Philips Bdl6551v User Manual

BDL6551V
www.philips.com/welcome
EN User manual
Cleaning and troubleshooting
 

User Manual BDL6551V
SAFETY AND TROUBLESHOOTING INFORMATION
Safety precautions and maintenance
Read and follow these instructions when connecting and using your monitor:
Operation:
• Keep the monitor out of direct sunlight and away from stoves or any other heat source.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
• Do not block the ventilation holes on the cabinet.
• When positioning the monitor, make sure the power plug and outlet are...

User Manual BDL6551V
Service:
• The casing cover should be opened only by qualified service personnel.
• If there is any need for any document for repair or integration, please contact with your local service center.
• Do not leave your monitor in a car/trunk under direct sun light.
Read and follow these instructions when connecting and using your computer monitor:Consult a service technician if the monitor does not operate normally, or you are not sure what procedure 
to take when the operating...

User Manual BDL6551V
REGULATORY INFORMATION
CE DECLARATION OF CONFORMITY
MMD declares under our responsibility that the product is in conformity with the following standards
• EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment)
• EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment)
• EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment)
• EN61000-3-2:2006 (Limits for Harmonic Current Emission)
•...

User Manual BDL6551V
POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All 
equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the 
form of a fuse with a nominal value no larger than 16 amperes (A).
To completely switch off...

User Manual BDL6551V
INFORMATION FOR UK ONLY
WARNING - THIS APPLIANCE MUST BE EARTHED.
Important:
This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this 
type of plug proceed as follows:
1. Remove fuse cover and fuse. 
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an 
appropriate 3-pin plug fitted in its place.
If the mains plug...

User Manual BDL6551V

Ñ+	$µC{
•5§{
>

User Manual BDL6551V
NORTH EUROPE (NORDIC COUNTRIES) INFORMATION
Placering/Ventilation
VA R N I N G :
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN 
UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VA R O I T U S :
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES,...

User Manual BDL6551V
TABLE OF CONTENTS
1.       UNPACKING AND INSTALLATION
1.1.       UNPACKING
1.2.       PACKAGE CONTENTS
1.3.       INSTALLATION NOTES
1.4.       PORTRAIT MOUNTING
2.       PARTS AND FUNCTIONS
2.1.       FRONT VIEW
2.2.       REAR VIEW
2.3.       INPUT/OUTPUT TERMINALS
2.4.       REMOTE CONTROL
2.4.1.       GENERAL FUNCTIONS
2.4.2.       INSERTING THE BATTERIES IN THE REMOTE CONTROL
2.4.3.       OPERATING RANGE OF THE REMOTE CONTROL
3.       CONNECTIONS TO EXTERNAL EQUIPMENT
3.1....

User Manual BDL6551V
6.2.       TYPES OF PIXEL DEFECTS + DOT DEFINITION
6.3.       BRIGHT DOT DEFECTS
6.4. DARK DOT DEFECTS
6.5.       PROXIMITY OF PIXEL DEFECTS
6.6.       PIXEL DEFECT TOLERANCES
7.       CLEANING AND TROUBLESHOOTING
7.1.       CLEANING
7.2.       TROUBLESHOOTING
8.       TECHNICAL SPECIFICATIONS