Philips Bds4241r User Manual

11
User Manual BDS4241R
3.2 REAR VIEW
1External speaker output
Connect to external speakers.
2RS-232 Connector
Connect to a PC to update software.
3Digital DVI input
Connect to digital video signals from a Set-Top box or Computer.
4RGB(VGA) input
Connect to RGB (VGA) output of Computer or Set-Top box.
5Component Video  inputs
Auto-detecting component video inputs (Y/Pb/Pr or Y/Cb/Cr) for
connecting to the component output jacks of a DVD player or
Set-Top Box.
6S-Video input
Connect S-Video signals from...

12
User Manual BDS4241R
3.3 REMOTE CONTROL
3.3.1 GENERAL FUNCTIONS
1Sound Mute On/Off
2Standby Power On/Off
Push this button to switch on the PDP from Standby mode.
Push it again to turn it off to Standby mode.
3Menu
Activates the OSD (On Screen Display) menu
4Volume +/-
Turns volume up or down.
5Channel Up/Down
Changes the TV channels sequentially.
6INPUT
Displays the available input sources.
7AUTO
- Used to adjusts the screen automatically when connected to the
Digital Visual Interface (DVI) or PC...

13
User Manual BDS4241R
3.3.2  TELETEXT FUNCTION BUTTONS
1TEXT
Activates the TELETEXT mode.
2INPUT
Displays the TELETEXT index.
3Fastext
With Fastext, you can easily access the topic and relevant pages
you want by pressing the red, green, yellow and blue buttons on
the remote control.
In TELETEXT mode, volume controls remain available, but the 
relevant symbols are not shown on the screen.
4Page Down (AUTO)
Displays the previous TELETEXT page.
5Zoom (I.SIZE)
Press the I.SIZEbutton once to zoom in on the...

14
User Manual BDS4241R
4. CONNECTIONS TO EXTERNAL EQUIPMENT
4.1  CONNECTING TO AN AERIAL
To view TV channels correctly, a signal must be received using an
antenna. Connect the aerial or network input cable to the ANT jack on
the rear of the PDP.
Note:
When installing or re-installing your PDP, be sure to use the supplied
coaxial antenna cable. If you connect using a different coaxial cable,
there is risk of noise or interference to the screen image.
(You must not use another general purpose cable.
Use...

15
User Manual BDS4241R
4.2.3  USING COMPONENT VIDEO INPUT
1  Connect the green-colored (labeled as Y) jack of the device to
the green-colored Y jack of the PDP.
2  Connect the red-colored (labeled as Pr) jack of the device to the
red-colored PR/CR jack of the PDP.
3  Connect the blue-colored (labeled as Pb) jack of the device to
the blue-colored PB/CB jack of the PDP.
4  Connect the red (R) and white (L) audio jacks of the device to the
R and L audio-in jacks of the PDP.
4.2.4 USING VIDEO INPUT
1...

16
User Manual BDS4241R
4.3 EXTERNAL AUDIO CONNECTION
4.3.1  CONNECTING EXTERNAL SPEAKER
Connect the speaker audio cable to the external speaker output jack
on the rear of the PDP matching the “+” and “-” ends of the cable with
the diagram on the PDP.
• Before connecting the speaker wire to the PDP, turn off your PDP.




 

17
User Manual BDS4241R
4.4 CONNECTING A PC
4.4.1  USING RGB (VGA) OR DVI VIDEO INPUT
1  Connect the 15-pin D-Sub RGB(VGA) connector of the PC to the
RGB-IN connector of the PDP.
If you have a PC that is equipped with a DVI (Digital Visual
Interface), you may connect the PC DVI connector from the PC to
the DVI-IN connector of the PDP.
2  For both RGB (VGA) and DVI, connect the red (R) and white (L)
audio jacks of the PC to the R and L (DVI/RGB) AUDIO IN jacks
of the PDP.
Setting Up Your Display Using...

18
User Manual BDS4241R
5. BASIC FUNCTIONS
5.1  POWERING ON / OFF
Make sure the PDP is plugged into the wall outlet with the supplied
power cord.
If the power is plugged in, the STATUS LED on the control panel will
illuminate in red color.
Using Front Panel or Remote Control
1 Press the MENUbutton on the front panel or remote control.
=> The PDP will now turn on after a brief pause. The STATUS LED
will now turn green to indicate power on status.
2  Turn off the power by pressing the POWERbutton on the...

19
User Manual BDS4241R
5.3 VOLUME ADJUSTMENT
Using Front Panel or Remote Control
1 Press the MENUbutton on the front panel or remote control.
2 Press the VOL+or VOL-button to select Audio.
3 Press the CH-button to enter the selected menu group.
4 Press the VOL+or VOL-button to adjust the sound volume.
Note:
If the PDPs built-in speakers are turned off, then the volume 
controls will not affect volume generated by the built-in speaker.
5.4 MUTE
Using Remote Control
1 Press the MUTEbutton on the remote...

20
User Manual BDS4241R
5.5 DISPLAY INFORMATION
Via Remote Control
Press the RECALLbutton to display the channel information and set-
ting status. Press again to exit.
Note:
The displayed information can differ, depending on the selected source.
001-ABCTIMER OFF
TV