Philips Bdl6551v User Manual

User Manual BDL6551V
RETURN TO THE CONTENTS
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some 
cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is 
disconnected). If so, press the INPUT button to enter the video mode. Also, make sure that the PC is connected.
• When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections....

User Manual BDL6551V
RETURN TO THE CONTENTS
6.    PIXEL DEFECT POLICY
Philips strives to deliver the highest quality products. We use some of the industrys most advanced manufacturing 
processes and practice stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in 
Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from 
pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an...

User Manual BDL6551V
RETURN TO THE CONTENTS
6.3.    BRIGHT DOT DEFECTS
Bright dot defects appear as pixels or sub-pixels that are always lit or on. These are the examples of bright dot defects:
6.4.    DARK DOT DEFECTS
Black dot defects appear as pixels or sub-pixels that are always dark or off. These are the examples of black dot 
defects:
6.5.    PROXIMITY OF PIXEL DEFECTS
Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also 
specifies...

User Manual BDL6551V
RETURN TO THE CONTENTS
7.    CLEANING AND TROUBLESHOOTING
7.1.    CLEANING
Cautions When Using the Display
• Do not bring your hands, face or objects close to the ventilation holes of the 
display. Top of display is usually very hot due to the high temperature of exhaust 
air being released through the ventilation holes. Burns or personal injuries may 
occur if any body parts are brought too close. Placing any object near the top 
of the display could also result in heat related...

User Manual BDL6551V
RETURN TO THE CONTENTS
7.2.    TROUBLESHOOTING
Symptom Possible Cause Remedy
No picture is displayed 1. The power cord is disconnected.
2. The main power switch on the back of 
the monitor is not switched on.
3. The selected input has no connection.
4. The monitor is in standby mode in VGA 
mode.1. Plug in the power cord.
2. Make sure the power switch is switched on.
3. Connect a signal connection to the monitor.
Interference displayed on 
the monitor or audible 
noise is heardCaused...

User Manual BDL6551V
RETURN TO THE CONTENTS
8.    TECHNICAL SPECIFICATIONS
Display
In/Out Terminals
GeneralItem Specifications
Screen Size (Active Area) 64.5” LCD
Aspect ratio 16:9
Number of pixels 1920 (H) x 1080 (V)
Pixel pitch 0.4845 (H) x 0.4845 (V) [mm]
Displayable colors 1.06B colors
Brightness (typical) 700 cd/m
2
Dynamic contrast ratio 3000:1
Contrast ratio (typical) 2500:1
Viewing angle 178 degrees
Item Specifications
Speaker Output Internal Speaker12W (L) + 12W (R) [RMS]/8
1 Way 1 Speaker...

User Manual BDL6551V
RETURN TO THE CONTENTS
Environmental Condition
Internal SpeakerDimension [W x H x D mm]
With Stand
Without Stand1500 x 1021.4 x 421.7 mm
1500 x 875.6 x 123 mm
We i g h t
With Stand
Without Stand55.6 Kg
50 Kg
Item Specifications
TemperatureOperational
Storage0 ~ 40 C
-20 ~ 60 C
HumidityOperational
Storage20 ~ 80% RH (No condensation)
5 ~ 95% RH (No condensation)
PressureOperational
Storage / Shipment800 ~ 1100 hPa (Altitude: 0 ~ 2,000 m)
700 ~ 1100 hPa (Altitude: 0 ~ 3,000 m)
Item...