Philips Bdl3221vs User Manual

Product Information
• Temperature (operating)5° C to 35° C
• Relative humidity  20% to 80%
• System MTBF 50K hrs (excluding CCFL 50Khrs)
 
* This data is subject to change without notice.
 
RETURN TO TOP OF THE PAGE
Pin Assignment
1. The digital only connector (DVI-D) contains 24 signal contacts orga\
nized in three rows of eight 
contacts. Signal pin assignments are listed in the following table: 
Pin No.  Signal 
Assignment
 Pin 
No.  Signal 
Assignment
 Pin 
No.
Signal 
Assignment
1 T.M.D.S. Data2-
9...

Product Information
2. The 15-pin D-sub connector (male) of the signal cable: 
Pin No.  Assignment
Pin 
No.  Assignment
1 Red video input 
9 DDC +5V 
2
 Green video input 10 Cable detect
3
 Blue video input 11 Identical output, 
connected to pin 10
4
 Ground 12 Serial data line (SDA)
5
 NC 13 H. Sync / H+V
6
 Red video ground 14 V. Sync
7
 Green video ground 15 Data clock line (SCL)
8
 Blue video ground
3. RS232 Connector
D-sub 9-pin male connector for communication with plasma engine or PC.
Pin No....

Product Information
6DCE Ready (DSR) 
5 Signal Ground (SG) 
1 Received Line Signal Detector (DCD) 
4 DTE Ready (DTR) 
9 Ring Indicator 
4. SCART Connector
Pin  No.
 
Signal Pin 
No.
 
1 Audio right channel output (0.5 Vrms, < 1K 
ohms)  2
2 Audio right channel input (0.5 Vrms, > 10K 
ohms)  1
3 Audio left channel output (0.5 Vrms, < 1K 
ohms)  6
4 Audio ground  4
5 Blue signal ground  5
6 Audio left channel input (0.5 Vrms, > 10K 
ohms)  3
7 Blue signal I/O (0.7 Vp-p, 75 ohms)  7
8 Function switching...

Product Information
12Intercommunication data line No. 2  12
13 Red signal ground  13
14 Blanking signal ground  14
15 Red signal I/O (0.7 Vp-p, 75 ohms)  15
16 Blanking signal I/O (L: < 0.4V, H: >1.0V, 75 
ohms)  16
17 Composite video signal ground  18
18 Blanking signal ground  17
19 Composite video signal output (1 Vp-p, 75 
ohms, sync: negative)  20
20 Composite video signal input (1 Vp-p, 75 
ohms, sync: negative)  19
21 Plug shield (common ground)  21
 
RETURN TO TOP OF THE PAGE
Product Views...

Product Information
RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/PRODUCT/product.htm \
(10 of 10)2006-03-10 1:33:39 PM 

Installing your LCD Monitor
Installing your LCD Monitor
Product Description • Connecting to Your PC, DVD/VCR etc. • Getting Started • Optimizing Performance 
Product Description
Installing your LCD Monitor
Side View (Left)
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/install.htm \
(1 of 5)2006-03-10 1:33:39 PM 

Installing your LCD Monitor
 
1INPUTSelecting input source
2
  
Increase or decrease the channel number
or
moving up or down to highlight the function in OSD
3
 
Increase or decrease the level of audio volume
or
moving left or right to highlight the sub-menu in the selected function \
of OSD
4
MENUOpen the OSD or confirm the selected function
5
 DC power switch On/Off
RETURN TO TOP OF THE PAGE
Side View (Right)
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/install.htm \
(2 of 5)2006-03-10...

Installing your LCD Monitor
  
1Audio input for composite input Audio (left and right) in put for compo site 
signal in put. 
2 Composite input Composite (CVBS) signal input
3 S-Video input S-Video signal input
4 Earphone output Earphone output 
RETURN TO TOP OF THE PAGE
Rear View
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/install.htm \
(3 of 5)2006-03-10 1:33:39 PM 

Installing your LCD Monitor
1AC in AC power in
2 AC power  AC power switch
3 Speakers output External speakers output
4 D-Sub output PC analog D-Sub output
5 DVI-D input PC digital input 
6 D-Sub input PC analog D-Sub input
7 RS232 input RS232 network connection Input
8 RS232 output RS232 network connection output for the use of 
loop through function 
9 PC audio PC stereo audio input
10 Audio input for component signal Audio (left and right) input for component signal 
input 
11 Component input...

Installing your LCD Monitor
14External / EURO-AV SCART connection (for the use of European 
model only)
15 Kensington lock Kensington lock 
 Optimising Performance
l     For best performance, ensure that your display settings are set at 1360x\
768, 60Hz.
 
Note: You can check the current display settings by pressing the MENU button\
 
once. 
l     You can also install the Flat Panel Adjust (FP Adjust) program, a prog\
ram for getting the best performance 
out of your monitor. This is included on this...