Philips Bdl3221v User Manual

							
Product Information
• Dimension (WxHxD) *incl. Pedestal, Speakers: 1014mm x 517mm x 244mm (39.9 
x 20.3 x 9.6)
w/o Pedestal, Speakers:794mm x 490mm x 130mm (31.2 x 
19.3 x 5.1)
 
• Weight 
19.2 kg (incl. Pedestal, Speakers)
• Power supply 100 — 240 VAC, 60 — 50 Hz
• Power consumption  PC Mode: 100 W (typ.)
TV Mode: 130 W (typ.)
• Temperature (operating) 5° C to 35° C
• Relative humidity  20% to 80%
• System MTBF 50K hrs (excluding CCFL 50Khrs)
 
* This data is subject to change without notice.
 
RETURN TO TOP OF THE PAGE
Pin Assignment
1. The digital only connector (DVI-D) contains 24 signal contacts orga\
nized in three rows of eight 
contacts. Signal pin assignments are listed in the following table: 
Pin No.  Signal 
AssignmentPin 
No.  Signal 
AssignmentPin 
No.
Signal 
Assignment
1 T.M.D.S. Data2-
9 T.M.D.S. Data1-17T.M.D.S. Data0-
2
 T.M.D.S. Data2+ 10 T.M.D.S. Data1+18T.M.D.S. Data0+
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/PRODUCT/PRODUCT.HT\
M (6 of 10)2005-11-07 12:47:57 PM 
						

							
Product Information
  3 T.M.D.S. Data2/4 
Shield11 T.M.D.S. Data1/3 
Shield19T.M.D.S. Data0/5 
Shield
4
 No connect  12 No connect 20No connect 
5
 No connect  13 No connect 21No connect 
6
 DDC Clock  14 +5V Power 22T.M.D.S. Clock 
Shield
7
 DDC Data  15 Hot Plug Detect23T.M.D.S. Clock+
8
 No connect  16Ground (for +5V) 24T.M.D.S. Clock-
 
2. The 15-pin D-sub connector (male) of the signal cable: 
Pin 
No.  Assignment
Pin 
No.  Assignment
1 Red video input 
9 DDC +5V 
2
 Green video input 10 Cable detect
3
 Blue video input 11 Identical output, 
connected to pin 10
4
 Ground 12 Serial data line (SDA)
5
 NC 13 H. Sync / H+V
6
 Red video ground 14 V. Sync
7
 Green video ground 15 Data clock line (SCL)
8
 Blue video ground
3. RS232 Connector
D-sub 9-pin male connector for communication with plasma engine or PC.
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/PRODUCT/PRODUCT.HT\
M (7 of 10)2005-11-07 12:47:57 PM 
						

							
Product Information
Pin No. RS-232 (EIA-232-A) Function
3 Transmit Data (TD) from DTE to DCE 
2 Receive Data (RD) from DCE to DTE 
7 Request to Send (RTS) 
8 Clear to Send (CTS) 
6 DCE Ready (DSR) 
5 Signal Ground (SG) 
1 Received Line Signal Detector (DCD) 
4 DTE Ready (DTR) 
9 Ring Indicator 
4. SCART Connector
Pin  No.
 
Signal Pin 
No.
 
1 Audio right channel output (0.5 Vrms, < 1K 
ohms)  2
2 Audio right channel input (0.5 Vrms, > 10K 
ohms)  1
3 Audio left channel output (0.5 Vrms, < 1K 
ohms)  6
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/PRODUCT/PRODUCT.HT\
M (8 of 10)2005-11-07 12:47:57 PM 
						

							
Product Information
4Audio ground  4
5 Blue signal ground  5
6 Audio left channel input (0.5 Vrms, > 10K 
ohms)  3
7 Blue signal I/O (0.7 Vp-p, 75 ohms)  7
8 Function switching I/O (L: < 2V, H: > 10V, 10K 
ohms)  8
9 Green signal ground  9
10 Intercommunication data line No. 1  10
11 Green signal I/O (0.7 Vp-p, 75 ohms)  11
12 Intercommunication data line No. 2  12
13 Red signal ground  13
14 Blanking signal ground  14
15 Red signal I/O (0.7 Vp-p, 75 ohms)  15
16 Blanking signal I/O (L: < 0.4V, H: >1.0V, 75 
ohms)  16
17 Composite video signal ground  18
18 Blanking signal ground  17
19 Composite video signal output (1 Vp-p, 75 
ohms, sync: negative)  20
20 Composite video signal input (1 Vp-p, 75 
ohms, sync: negative)  19
21 Plug shield (common ground)  21
 
RETURN TO TOP OF THE PAGE
Product Views
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/PRODUCT/PRODUCT.HT\
M (9 of 10)2005-11-07 12:47:57 PM 
						

							
Product Information
Follow the links to see various views of the monitor and its components.\
Product Description
Serial Interface Comunication ProtocolLink
SICP Protocol.pdf
 
RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/PRODUCT/PRODUCT.HT\
M (10 of 10)2005-11-07 12:47:57 PM 
						

							
Installing your LCD Monitor/TV
Installing your LCD Monitor/TV
Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc. • Getting Started • Optimizing 
Performance 
Product Description
Installing your LCD Monitor/TV
Side View (Left)
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/INSTALL/INSTALL.HT\
M (1 of 5)2005-11-07 12:48:00 PM 
						

							
Installing your LCD Monitor/TV
 
1INPUTSelecting input source
2
  Increase or decrease the channel number
or
moving up or down to highlight the function in OSD
3
 
Increase or decrease the level of audio volume
or
moving left or right to highlight the sub-menu in the selected function \
of OSD
4
MENUOpen the OSD or confirm the selected function
5
 DC power switch On/Off
RETURN TO TOP OF THE PAGE
Side View (Right)
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/INSTALL/INSTALL.HT\
M (2 of 5)2005-11-07 12:48:00 PM 
						

							
Installing your LCD Monitor/TV
  
1Audio input for composite input Audio (left and right) in put for compo site 
signal in put. 
2 Composite input Composite (CVBS) signal input
3 S-Video input S-Video signal input
4 Earphone output Earphone output 
5 TV tuner TV tuner input (available in TV version only)
RETURN TO TOP OF THE PAGE
Rear View
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/INSTALL/INSTALL.HT\
M (3 of 5)2005-11-07 12:48:00 PM 
						

							
Installing your LCD Monitor/TV
1AC in AC power in
2 Speakers output External speakers output
3  D-Sub output PC analog D-Sub output
4 DVI-D input PC digital input 
5 D-Sub input PC analog D-Sub input
6  RS232 input RS232 network connection Input
7 RS232 output RS232 network connection output for the use of 
loop through function 
8 PC audio PC stereo audio input
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/INSTALL/INSTALL.HT\
M (4 of 5)2005-11-07 12:48:00 PM 
						

							
Installing your LCD Monitor/TV
9Audio input for component signal Audio (left and right) input for component signal 
input 
10 Component input Component (YP
bPr ) signal input
11 Composite output Composite (CVBS) output for the use of loop 
through function
12 Audio output for composite output Audio (left and right) out put for compo site signal 
out put. 
13 External / EURO-AV SCART connection (for the use of European 
model only)
14 Kensington lock Kensington lock 
 Optimising Performance
l     For best performance, ensure that your display settings are set at 1360x\
768, 60Hz.
 
Note: You can check the current display settings by pressing the MENU button\
 
once. 
l     You can also install the Flat Panel Adjust (FP Adjust) program, a prog\
ram for getting the best performance 
out of your monitor. This is included on this CD. Step-by-step instructi\
ons are provided to guide you 
through the installation process. Click on the link to find out more abo\
ut this program. 
More about 
 FP_setup04.exe
 
RETURN TO TOP OF THE PAGE 
 
 
  
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/INSTALL/INSTALL.HT\
M (5 of 5)2005-11-07 12:48:00 PM