Philips Hts335w User Manual

11
English
Remote Control (c o n t i n u e d )
n DISC MENU
–  For DVD, enters or exits disc contents 
menu.
–  For VCD/SVCD, enters digest menu.
o OK
– Confi rms an entry or selection.
p v V b  B
–  DISC: selects movement direction in the 
menu.
–  DISC: press left or right for fast forward 
and backward search.
–  RADIO: press up or down to tune the 
radio frequency.
–  RADIO: press left or right to start auto 
search.
q TITLE 2
–  For DVD, go back to the previous menu.
–  For VCD version 2.0 only;...

12
English
Remote Control (c o n t i n u e d )
Using the remote control
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
D  Point the remote control directly at the 
remote sensor (iR) on the front panel.
E Select the source you wish to control by 
pressing the DISC/USB, RADIO, TV, 
AUX/DI or MP3 LINE-IN button on the 
remote control.
F Then select the desired function (for 
example í, ë). CAUTION!
–  Remove...

13
English
Basic Connections
Step 1:  Placing the speakers
The Philips Home Theatre System is 
simple to install. However, proper system 
placement is critical to ensure an 
optimum sound experience.
A Place the front left and right speakers at 
equal distances from the TV and at an 
angle of approximately 45 degrees from 
the listening position.
B Place the centre speaker above the TV or 
the main unit such that the centre 
channel’s sound is localised.
C Place the rear speakers at normal 
listening ear...

14
English
Step 2:  Connecting the 
wireless transmitter
z Connect the wireless transmitter to the 
WIRELESS TRANSMITTER socket 
at the rear of the main unit.
Note:
To remove the wireless transmitter from 
the main unit, press at the sides and pull 
out.
Step 3:  Connecting the rear 
speakers to wireless 
receiver
z Connect the REAR LEFT and REAR 
RIGHT speaker cables to the matching 
sockets at the bottom of the wireless 
receiver.
AUDIO IN
WIRELESS
TRANSMITTER
WIRELESS
TRANSMITTER
REAR 
LEFTREAR...

15
English
Step 4:  Connecting subwoofer, 
front and centre 
speakers
z Connect the rest of the speakers and 
subwoofer to the matching sockets at the 
rear of the main unit, Make sure that the 
colours of the plugs and sockets are 
matched.
Helpful Hint:
–  To prevent unwanted noise, never place 
the speakers too close to the main unit, 
subwoofer, AC power adapter, TV or any 
other radiation sources.
Basic Connections (c o n t i n u e d )
AUDIO IN
WIRELESS
TRANSMITTER
SUBWOOFER FRONT CENTRE FRONT 
LEFT...

16
English
AUDIO IN
WIRELESS
TRANSMITTER
Step 5: Connecting to TV
This connection enables you to view the 
video playback from this unit. You only 
need to choose one of the options 
below to make the video connection.
–  For a standard TV, follow option 1 or 
2 or 3.
–  For a progressive scan TV, follow 
option 4.
–  For a HDMI TV, follow option 5.
Helpful Hint:
–  It is important to connect this unit directly 
to the TV in order to enjoy optimum video 
quality.
Option 1: Using the Scart socket
z...

17
English
AUDIO IN
WIRELESS
TRANSMITTER
Basic Connections (c o n t i n u e d )
Option 4: Connecting to a 
Progressive Scan TV or component 
video input
The progressive scan video quality is 
only available when using Y Pb Pr 
connection and a progressive scan TV is 
required. It provides superior picture 
quality when watching DVD movies.
A Connect the component video cables 
(red/ blue/green - not supplied) from the 
Y Pb Pr sockets on the main unit to the 
corresponding component video input 
sockets...

18
English
AUDIO IN
WIRELESS
TRANSMITTER
1
2
Step 7:  Connecting the 
power cord
After everything is connected 
properly, connect the AC power 
cord into the power outlet.
The standby LED on the main unit lights 
up. 
The wireless indicator “ 
 “ on the 
wireless transmitter and receiver light up.
Note:
Turning off to standby mode does not 
disconnect the unit from mains.
Helpful Hints:
–  Refer to the type plate at the rear or 
bottom of the product for identifi cation and 
supply ratings.
–  Before...

19
English
RFS-VIDEOOUTINAUDIO
R             L VIDEOTO TV
ANTENNA-INTV-OUT~MAINS
TO TV - I/OEXT1AUX - I/OEXT2
AUDIO IN
WIRELESS
TRANSMITTER
EXT 1 EXT 2
AUDIO IN
AUX L
R
CB
A A
Optional Connections
Connecting to cable box/
satellite receiver and 
recorder/VCR
You can connect the audio output from 
an analogue audio/video device (e.g. VCR, 
Cable/Satellite Box or TV) to this Home 
Theatre Audio System in order to enjoy 
the multi-channel surround sound 
capabilities  
Note:
The above illustration is only...

20
EnglishFinding the correct viewing 
channel
A Press SOURCE button on the main unit 
until ‘DISC’ appears on the display panel 
(or DISC/USB on the remote control).
B Turn on the TV and switch it to the 
correct video-in channel.