Philips Hts3377 User Manual

							32
Play from radio
   
Check if the FM antenna has been connected 
to this Home Theater System. If not, connect 
the supplied FM antenna to the  FM75  
 
 
 jack 
and  x its ends to the wall.
   
 
  
 
Tip
 
For better FM stereo reception, connect an external   •
FM antenna (not supplied).
   
Position the antenna as far away as possible from 
  •
your TV, VCR or other radiation source to prevent 
interference.
   
 
 
 
First time tuning
 
 
When you access to radio mode for the  rst 
time, follow the instructions to install the radio 
stations. 
   
 
 
1 Press  RADIO 
.
   
 
 
’AUTO INSTALL ... PRESS PLAY’ is    »
displayed. 
   
 
 
 
 
2 Press   
.
   
 
 
All detected radio stations are stored.   »
   
 
 
Once complete, it tunes to the  rst    »
preset radio station.
   
 
 
 
 
 
 
To stop auto tuning, press   • 
 
.
 
Note
 
This Home Theater System can store up to a maximum   •
of 40 radio stations.
   
If auto installation is not activated or less than 5 radio 
  •
stations are stored, you will be prompted to install the 
radio stations again.
   
 
 
 
FM (75 Ω) 
ANTENNA
Play from portable media 
player
   
Simply connect your por table media player (e.g. 
MP3 player) to this Home Theater System to 
enjoy superb sound quality from your music 
collections.
   
 
  
 
 
 
 
 
 
1  Connect a 3.5mm stereo audio cable (not 
supplied) from the  MP3 LINK 
 jack on this 
Home Theater System to the ‘headphone’ 
jack on the por table media player.
   
 
 
2 Press  AUDIO SOURCE 
 repeatedly until 
‘MP3 LINK’ is displayed.
   
 
 
3  Star t play on your por table media player.
   
 
 
To stop play, press   • STOP 
 on the 
por table media player.
  Note
 
Control playback is only possible on the por table media   •
player.
   
Stop play on the por table media player before you 
  •
switch to other play media/source.
 
 
 
 
 
 
MP3
EN
 
						

							33
   
 
 
 
Search and store radio stations 
individually
   
 
 
1 Press  RADIO 
.
 
 
 
 
2 Press   
 /   
.
   
 
 
It star ts searching until a radio station    »
is detected.
   
 
 
 
 
3  Repeat step 2 until you tune to the radio 
station you wish to store.
   
 
 
To  netune the radio frequency, press  • 
 
   /   
.
 
 
 
 
 
 
4 Press  PROGRAM 
.
   
 
 
The preset station number blinks.   »
   
 
 
If no action is carried out within 20    »
seconds after the above step, it exits 
the preset mode.
   
 
 
 
 
5 Press   
 /  
 (or the  Numeric buttons 
) to 
select a preset number to store.
   
 
 
6 Press  PROGRAM 
 to con rm.
Listen to radio
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Use the remote control to control the 
radio. 
  Button  Action
 
  
  
Selects a preset radio station.
   
 
  
Tunes the radio frequency up or 
down.
   
 
Press and hold this button to erase 
the current radio station from the 
preset list.
   
The preset number for other radio 
stations remain unchanged.
   
 
 
 
Reinstall all the radio stations
 
 
 
 
1 Press  RADIO 
.
 
 
 
 
2  Press and hold  PROGRAM 
 for more than 
5 seconds.
   
 
 
All previously stored radio stations are    »
replaced.
  Note
 
Check the radio antenna connection if no stereo signal   •
is detected or less than 5 stations are detected during 
radio installation.
EN
Play
English
 
						

							34
4  Select the conversion options in the 
  [OPTIONS] 
 panel, then press  OK 
.
 
 
 
 
5 Press   
 to access the  [TRACK] 
 panel.
 
 
 
 
6  Select the audio track, then press  OK 
.
   
 
 
To select another track, repeat step 6. • 
   
 
 
To select all tracks, select   • [Select All] 
 
in the menu and press  OK 
. 
   
 
 
To deselect all tracks, select   • [Deselect 
all] 
 in the menu and press  OK 
.
 
 
 
 
 
 
7 Select  [Start] 
 in the menu to conver t, then 
press  OK 
. 
   
 
 
Once complete, a new folder is    »
created automatically in the USB 
device to store all the new MP3  les.
   
 
 
 
 
 
 
To exit the menu, select   • [Exit] 
 and 
press  OK 
.
 
Note
 
While you conver t, do not press any buttons.   •
 
 
DTS CDs and copy-protected CDs cannot be   •
conver ted.
   
Write-protected or password-protected USB devices 
  •
cannot be used to store MP3  les. 
 
 
 
 
 
 
 
 
 
6 Advanced 
features
   
 
 
Create MP3 audio  les
 
 
You can conver t audio CDs into MP3 audio 
 les with this Home Theater System. The 
created MP3 audio  les are saved in your USB 
device.
  Option  Description
 
 
[Speed] 
Selects the write-to- le speed.
   
If  [Normal] 
 speed is selected, 
music play can be heard while 
creating the MP3  le.
   
[Bitrate] 
Selects the quality level. Higher 
bitrate for better sound quality 
and bigger  le size.
   
Default setting is  [128kbps] 
.
 
 
 
 
  
 
 
 
 
 
 
1  Inser t an audio CD. (CDDA/HDCD)
 
 
 
 
2  Connect the USB  ash drive to   
 (USB) 
jack on this Home Theater System.
   
 
 
3  During disc play, press  CREATE MP3 
. 
 
 
 
 
CREATE MP3
OPTIONSTRACK
Bitrate         128kbps
SUMMARY
Select Track     0
              
Start ExitSelect All
Deselect All
Time                 00:00Track01          04:14
Track02          04:17
Track03          03:58
Track04          04:51
Track05          03:53
Track06          04:09
Track07          04:38 
Speed         Normal
EN
 
						

							35
Select a preset sound
   
 
 
 
 
 
1 Press  SOUND 
 repeatedly to select the 
sound effect that most suitable for the 
video or music you play.
  Video/Music   Description
 
 
ACTION 
 / 
  ROCK  Enhance low and high 
range for great sounding 
movie effects and 
atmosphere. Great for 
action movies and rock/
pop music.
   
CONCERT 
 
 
/ 
  CLASSIC  Flat and pure sound 
mode. Ideal for listening 
to classical music and 
watching live concer t disc.
   
DRAMA 
 / 
  JAZZ  Clear mid and high range. 
Recreates the atmosphere 
of a live club with the 
ar tist just in front of you. 
Good for jazz music and 
watching dramas.
   
SPORTS 
Moderate mid range and 
surround effects for clear 
vocals and the atmosphere 
of a live spor ts venue. It is 
also ideal for video gaming.
   
NIGHT 
Dynamically controlled 
sound mode suitable 
for watching movies at 
night or for nonintrusive 
background music.
   
 
 
 
 
 
7 Adjust sound
 
 
 
 
Control the volume
 
 
 
 
1 Press  VOL +/- 
 to increase or decrease the 
volume.
   
 
 
To mute, press   • 
 
.
   
 
 
To restore the volume, press   • 
 
 again 
or press  VOL + 
.
 
 
 
 
 
 
 
 
 
Select surround sound
 
 
 
 
 
 
 
1 Press  SURR 
 repeatedly to select the best 
surround output that’s available on the disc.
   
Option   
Description
 
 
5 CH 
STEREO  Enhances the stereo channel 
output by duplicating the 
sound output to the center 
and rear speakers. Ideal for 
par ty music.
   
MULTI-
CHANNEL/
DPLII  Multi-channel surround output: 
DTS (Digital Theater Systems), 
Dolby Digital, and Dolby Pro 
Logic II.
   
STEREO 
Stereo sound from two front 
speakers.
   
 
 
 
Adjust sound
English
EN
 
						

							36
   
 
 
 
 
 
[Mic] 
   
Turns on or off microphone output.
   
 
 
  • [On] 
 – Turns on microphone. 
   
 
 
  • [Off] 
 – Turns off microphone.
 
 
  
 
 
 
 
 
[Echo Level] 
   
Press  
 
  
 to set the echo level.
 
 
  
 
 
 
[Key] 
   
Press  
 
  
 to set the pitch level that matches 
your voice.
   
  
 
 
 
[Score] 
   
Selects a karaoke rating score level.
   
 
 
  • [Off] 
 – No score rating display. 
   
 
 
  • [Basic] 
 – Basic rating.
   
 
 
  • [Intermediate] 
 – Intermediate rating.
   
 
 
  • [Advance] 
 – Advance rating.
 
 
 
 
 
 
 
 
Turn off vocal (cancel voice)
 
 
 
 
1 Press  VOC AL 
 repeatedly until ‘VOICE 
CANCEL’ is displayed.
  Note
 
You cannot cancel the voice output from MP3 or WMA   •
audio.
 
 
 
 
 
Adjust microphone volume 
level
   
 
  
 
 
 
 
 
 
1  Connect a microphone (not supplied) to 
  MIC 
 jack on this Home Theater System. 
 
 
 
 
2  Turn on the microphone output. (see 
‘Karaoke settings’.)
   
 
 
3 Press  MIC 
 ( VOL +/- 
) to adjust the 
microphone volume.
   
 
 
‘MIC XX’ is displayed.   »
   
 
 
 
 
 
 
Sing or speak through the microphone  • 
to  nd the desired volume level.
   
 
 
 
 
 
 
Karaoke settings
 
 
 
 
 
 
 
 
 
 
1  Turn on the TV to the correct viewing 
channel for this Home Theater System.
   
 
 
2 Press  KARAOKE 
. 
   
 
 
    »[Karaoke Setup Page] 
 menu is 
displayed.
   
 
 
 
 
3  Select an option and change the setting, 
then press  OK 
.
   
 
 
To exit the menu, press   • KARAOKE 
.
 
 
  
EN
 
						

							37
General setup
   
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
.
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu, press  • 
 
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •
following pages.
OSD Language
Sleep Timer Screen Saver Disc Lock EasyLink Setup
Display Dim
General Setup
DivX(R) VOD Code
   
 
 
 
 
8 Adjust settings
 
 
You can customize various kinds of settings as 
you prefer. Refer to the following instructions to 
navigate through the setup menus. 
  Symbol  Options
 
 
 
 
[General Setup]
   
 
 
[Audio Setup]
   
 
 
[Video Setup]
   
 
 
[Preferences]
  Note
 
If the setup option is grayed out, it means the setting   •
cannot be changed at the current state.
 
 
 
 
 
Adjust settings
English
EN
 
						

							38
[Disc Lock] 
   
Sets play restriction for a speci c discs. 
Before you star t, place the disc in the disc 
compar tment (maximum 40 discs can be 
locked).
   
 
 
  • [Lock] 
 – Restricts access to the current 
disc. Once activated, a password is needed 
to unlock and play the disc. 
   
 
 
  • [Unlock] 
 – Plays all discs.
 
Tip
 
You can set or change the password (see ‘Adjust   •
settings’ > ‘Preferences’ >  [Password] 
).
 
 
 
 
 
[Display Dim] 
   
Changes the brightness level of the display 
panel on this Home Theater System.
   
 
 
  • [100%]  
– Normal brightness.
   
 
 
  • [70%]  
– Medium brightness.
   
 
 
  • [40%] 
 – Dimmest display.
 
 
 
 
  
 
 
 
 
 
[OSD Language] 
   
Selects the default on-screen menu language.
 
 
  
 
 
 
 
 
[EasyLink Setup] 
   
If this Home Theater System is connected 
to HDMI CEC compliant TV/devices, all 
connected devices can respond to the following 
commands simultaneously:
  Option  Description
 
 
[EasyLink] 
Turns off or on all EasyLink 
features.
   
To disable this feature, select  [Off] 
.
   
[One 
Touch 
Play]  When you press  PLAY 
, the TV and 
Home Theater System are turned 
on. Disc play star ts if there is a disc 
in the Home Theater System. 
   
To disable this feature, select  [Off] 
.
   
[One 
Touch 
Standby]  If you press and hold STANDBY 
for at least 3 seconds, the Home 
Theatre System and all the HDMI 
CEC devices switch to standby 
simultaneously. 
   
To disable this feature, select  [Off] 
.
   
[System 
Audio 
Control]  When you play audio that is 
routed from the connected 
devices, this Home Theater System 
switches to the corresponding 
audio source automatically.
   
To enable this feature, select  [On] 
. 
Then proceed to  [Audio Input 
Mapping] 
 to scan and map all the 
connected devices.
   
[Audio 
Input 
Mapping]  When you map the audio input 
correctly, this Home Theater 
System switches to the audio from 
the played device automatically.
  Note
 
You must turn on the HDMI CEC operations on the   •
TV/devices before you can enjoy the EasyLink controls. 
See the TV/devices manual for details.
   
Philips does not guarantee 100% interoperability with 
  •
all HDMI CEC compliant devices.
 
 
 
 
 
EN
 
						

							39
Audio setup
   
 
 
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Audio Setup] 
, then press 
 
  .
 
 
 
 
3  Select an option, then press  OK 
.
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu, press  • 
 
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •
following pages.
 
 
 
 
 
[Speakers Volume] 
   
Sets the volume level of each speaker to get 
the ideal audio balance.
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 
to adjust the volume level.
   
3) Press  OK 
 to con rm and exit.
 
Note
 
The test tone is emitted from the speaker which you   •
adjust.
 
 
 
 
 
CD Upsampling Speakers Delay Speakers Volume
HDMI Audio
Audio Setup
Audio Sync
   
 
 
 
[Screen Saver] 
   
Turns off or on the screen saver mode. Helps to 
protect the TV screen from being damaged due 
to over exposure to a static image for too long.
   
 
 
  • [On] 
 – Sets the screen saver to appear 
after 5 minutes of inactivity (for example, in 
pause or stop mode).
   
 
 
  • [Off] 
 – Disable screen saver mode.
 
 
 
 
  
 
 
 
 
 
[Sleep Timer] 
   
Switches to standby automatically after the 
preset time.
   
 
 
  • [15 mins] 
,  [30 mins] 
,  [45 mins] 
,  [60 mins] 
 
– Selects the count down time before the 
Home Theater System switches to standby.
   
 
 
  • [Off] 
 – Disables sleep timer mode.
 
 
 
 
  
 
 
 
 
 
[DivX(R) VOD  Code] 
   
Displays the DivX® registration code.
 
Tip
 
Enter this Home Theater System DivX registration   •
code when you rent or purchase video from www.
divx.com/vod. The DivX videos rented or purchased 
through the DivX® VOD (Video On Demand) 
ser vice can be played only on the device to which it is 
registered.
   
 
 
 
 
Adjust settings
English
EN
 
						

							40
   
 
 
 
[CD Upsampling] 
   
Conver ts the music CD to a higher sampling 
rate using sophisticated digital signal processing 
for better sound quality. 
   
 
 
  • [Off] 
 – Disables CD-upsampling.
   
 
 
  • [88.2kHz (X2)] 
 – Conver ts the sampling 
rate of the CDs twice as high as the 
original rate. 
  Note
 
CD upsampling is only available in stereo mode.  •
 
 
 
 
 
[Audio Sync] 
   
Sets the default delay time for audio output 
when you play a video disc.
  1) To star t, press  OK 
.
   
2) Select a speaker delay in the menu, then 
press  
   to set the delay time.
   
3) Press  OK 
 to con rm and exit.
   
 
 
 
  [Speakers Delay] 
   
Sets the delay time for the center and rear 
speakers if they are placed closer to the 
listening position, so that the sound output from 
all speakers reach the listening position at the 
same time. 
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 
to set the delay time.
   
3) Press  OK 
 to con rm and exit.
 
Note
 
Allow 1ms setting for ever y 1 foot distance between   •
the speaker and the listening position.
 
 
 
 
 
[HDMI Audio] 
   
Selects the HDMI audio setting when you 
connect this Home Theater System and the TV 
with a HDMI cable.
   
 
 
  • [On] 
 – Allows audio output through the 
TV and the speaker system. If the audio 
format on the disc is not suppor ted, it 
will be downmixed to two-channel sound 
(linear-PCM). 
   
 
 
  • [Off] 
 – Disables audio output from the 
TV. The sound is only output through the 
speaker system.
   
 
 
  
EN
 
						

							41
[TV Display] 
   
Selects one of the following display formats:
 
 
 
 
 
 
 
  • [4:3 Pan Scan] 
 – For 4:3 screen TV: full-
height display with the trimmed sides.
   
 
 
  • [4:3 Letter Box] 
 – For 4:3 screen TV: 
wide-screen display with black bars on the 
top and bottom of the screen.
   
 
 
  • [16:9 Wide  Screen] 
 – For wide-screen TV: 
display ratio 16:9.
   
 
 
  
 
 
 
 
 
[Screen Fit] 
   
Fits the picture format to the TV screen to 
enjoy watching disc play in full screen mode.
   
 
 
  • [Select] 
 – Displays various types of full 
screen format, press  OK 
 to select a 
suitable picture format that best  ts to the 
TV screen.
   
 
 
  • [Off] 
 – Returns to normal screen display.
 
 
 
 
  
 
 
 
 
 
[Picture Setting] 
   
Selects a prede ned set of picture color settings 
or customize the personal setting.
   
 
 
  • [Standard] 
 – Original color setting.
   
 
 
  • [Bright] 
 – Vibrant color setting.
   
 
 
  • [Soft] 
 – Warm color setting.
   
 
 
  • [Personal] 
 – Customizes the color setting. 
Set the level of brightness, contrast, 
sharpness/tint and color saturation, then 
press  OK 
.
 
 
 
 
  
4:3 Letter Box (LB) 4:3 Pan Scan (PS)
16:9 (Wide Screen)
Video setup
   
 
  
 
 
 
 
 
 
1 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
2 Press   
 to select  [Video Setup] 
, then press 
 
  .
 
 
 
 
3  Select an option, then press  OK 
 
 
 
 
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu, press  • 
 
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
Note
 
See the explanations of the above options in the   •
following pages.
 
 
 
 
 
[TV System] 
   
Change this setting if the video does not appear 
correctly. By default, this setting matches the 
most common setting for TVs in your countr y.
   
 
 
  • [PAL] 
 – For PAL-system TV.
   
 
 
  • [NTSC] 
 – For NTSC-system TV.
   
 
 
  • [Multi] 
 – For TV that is compatible with 
both PAL and NTSC .
   
 
 
  
 
 
 
 
 
Video Setup
Picture Setting
Closed Caption
Progressive HDMI Setup TV Display TV System
Screen Fit
EN
Adjust settings
English