Philips Hts3180 User Manual

11
Connect audio cables/other 
devices
Route the audio from other devices to this 
Home Theater System to enjoy audio play with 
multi-channel surround capabilities.
Connect audio from TV
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX1 jacks on this 
Home Theater System and the AUDIO 
output jacks on the T V. 
Note
To listen to the audio output from this 
connection, press  AUDIO SOURCE
repeatedly until ‘AUX1’ is displayed on the 
display panel.
AUDIO OUT
AUX 1
AUDIO IN
Connect radio...

12
Connect USB device
1  Connect the USB device to  USB jack 
on this Home Theater System.
Note
This Home Theater System can only play/view 
MP3, WMA, DivX (Ultra) or JPEG  les that are 
stored on such devices.
Press  
USB to access the content and play the 
 les.
Connect power cord
Warning
Risk of product damage! Ensure that the 
power supply voltage corresponds to the 
voltage printed on the back or the underside 
of the product.
1  Connect the power cord to the power 
outlet when all the required...

13
Navigate through the menu
1  Point the remote control directly at the 
remote sensor on the product and select 
the desired function.
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
Button  Action
Move up or down
Move lef t or right
OKCon rm a selection
Enter numbers
Find the correct viewing 
channel
1 Press   to turn on this product.
2 Press  DISC to switch to disc mode.
3  Turn on the T V and switch to the correct 
video-in channel in one of the...

14
Change speaker settings
Ideally, the distance between listening position 
and all the speakers should be the same. If not, 
change the speaker settings based on their 
distance from the listening position to obtain 
the best possible surround sound.
1 Press  DISC.
2 Press   SETUP.
3 Press   to select  [Audio Setup] in the 
menu, then press  
.
If the speaker setup option is not  
accessible, press 
 twice before you 
press  
 SETUP.
To set the speakers level
1 Select  [Speakers Volume] in the menu,...

15
Select a play source
On the main unit
Press   SOURCE button repeatedly to 
select:  DISC >USB >FM >AUX 1 > 
AUX 2 >SCART IN >DISC ... 
On the remote control
Press   AUDIO SOURCE repeatedly to 
switch to the connected audio source.
Display  Device connected to
SCART INSCART TO T V jack
AUX 1AUDIO IN-AUX 1 jacks
AUX 2AUDIO IN-AUX 2 jacks
Press   RADIO to switch to FM band.
Press   USB to switch to USB mode.
Press   DISC to switch to disc mode.
Repeat the above setting for other  
speakers until all the...

16
Play video
Note
For video disc, playback always resumes from 
the point where it was last stopped. To star t 
play from the beginning, press  
 while the 
message is displayed.
Control video play
1  Play a title.
2  Use the remote control to control the 
title. 
Button  Action
Star ts, pauses or resumes 
playback.
Stops play.
Skips to the nex t title or chapter.
Skips to the beginning of the 
current title or chapter. Press 
twice to jump to the previous 
title or chapter.
 /Searches fast-for ward...

17
Access DVD menu
1 Press  DISC to access disc main menu.
2  Select a play option, then press  OK.
In some menus, press the   Numeric 
buttons to input your selection.
To return to the title menu during  
play, press  
 BACK.
Access VCD menu or preview menu
The PBC (Playback Control) for VCD is 
activated by default in the factor y. When you 
load in a VCD, the contents menu is displayed. 
1 Press   or the  Numeric buttons to 
select a play option, then press  OK to 
star t play.
If PBC is off, it skips...

18
Repeat play a speci c section
1  During play, press  REPEAT A-B at where 
you want to set the star ting point.
2 Press  REPEAT A-B again to set the 
ending point.
Repeat play star ts. »
3  To cancel repeat play, press  REPEAT A-B
again.
Note
The marked section for repeat play is only 
possible within a track /title.
View video play from different camera 
angles
1  During play, press  ANGLE repeatedly to 
display the angle options.
Play changes to the selected angle. »
Note
Applicable only to discs...

19
Play music
Control audio track play
1  Play a track.
2  Use the remote control to control the 
track. 
Button   Action
Star ts, pauses or resumes 
playback.
Stops play.
Skips to the nex t track.
Skips to the beginning of 
the current track. Press 
twice to jump to the 
previous track.
Selects an item to play.
 /Searches fast-forward 
(right) or fast-back ward 
(lef t). Press repeatedly to 
change the search speed.
REPEATSelects or turns off repeat 
or shuf e mode.
Play MP3/WMA music
MP3/ WMA is a type...

20
To go to previous or nex t screen  
display, press  
 /.
To select a photo, press the  
Navigation buttons.
To display the selected photo only,  
press  OK.
4 Press   to star t slideshow play.
To return to the menu, press   
BACK.
Note
You may require longer time to display the disc 
content on the T V due to the large number of 
songs/photos compiled onto one disc.
If the JPEG photo is not recorded with an ‘exif ’ 

type  le, the actual thumbnail picture is not be 
shown on the display. It is...