Philips Hts3270 User Manual
Here you can view all the pages of manual Philips Hts3270 User Manual. The Philips manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 31
31 Play from USB device This Home Theater System plays/views MP3, WMA, DivX (Ultra) or JPEG les on the following USB devices: digital camera that complies with the PTP • standard ash drive • memory card reader • HDD (ex ternal power source needed) • 1 Connect a USB device to the (USB) jack. 2 Press USB . A contents menu is displayed. » 3 Select a le to play, then press...
Page 32
32 Play from radio Check if the FM antenna has been connected to this Home Theater System. If not, connect the supplied FM antenna to the FM75 jack and x its ends to the wall. Tip For bet ter FM stereo reception, connec t an ex ternal • FM antenna (not supplied). Position the antenna as far away as possible from • your T V, VCR or other r adiation source to prevent interference. First time tuning When you access to radio mode for the rst time,...
Page 33
33 Search and store radio stations individually 1 Press RADIO . 2 Press / . It star ts searching until a radio station » is detected. 3 Repeat step 2 until you tune to the radio station you wish to store. To netune the radio frequency, • press / . 4 Press PROGRAM . The preset station number blinks. » If no action is carried out within 20 » seconds after the above step, it exits the preset mode....
Page 34
34 6 Select the audio track, then press OK . To select another track, repeat step • 6. To select all tracks, select • [Select All] in the menu and press OK . To deselect all tracks, select • [Deselect all] in the menu and press OK . 7 Select [Start] in the menu to conver t, then press OK . Once complete, a new folder is » created automatically in the USB device to store all the new MP3 les. To exit the menu,...
Page 35
35 Select a preset sound 1 Press SOUND repeatedly to select the sound effect that most suitable for the video or music you play. Video/Music Description ACTION / ROCK Enhance low and high range for great sounding movie effects and atmosphere. Great for action movies and rock/pop music. CONCERT / CLASSIC Flat and pure sound mode. Ideal for listening to classical music and watching live concer t disc. DRAMA / JAZZ Clear mid and...
Page 36
36 General setup 1 Press SETUP . »[General Setup] menu is displayed. 2 Press . 3 Select an option, then press OK . 4 Select a setting, then press OK . To return to the previous menu, • press BACK . To exit the menu, press • SETUP . Note See the explanations of the above options in the • following pages. OSD Language Sleep Timer Screen Saver Disc Lock EasyLink Setup Display Dim...
Page 37
37 [Disc Lock] Sets play restriction for a speci c discs. Before you star t, place the disc in the disc compar tment (maximum 40 discs can be locked). • [Lock] – Restricts access to the current disc. Once activated, a password is needed to unlock and play the disc. • [Unlock] – Plays all discs. Tip You can set or change the password (see ‘Adjust • set tings’ > ‘Preferences’ > [Password] ). [Display Dim] Changes the brightness level of...
Page 38
38 Audio setup 1 Press SETUP . »[General Setup] menu is displayed. 2 Press to select [Audio Setup] , then press . 3 Select an option, then press OK . 4 Select a setting, then press OK . To return to the previous menu, • press BACK . To exit the menu, press • SETUP . Note See the explanations of the above options in the • following pages. CD Upsampling Speakers Delay...
Page 39
39 [CD Upsampling] Conver ts the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. • [Of f ] – Disables CD-upsampling. • [88.2kHz (X2)] – Conver ts the sampling rate of the CDs twice as high as the original rate. Note CD upsampling is only available in stereo mode. • [Audio Sync] Sets the default delay time for audio output when you play a video disc. 1) To star t, press OK . 2) Select...
Page 40
40 [TV System] Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for T Vs in your country. • [PAL] – For PAL-system T V. • [NTSC] – For NTSC-system T V. • [Multi] – For T V that is compatible with both PAL and NTSC . [TV Display] Selects one of the following display formats: • [4:3 Pan Scan] – For 4:3 screen T V: full- height display with...