cable.
   
 
 
  • [On] 
 – Allows audio output through the 
T V and the speaker system. If the audio 
format on the disc is not suppor ted, it 
will be downmixed to two-channel sound 
(linear-PCM). 
   
 
 
  • [Of f ] 
 – Disables audio output from the 
T V. The sound is only output through the 
speaker system.
   
 
 
  
Adjust settings
English
EN
hts3276-3371-3378_98_en.indd   39hts3276-3371-3378_98_en.indd   391/14/2009   6:03:53 PM1/14/2009   6:03:53 PM
 
						

							40
[TV Display] 
   
Selects one of the following display formats:
 
 
 
 
 
 
 
  • [4:3 Pan Scan] 
 – For 4:3 screen T V: full-
height display with the trimmed sides.
   
 
 
  • [4:3 Let ter Box] 
 – For 4:3 screen T V: 
wide-screen display with black bars on 
the top and bottom of the screen.
   
 
 
  • [16:9 Wide Screen] 
 – For wide-screen 
T V: display ratio 16:9.
   
 
 
  
 
 
 
 
 
[Screen Fit] 
   
Fits the picture format to the T V screen to 
enjoy watching disc play in full screen mode.
   
 
 
  • [Select] 
 – Displays various types of full 
screen format, press  OK 
 to select a 
suitable picture format that best fi ts to 
the T V screen.
   
 
 
  • [Of f ] 
 – Returns to normal screen display.
 
 
 
 
  
 
 
 
 
 
[Picture Setting] 
   
Selects a predefi ned set of picture colour 
settings or customises the personal setting.
   
 
 
  • [Standard] 
 – Original colour set ting.
   
 
 
  • [Bright] 
 – Vibrant colour set ting.
   
 
 
  • [Soft] 
 – Warm colour set ting.
   
 
 
  • [Personal] 
 – Customises the colour 
setting. Set the level of brightness, 
contrast, sharpness/tint and colour 
saturation, then press  OK 
.
 
 
 
 
  
 
 
 
 
 
4:3 Letter Box (LB) 4:3 Pan Scan (PS)
16:9 (Wide Screen)
   
 
 
 
 
Video setup
 
 
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Video Setup] 
, then 
press  
  .
 
 
 
 
3  Select an option, then press  OK 
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •following pages.
 
 
 
 
 
[TV System] 
   
Change this setting if the video does not 
appear correctly. By default, this set ting 
matches the most common setting for T Vs in 
your country.
   
 
 
  • [PAL] 
 – For PAL-system T V.
   
 
 
  • [NTSC] 
 – For NTSC-system T V.
   
 
 
  • [Multi] 
 – For T V that is compatible with 
both PAL and NTSC .
   
 
 
  
 
 
 
 
 
Video Setup
Picture Setting
Closed Caption
Progressive HDMI Setup TV Display TV System
Screen Fit
EN
hts3276-3371-3378_98_en.indd   40hts3276-3371-3378_98_en.indd   401/14/2009   6:03:53 PM1/14/2009   6:03:53 PM