Philips Bdl4631v User Manual

							User Manual BDL4631V/00 
 18 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
 
Connectivity   
Before making connections: 
* First turn off the power of all the attached equipments before make connections. 
* Refer to the user man ual included in eac h separat e piece of equipment.   
Connectivity Diagram 
 
 
                                  BDL4631V  
                                                                                                    
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
 DV D player 
                               BDL4631V (second monitor)                                       Equipment with                     
                                                                                                     Digital interface            HD or laser disk player                                                                 Personal                                                  Computer      VCR                           
 
  
 
  
 
 
 
  
						

							                                         User Manual BDL4631V/00 
 
 19 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Connecting to a Personal Computer 
 As you finish the connection between the computer and the LC D monitor, you could play the contents in the computer 
and display them on the LCD monitor. 
Connecting the LCD Monitor to a Personal Computer 
•  To achieve this, apply the supplied VGA signal cable (mini D-sub 15 pin to mini D-sub 15 pin) to make con nection b etween PC and LC D  m onitor  
(PC-A IN connector). 
•  When connecting more than one LC D monitors to PC, apply another VGA signal cable (mini D-sub 15 pin to mini D-sub 15 pin; it’s com mercially  
available) to make co nn ection bet ween LC D  monitor(RG B OU T connector) and the oth er (PC-A IN connector). 
•  The AU DI O IN 1, 2, 3 or HDMI can be connected for audio input using RCA cable. After choosing one of the AUDIO IN connectors, you 
might need to select AUDI O 1, 2, 3 or HDMI using the AUDI O S OU RCE button on the remote control. HDMI (for audio) is selectable only 
when HDMI 1 or 2(for video) is selected. 
•  When connecting more than one LC D monitors to PC, apply RCA cable to make conn ection bet ween L C D monitor(AU DI O OU T connector) and  
the other (AUDI O IN 1, 2, 3). HDMI source is not suitable for this case. 
                      BDL 4631V            PC or IBM co mpatib le     To audio output                                 To analog RGB ou tput  
Mini D-sub 15 p in   
  
 
  
 
  
 
  
 
  
 
  
 
  
 RCA   
  
 Mini D-sub 15 p in                                    BDL4631V (second monitor)    
 
  
 
  
 
  
						

							User Manual BDL4631V/00 
 20 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Connecting to a Digital Interface Equipment 
 Connections can be made between LCD monitor and other digital equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard.   
Connect the LCD Monitor to a Computer with a Digital Output 
•  The HDMI 1, HDMI 2 IN connector accepts a HDMI cable. 
•  The HDMI 1, HDMI 2 IN connector can be chose to receive the video signal from HDMI output(applying HDMI to HDMI cable) or DVI-D  
output (applying HDMI to DVI cable) of PC. 
•  To ensure the display quality, use a cable with a quality prescribed by DVI standards.  
•  The AU DI O IN 1, 2, 3 or HDMI connector can be chose to receive audio source. Select AU DI O 1, 2, 3 or HDMI from the AUDI O S OU RCE 
button on the remote control. HDMI(for audio) is only selectable only when HDMI 1 or 2(for video) is selected. 
•  Note that the signal input from HDMI connector cannot be output to the RGB OU T connector.                                                                                                                                                                                                                                                                                                                                                                              BDL4631V   
  
         To audio output   
 
                                                                                                                      To HDMI output or DVI-D r   Equipment with a digit al interface such as a personal co mputer w ith RGB output (TMDS)  
 HDMI connector   
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
 
 
						

							                                         User Manual BDL4631V/00 
 
 21 
 
Connecting to a DVD Player 
 As you finish the connection between the DVD player and the LC D monitor, you could display the contents from the played DVD on the LCD 
monitor. You might like to refer to your DVD player’s manual for further information. 
 
Connect the LCD Monitor to a DVD Player 
•  To achieve this, apply a separated signaling(Y, C b/ Pb, Cr/ Pr) BNC cable (mini D-sub 15 pin to mini D-sub 15 pin) to make conn ection bet ween a  
DVD player(Y, Cb/ Pb, Cr/Pr  Out) and L C D mo nitor (C VI In). You might need BNC-to-RCA adapters(including in the accessories) to convert 
the BNC connectors to RCA connectors if you are using the separated signaling(Y,  Cb/ Pb,  Cr/Pr) RCA cable. 
•  If your DVD player supports HDMI signaling, apply HDMI to HDMI cable for the connection. 
 •  The AU DI O IN 2 , 3 (both of RCA connector type) can be used for audio input.  Select [AU DI O 1] ( for 3.5φ phone jack), [AU DI O 2], [AUDI O 3]  
Or [HDMI] from the AUDI O SOURCE button on the remote control.  HDMI (for audio) is selectable only when HDMI 1 or 2 (for video) is 
 selected. 
  
                          BDL4653V 
  
 
BDL4631V 
 
  
						

							User Manual BDL4631V/00 
 22 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Connecting to a Stereo Amplifier 
 You can connect your stereo amplifier to your LC D monitor. Refer to your amplifiers man ual for further information.   
Connect the LCD Monitor to a Stereo Amplifier 
•   Turn on the LC D monitor and the amplifier only after all connections have b een finished. 
•   Apply an RC A cable to make connection between the amplifier (audio in) and the LC D monitor (audio out). 
•   Do not reverse the audio left and right jacks. 
•   For the preferring audio signal, select [AUIDO1], [AUDIO2], [AUDIO3] or [HDMI] from the AUDI O S OU RCE button on the remote control.  
 HDMI(for audio) is selectable only when HDMI 1 or 2(for video) is selected. 
•   The AUDI O OUT RCA connectors output sound from the selected AUDI O SOURCE. 
                                   BDL4631V                                                                                                                                                                                      
 
  
 
  
 
     RCA   
 RCA   
 BNC    
 
  
 
  
 
  
 
  
 
 RCA                                                                   BNC                                                            
   
To audio left input
 
External speaker 
RCA 
To audio right 
input
 
To composite Output
 
In case of VCR
 
To audio left input
 
       BDL4631V (second monitor) 
  
						

							                                         User Manual BDL4631V/00 
 
 23 
 
 
 
 
 
Basic Operation 
 
Power ON and OFF Modes 
 The LC D monitor power indicator will turn green while powered on and will turn red while powered off. The monitor can be powered on or 
off using the following three options: 
 
 
1. Pressing the Main Power Switch.  NOTE: 
Wh en the Main Power Switch is used to power off the 
LC D monitor, the remote control, the power button and the indicator 
will not work. Make sure to turn the Main Power Switch on before 
using the oth er two options. 
 
 Main Power Switch  
 
2. Pressing the power button.  NOTE: 
Before pressing the power button, be sure to turn on the 
Main Power button on the LC D monitor. 
  
 
  
 Power Button  
  
3. Using the remote control.  NOTE: 
Before operating the remote control, be sure to turn on the Main 
Power Switch on the LC D monitor. 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
    
						

							User Manual BDL4631V/00 
 24 
 
Power Indicator 
 
 Status 
Power ON Green 
Power OFF Red 
Power Standby when “SCHEDULE” is enable Red On Green Blinking 
Power Standby Red, Green 
Diagnosis (Detecting failureF Red Blinking * See troubleshooting 
 
Using Power Management 
 The LCD monitor follows the VESA approved DPM Power Management function. The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a certain period. The power management feature on the LCD monitor has been set to the “ON” mode. This allows the system to enter a Power Saving Mode when no signal is applied.  This could potentially increase the life and decrease the power consumption of the LCD monitor.  
Display Signal of Video Source Setting to [VIDEO] 
Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO]. Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.  
Picture Size 
HDMI 1, 2, PC-A FULL NORMAL CUSTOM 
 REAL 
CVI ,   VIDEO  FULL NORMAL DYNAMIC 
 REAL CUSTOM 
 
Signal Type NORMAL SIZE Recommended Size 
4:3 
 
NORMAL 
 DYNAMIC 
 
Squeeze 
 
FULL 
  NORMAL: Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at CVI or VIDEO signal. 
FULL: Display in the entire screen. 
DYNAMIC:   Expand 4:3 pictures to the entire screen with non-linearity. (Some round image might be cut by expansion.)  
CUSTOM  (ZOOM): Images can  be  expanded  beyond  the  active  display  area. The  image which  is  outside  of the active  display  area would not be 
shown. 
REAL: Image will be displayed for one by one pixel. 
 ZOOM 
  ZOOM 
 
						

							                                         User Manual BDL4631V/00 
 
 25 
 
Smart Picture Mode 
HDMI 1, 2, PC-A HIGHBRIGTH STANDARD sRGB 
 
CVI, VIDEO  HIGHBRIGTH STANDARD CINEMA 
 
 
Audio Source Switching 
 
You can select the audio source using the AUDIO SOURCE button on the remote control.  HDMI 1, 2 HDMI AUDIO1 AUDIO2 AUDIO3 
 
Other than HDMI 1, 2  AUDIO1 AUDIO2 AUDIO3 
 
 
Control Lock Mode 
This function disables the operation o buttons so that the adjustments you make are not active when they are pressed. 
To disable the buttons, press and hold down the  and  buttons together for at least 3 seconds. 
To enable the buttons, press and hold down the  and  buttons together for at least 3 seconds again. 
 
OSD Information  
 
HDMI, 2, PC-A  PC-A 
1024 x 768 48 kHz  6 0 Hz AUDIO : 1 SIZE : F ULL 
     Video Source 
      Input signal Information 
    Audio Source     Picture Size     
CVI  CVI AUDIO : 3 SIZE : F ULL 
      Video Source     Audio Source     Picture Size  
 
VIDEO, VIDEO  VIDE O NT SC  AUDIO :3 SIZE : NOR MA L 
     Video Source     Color System of Input Signal  Audio Source Picture Size   
PIP or POP 
Mai n:PC-A 
Sub:VI DE O  PC-A 
1024 x 768 48 kHz  6 0 Hz AUDIO : 1 VIDE O NT SC SIZE : F ULL 
   
 
     Main picture Information 
 
     Sub picture Information      Main picture Information 
 
 
						

							User Manual BDL4631V/00 
 26 
 
 
 
 
 
 
 
OSD (On-Screen-Display) Controls 
  
  
 
 
 Remote Control 
  
 
  
 
  
 
  
 Control Panel 
Press ME NU button to open Main menu.   Press UP or DO WN button to select sub-menu. 
 
   
 Press E XI T button to open Main menu. Press UP or DO WN button to select. 
Press SET button to enable setting.    
    Press INPUT button to enabl e th e setting. 
Press UP or DOWN, and PLUS or  MI NUS button to sel ect func tio n, or adjust  the  setting. Press S E T button to enabl e the  set ting. 
 
    Press UP or DO WN, and PLUS or MINUS button to select function, or adjust the setting. Press INPUT button to enabl e the  set ting. 
Press ME NU or E XI T button to exit.    
   
 Press E XI T button to exit. 
 
 
 
    UP or DOW N button      INPUT button  “-” “+” button E XI T button   
 OSD screen    
   
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
    
						

							                                         User Manual BDL4631V/00 
 
 27 
 
Main-Menu   
PICTURE 
BRIGHTNESS  Adjusts the ov erall image and background screen brightness.  Press + button to increase brightness. Press - button to decrease brightness.     
 
 
 CONTRAST  Adjusts the image brightness for the input signal.  Press + button to increase contrast. Press - button to decrease contrast.      
 
 SHARPNESS  This function is digitally capable to keep crisp image at any timings. It is adjustable to get a distinct image or a soft on e as you prefer and set independently for eac h  
picture mode.  
Press + button to increase sharpness. Press - button to decrease sharpness.      
 BLACK LEVEL  Adjusts the image brightness for the background.  Press + button to increase black level. Press - button to decrease black level. NOTE: sR GB picture mode is standard and cannot be changed.       
 NOISE REDUCTION * : INP UT VIDE O< S>, VIDEO only  Adjusts the noise reduction lev el. Press + button to increase reduction lev el.  
Press - button to decrease reduction lev el.