Philips Cclear Xg1air Brilliance Projector User Manual

>
Pr/Cr, Y, Pb/Cb
1Connect the Component in sockets (Pr/Cr, Y, Pb/Cb) of the projector to the appropriate
output sockets of your Component- or HDTV-video equipment (Pr, Y, Pb / Cr, Y, Cb).
For this, use the audio/video connection cable supplied(1).
2If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Video/Audio (in) L/R socketsof the projector.
For this, use an optional audio connection cable (2).
– Audio information from the Component- or HDTV-video...

<
RGBS
1Connect an optional Scar t/RCA Component Video adapter (1)to the Scar t connector of
your Component- or HDTV-video equipment 
2Connect the Component in sockets of the projector (Pr/Cr, Y, Pb/Cb) to the R, G and B
outputs of the adapter.
For this, use the audio/video connection cable supplied (2).
3Connect the Video input of the projector to the Y output of the adapter.
For this, use an optional audio/video connection cable (3).
4Select ‘RGB sync’ or ‘RGB sog’ input by pressing the Source button....

1Connect the Audio in L/R sockets of an amplifier or stereo system to the Audio Out socket
of the projector.
For this use an optional audio/video connection cable (1).
2Press Menu.
– The menu bar appears on the screen
3Use Cursor Control to move to ‘Audio’.
4Select ‘Audio Out’ using Cursor Control and select ‘On’.
• The volume can be adjusted, using the Volome control of the amplifier or the - Volume +
keys of the remote control.
Always turn down the volume control of the connected amplifier before...

General
Notes
Messages
>
1Press the Standby button on projector or remote controlto switch on the projector.
– The Standby indicator lights up orange.
– When the projection lamp is on, the Standby indicator lights up green and the star t-up
screen (when enabled) appears for several seconds.
2Switch on the computer or star t video playback.
– A feedback message appears on the screen, indicating the selected source.
3Use the Source button to select the required source:Auto, RGB sync, YPbPr, RGB sog, S-...

Feedback messages
Feedback messages are displayed in the top right corner of the screen. They are displayed e.g.
when:
– a signal comes up or goes down;
– an input source is changed;
– the PIP input source is changed;
– the Freeze, Mute or A/V Mute function is activated;
– the Key lock, or Zoom function is (de-)activated;
– the local keyboard or remote control is used when Key lock is activated.
Error messages
Error messages are displayed when there is a serious technical problem. They can occur at any...

Philips Multimedia Projector26English User guide cClear 
>
All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays
and with help of Menu, OK and Cursor Control on the projector or the remote control.
The projector is set to standard settings at the factor y. However, you can adjust these settings to
suit your own preferences.
The projector menu screens allow you to adjust the various projector settings (for both
Computer and Video). For explanation and operation see...

COMPUTER MODE
Main menu Sub menu Setting
PictureBrightness0 (min) - 100 (max)
Contrast0 (min) - 100 (max)
Mirror
Picture Format wide screen
super zoom 4:3
4:3
movie expand 14:9
movie expand 16:9
16:9 subtitles
Colour tracking vivid natural
Colour temperature warm
normal
cool
DisplayWindow mode Default
Double Window
PIP
PIP Location
Window select Main, Second window
Freeze On Off
Zoom Off, 4x, 9x, 16x
Auto Image Off On
Horizontal Size0 100
Phase0 100
Shift Cursor controlled Shift
SUBTITLES
AABB
5....

Philips Multimedia Projector28English User guide cClear 
GENERAL ADJUSTMENTS/SETTINGS
Main menu Sub menu Setting
SettingsLanguage Deutsch
English
Français
Español
Italiano
Nederlands
Por tuguês
∑
Keystone
Smar tDimmer On Off
Source Auto
RGB sync
YPbPr
RGB sog
S-Video
Video
Mutimedia
Wireless
(only available on cClear
wireless version)
DVI-RGP
DVI-YPbPr
System information OK
Factor y settings OK
Key lock Off On
Star t-up screen Philips
Logo capture
None
Lamp counter OK (3 sec)
Smar tSaveOff, 1-10, 15, 20,...

>
1Press Menu.
– The menu bar appears on the screen.
The f
irst item is highlighted and its sub menu is shown.
Depending on the selected source (Auto, RGB sync, YPbPr, RGB sog, S-Video, Video,
Mutimedia, Wireless (only available on cClear wireless version),DVI-RGP, DVI-YPbPr.) some
options of the submenu may be disabled.This indicates that these functions:
– are not available in a cer tain mode,
– have no function for the selected source.
For example:
– Horizontal size under menu ‘Settings’when Auto...

>
For computer signal input, the following‘Picture’ and ‘Display’adjustments can be made.
Picture adjustments
•Press Menu and select ‘Picture’ in the menu bar. The following ‘Picture’ adjustments can now
be made,following the instructionsunder ‘General  explanation’:
– Brightness
adjusts brightness of the displayed picture;
– Contrast
adjusts the overall contrast intensity;
– Mirror
mirrors the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;
–...