Philips Bdl3221v User Manual
Here you can view all the pages of manual Philips Bdl3221v User Manual. The Philips manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
Note: While Standby bit is set, the SICP engine accepts only STANDBY com\
mand in
miscellaneous group is accepted.
3.2.3 General sequence: frame format
A message can be sent to the monitor to execute a command or to ask for \
any
information; each message is enclosed in a frame, which consists of the \
following:
...
where:
= , i.e. ASCII characters [1Bh] and [24h].
= 3 ASCII characters each of which ranging from [30h] to [39h], which are \
used as monitor address....](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-90.png "Page 91
Note: While Standby bit is set, the SICP engine accepts only STANDBY com\
mand in
miscellaneous group is accepted.
3.2.3 General sequence: frame format
A message can be sent to the monitor to execute a command or to ask for \
any
information; each message is enclosed in a frame, which consists of the \
following:
...
where:
= , i.e. ASCII characters [1Bh] and [24h].
= 3 ASCII characters each of which ranging from [30h] to [39h], which are \
used as monitor address....")
Note: While Standby bit is set, the SICP engine accepts only STANDBY com\
mand in
miscellaneous group is accepted.
3.2.3 General sequence: frame format
A message can be sent to the monitor to execute a command or to ask for \
any
information; each message is enclosed in a frame, which consists of the \
following:
...
where:
= , i.e. ASCII characters [1Bh] and [24h].
= 3 ASCII characters each of which ranging from [30h] to [39h], which are \
used as monitor address....
Page 92
![Page 92
... \
where:
= The ASCII character [06h], to tell the transmitter that the command has
been acknowledged.
= The ASCII characters [15h], to tell the transmitter that the command
has not been acknowledged, because the command itself is not valid
for any reason.
= , i.e. ASCII characters [1Bh] and [25h].
= 3 ASCII characters each of which ranging from [30h] to [39h], which are
used as monitor address.
= An ASCII character which identifies the command type, i.e. the...](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-91.png "Page 92
... \
where:
= The ASCII character [06h], to tell the transmitter that the command has
been acknowledged.
= The ASCII characters [15h], to tell the transmitter that the command
has not been acknowledged, because the command itself is not valid
for any reason.
= , i.e. ASCII characters [1Bh] and [25h].
= 3 ASCII characters each of which ranging from [30h] to [39h], which are
used as monitor address.
= An ASCII character which identifies the command type, i.e. the...")
... \
where:
= The ASCII character [06h], to tell the transmitter that the command has
been acknowledged.
= The ASCII characters [15h], to tell the transmitter that the command
has not been acknowledged, because the command itself is not valid
for any reason.
= , i.e. ASCII characters [1Bh] and [25h].
= 3 ASCII characters each of which ranging from [30h] to [39h], which are
used as monitor address.
= An ASCII character which identifies the command type, i.e. the...
Page 93
![Page 93
TV TUNER
COMPOSITE
S VIDEO
EXT •
HDTV
3.3.1 Geometry Group
3.3.1.1 VIDEO MODE
Command: VM
Function: Set the format of the screen output for video inputs.
Data Range:
[00h] – WIDE SCREEN(STANDARD MODE)
[01h] – 4:3
[02h] – ZOOM 16:9 (FULL SCREEN)
[03h] – SUPER WIDE (NONLINEAR SCALING)
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.1.2...](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-92.png "Page 93
TV TUNER
COMPOSITE
S VIDEO
EXT •
HDTV
3.3.1 Geometry Group
3.3.1.1 VIDEO MODE
Command: VM
Function: Set the format of the screen output for video inputs.
Data Range:
[00h] – WIDE SCREEN(STANDARD MODE)
[01h] – 4:3
[02h] – ZOOM 16:9 (FULL SCREEN)
[03h] – SUPER WIDE (NONLINEAR SCALING)
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.1.2...")
TV TUNER COMPOSITE S VIDEO EXT • HDTV 3.3.1 Geometry Group 3.3.1.1 VIDEO MODE Command: VM Function: Set the format of the screen output for video inputs. Data Range: [00h] – WIDE SCREEN(STANDARD MODE) [01h] – 4:3 [02h] – ZOOM 16:9 (FULL SCREEN) [03h] – SUPER WIDE (NONLINEAR SCALING) Model Source PAL NTSC AP CHINA PC ANALOG PC DIGITAL (DVI) HDCP • • • • TV TUNER • • • • COMPOSITE • • • • S VIDEO • • • • EXT • • • • HDTV • • • • 3.3.1.2...
Page 94
![Page 94
S VIDEO
EXT
HDTV
3.3.1.3 PIP POSITION
Command: PP
Function: Control the PIP position.
Data Range:
[00h] – Upper left corner
[01h] – Upper right corner
[02h] – Bottom right corner
[03h] – Bottom left corner
This command is only supported in PC Analog/Digital inputs and when the
PIP is not OFF.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP
TV TUNER
COMPOSITE
S VIDEO
EXT
HDTV
3.3.1.4 ZOOM...](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-93.png "Page 94
S VIDEO
EXT
HDTV
3.3.1.3 PIP POSITION
Command: PP
Function: Control the PIP position.
Data Range:
[00h] – Upper left corner
[01h] – Upper right corner
[02h] – Bottom right corner
[03h] – Bottom left corner
This command is only supported in PC Analog/Digital inputs and when the
PIP is not OFF.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP
TV TUNER
COMPOSITE
S VIDEO
EXT
HDTV
3.3.1.4 ZOOM...")
S VIDEO EXT HDTV 3.3.1.3 PIP POSITION Command: PP Function: Control the PIP position. Data Range: [00h] – Upper left corner [01h] – Upper right corner [02h] – Bottom right corner [03h] – Bottom left corner This command is only supported in PC Analog/Digital inputs and when the PIP is not OFF. Model Source PAL NTSC AP CHINA PC ANALOG • • • • PC DIGITAL (DVI) • • • • HDCP TV TUNER COMPOSITE S VIDEO EXT HDTV 3.3.1.4 ZOOM...
Page 95
![Page 95
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.1.5 ZOOM ID
Command: ZD
Function: Select Zoom ID .
Data Range: It depend on zoom type.
[00h] : [00h] ----- Zoom type 1x1(Zoom off)
[00h] : [0Fh] ----- Zoom type 4x4
[00h] : [08h] ----- Zoom type 3x3
[00h] : [03h] ----- Zoom type 2x2
[00h] : [04h] ----- Zoom type 1x5
0
•0 •1 •2 •3
•4 •5 •6 •7
•8 •9 •A •B
•C •D •E •F
•0 •1 •2
•3 •4 •5
•6 •7 •8
•0 •1
•2 •3...](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-94.png "Page 95
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.1.5 ZOOM ID
Command: ZD
Function: Select Zoom ID .
Data Range: It depend on zoom type.
[00h] : [00h] ----- Zoom type 1x1(Zoom off)
[00h] : [0Fh] ----- Zoom type 4x4
[00h] : [08h] ----- Zoom type 3x3
[00h] : [03h] ----- Zoom type 2x2
[00h] : [04h] ----- Zoom type 1x5
0
•0 •1 •2 •3
•4 •5 •6 •7
•8 •9 •A •B
•C •D •E •F
•0 •1 •2
•3 •4 •5
•6 •7 •8
•0 •1
•2 •3...")
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.1.5 ZOOM ID
Command: ZD
Function: Select Zoom ID .
Data Range: It depend on zoom type.
[00h] : [00h] ----- Zoom type 1x1(Zoom off)
[00h] : [0Fh] ----- Zoom type 4x4
[00h] : [08h] ----- Zoom type 3x3
[00h] : [03h] ----- Zoom type 2x2
[00h] : [04h] ----- Zoom type 1x5
0
•0 •1 •2 •3
•4 •5 •6 •7
•8 •9 •A •B
•C •D •E •F
•0 •1 •2
•3 •4 •5
•6 •7 •8
•0 •1
•2 •3...
Page 96
![Page 96
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
TV TUNER
COMPOSITE
S VIDEO
EXT
HDTV
3.3.2.2 STANDBY
Command: SB
Function: Standby ON/OFF.
Data Range:
[00h] – Standby OFF
[01h] – Standby ON
“Standby ON” means the set enters standby mode.
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •...](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-95.png "Page 96
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
TV TUNER
COMPOSITE
S VIDEO
EXT
HDTV
3.3.2.2 STANDBY
Command: SB
Function: Standby ON/OFF.
Data Range:
[00h] – Standby OFF
[01h] – Standby ON
“Standby ON” means the set enters standby mode.
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •...")
Model Source PAL NTSC AP CHINA PC ANALOG PC DIGITAL (DVI) HDCP TV TUNER COMPOSITE S VIDEO EXT HDTV 3.3.2.2 STANDBY Command: SB Function: Standby ON/OFF. Data Range: [00h] – Standby OFF [01h] – Standby ON “Standby ON” means the set enters standby mode. Query is not supported in this command. Model Source PAL NTSC AP CHINA PC ANALOG PC DIGITAL (DVI) HDCP • • • • TV TUNER • • • • COMPOSITE • • • • S VIDEO • • • • EXT • • • •...
Page 97
![Page 97
HDCP • • • •
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.2.4 FACTORY RESET
Command: RE
Function: Reset system to default state.
Data Range:
The following values are applied only if PC analog/digital input is
selected.
[00h] – Position settings only
Recall all those settings of the current timing, including
horizontal/vertical position, phase and clock.
This option has no effect in PC digital input.
[01h] – Color settings only
Reset color...](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-96.png "Page 97
HDCP • • • •
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.2.4 FACTORY RESET
Command: RE
Function: Reset system to default state.
Data Range:
The following values are applied only if PC analog/digital input is
selected.
[00h] – Position settings only
Recall all those settings of the current timing, including
horizontal/vertical position, phase and clock.
This option has no effect in PC digital input.
[01h] – Color settings only
Reset color...")
HDCP • • • • TV TUNER • • • • COMPOSITE • • • • S VIDEO • • • • EXT • • • • HDTV • • • • 3.3.2.4 FACTORY RESET Command: RE Function: Reset system to default state. Data Range: The following values are applied only if PC analog/digital input is selected. [00h] – Position settings only Recall all those settings of the current timing, including horizontal/vertical position, phase and clock. This option has no effect in PC digital input. [01h] – Color settings only Reset color...
Page 98
![Page 98
3.3.2.5 SLEEP TIMER
Command: SL
Function: Set the sleep timer for all video inputs.
Data Range:
[00h] – OFF
[01h] – 15 minutes
[02h] – 30 minutes
[03h] – 45 minutes
[04h] – 60 minutes
[05h] – 90 minutes
[06h] – 120 minutes
[07h] – 180 minutes
[08h] – 240 minutes
Query is not applicable in this command.
This command is not supported in PC Analog/Digital inputs.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
TV TUNER • • • •
COMPOSITE...](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-97.png "Page 98
3.3.2.5 SLEEP TIMER
Command: SL
Function: Set the sleep timer for all video inputs.
Data Range:
[00h] – OFF
[01h] – 15 minutes
[02h] – 30 minutes
[03h] – 45 minutes
[04h] – 60 minutes
[05h] – 90 minutes
[06h] – 120 minutes
[07h] – 180 minutes
[08h] – 240 minutes
Query is not applicable in this command.
This command is not supported in PC Analog/Digital inputs.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
TV TUNER • • • •
COMPOSITE...")
3.3.2.5 SLEEP TIMER Command: SL Function: Set the sleep timer for all video inputs. Data Range: [00h] – OFF [01h] – 15 minutes [02h] – 30 minutes [03h] – 45 minutes [04h] – 60 minutes [05h] – 90 minutes [06h] – 120 minutes [07h] – 180 minutes [08h] – 240 minutes Query is not applicable in this command. This command is not supported in PC Analog/Digital inputs. Model Source PAL NTSC AP CHINA PC ANALOG PC DIGITAL (DVI) HDCP • • • • TV TUNER • • • • COMPOSITE...
Page 99
![Page 99
3.3.2.7 CHANNEL SEARCH
Command: SE
Function: Automatically search all existing channels.
Data Range:
No data is required for this command.
Query is not applicable in this command.
This command is only supported in TV models.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
TV TUNER • • • •
COMPOSITE
S VIDEO
EXT
HDTV
3.3.2.8 REMOTE CONTROLLER
Command: RC
Function: Enable/Disable remote controller.
Data Range:
[00h] – Disable....](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-98.png "Page 99
3.3.2.7 CHANNEL SEARCH
Command: SE
Function: Automatically search all existing channels.
Data Range:
No data is required for this command.
Query is not applicable in this command.
This command is only supported in TV models.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
TV TUNER • • • •
COMPOSITE
S VIDEO
EXT
HDTV
3.3.2.8 REMOTE CONTROLLER
Command: RC
Function: Enable/Disable remote controller.
Data Range:
[00h] – Disable....")
3.3.2.7 CHANNEL SEARCH Command: SE Function: Automatically search all existing channels. Data Range: No data is required for this command. Query is not applicable in this command. This command is only supported in TV models. Model Source PAL NTSC AP CHINA PC ANALOG PC DIGITAL (DVI) HDCP TV TUNER • • • • COMPOSITE S VIDEO EXT HDTV 3.3.2.8 REMOTE CONTROLLER Command: RC Function: Enable/Disable remote controller. Data Range: [00h] – Disable....
Page 100
![Page 100
[00h] – Enable keypad function.
[01h] – Disable keypad function.
Once the keypad controller is disabled by this command, the controller
can be reactivated for a period of time from wake up or power on
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.3 Picture Group
3.3.3.1 LANGUAGE
Command: LA
Function: Select the OSD...](http://img.usermanuals.tech/thumb/59/54393/w300_philips_bdl3221v-user-manual-99.png "Page 100
[00h] – Enable keypad function.
[01h] – Disable keypad function.
Once the keypad controller is disabled by this command, the controller
can be reactivated for a period of time from wake up or power on
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
TV TUNER • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
HDTV • • • •
3.3.3 Picture Group
3.3.3.1 LANGUAGE
Command: LA
Function: Select the OSD...")
[00h] – Enable keypad function. [01h] – Disable keypad function. Once the keypad controller is disabled by this command, the controller can be reactivated for a period of time from wake up or power on Query is not supported in this command. Model Source PAL NTSC AP CHINA PC ANALOG • • • • PC DIGITAL (DVI) • • • • HDCP • • • • TV TUNER • • • • COMPOSITE • • • • S VIDEO • • • • EXT • • • • HDTV • • • • 3.3.3 Picture Group 3.3.3.1 LANGUAGE Command: LA Function: Select the OSD...